Electronic Lab Test Measurement Equipment Day 1 of 3 day event

[THERMO SCIENTIFIC SOFTFIT-L PIPETTE TIP RELOAD SYSTEM 1 GREEN TRAY ONLY] [SP BEL-ART REVERSIBLE PCR AND MICROCENTRIFUGE TUBE RACK; FOR 0.2ML OR 1.5-2.0ML TUBES, 80 PLACES, BLUE] [THERMO SCIENTIFIC CRYOTUBE HOLDERS] [LABCON REUSABLE RACKS FOR 50ML CENTRIFUGE TUBES, PURPLE] ASSORTED SIZED PIPETTE TIP RELOAD TUBE HOLDERS & CRYOTUBE HOLDERS (8) - MANUFACTURER: THERMO SCIENTIFIC MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THESE PIPETTE HOLDERS HAVE SOME MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE. ONE OF THE PURPLE 50ML CENTRIFUGE TUBE HOLDERS IS DAMAGED BUT ALL THE OTHERS ARE IN GREAT CONDITION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THESE PIPETTE HOLDERS WERE REMOVED FROM A WORKING ENVIRONMENT AND HAVE ONLY BEEN PHYSICALLY INSPECTED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) THERMO SCIENTIFIC SOFTFIT-L PIPETTE TIP RELOAD SYSTEM 1 GREEN TRAY ONLY (1) SP BEL-ART REVERSIBLE PCR AND MICROCENTRIFUGE TUBE RACK; FOR 0.2ML OR 1.5-2.0ML TUBES, 80 PLACES, BLUE (4) THERMO SCIENTIFIC CRYOTUBE HOLDERS (2) LABCON REUSABLE RACKS FOR 50ML CENTRIFUGE TUBES, PURPLE SPECIFICATIONS: MANUFACTURER: THERMO SCIENTIFIC DESCRIPTION: SOFTFIT-L PIPETTE TIP RELOAD SYSTEM 1 GREEN TRAY ONLY HOLDS 96 MANUFACTURER: SP BEL-ART DESCRIPTION: REVERSIBLE PCR AND MICROCENTRIFUGE TUBE RACK; FOR 0.2ML OR 1.5-2.0ML TUBES 80 PLACES BLUE MANUFACTURER: THERMO SCIENTIFIC DESCRIPTION: CRYOTUBE HOLDERS HOLDS 50 MANUFACTURER: LABCON DESCRIPTION: REUSABLE RACKS FOR 50ML CENTRIFUGE TUBES, PURPLE SKU: Y08S013 1B-07-04(1) 5LBS - 12IN X 12IN X 12IN

[HP 3478A] DIGITAL MULTIMETER DMM 5-1/2 DIGIT HP-IB/GPIB 2-WIRE/4-WIRE FRONT/REAR - MANUFACTURER: HEWLETT PACKARD HP MODEL: 3478A CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS METER IS IN FAIR COSMETIC CONDITION. THE UNIT LOOKS AND FEELS DIRTY, AND HAS MANY MINOR SCUFFS/STAINS/SPOTS OF RESIDUES FROM PRIOR USE. THE FRONT PANEL HAS A TAPE APPLIED WITH THE SERIAL NUMBER OVER THE DISPLAY. THAT TAPE IS STUCK ON THERE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS METER IS IN PARTIAL WORKING CONDITION. THE POWER-ON SELF-TEST GIVES A "SELF TEST OK" MESSAGE. THE BUTTONS ON THE CONTROL PANEL WORK, BUT SOME REQUIRE A VERY FIRM PRESS TO OPERATE. ALL THE MEASUREMENTS FROM THE FRONT PANEL INPUTS ON AC AND DC VOLTS, AC AND DC CURRENT, 2-WIRE AND 4-WIRE OHMS WERE CLOSE TO WHAT WE WOULD GET ON OUR REFERENCE METER. THE DISPLAY IS CLEAR AND EASY TO READ. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 3478A MULTIMETER SPECIFICATIONS: MANUFACTURER: HEWLETT-PACKARD MODEL: 3478A DIGITAL MULTIMETER 3-1/2 TO 5-1/2 DIGIT RESOLUTION (USER SELECTABLE OR AUTORANGE) HP-IB/GPIB COMPATIBLE FRONT- AND REAR-PANEL INPUTS SKU: Y33D014 1E-06-04(1) 10LBS - 18IN X 12IN X 8IN

1989 SCIENTIFIC INSTRUMENT COMPANY FS50 FINESCOPE VIDEO MEASURING MICROSCOPE SONY 4"X2"XY 0.00002" DIGITAL MICROSCOPE: MITUTOYO FS50 FINESCOPE STEREO VIEWING TUBES TRINOCULAR OPTICS (CAMERA IS INCLUDED) EFFECTIVE MAGNIFICATION RANGE: 10X TO 200X AS EQUIPPED 1X TO 2X VARIABLE ZOOM 4-PLACE OBJECTIVE TURRET M PLAN APO OBJECTIVE LENSES: 1X, 2X, 5X, 10X LONG WORKING DISTANCE OBJECTIVE LENSES 10X/21B HIGH EYEPOINT EYEPIECES CAN BE USED WITH GLASSES/GOGGLES INTERPUPILLARY SPACING ADJUSTABLE 51-76MM COARSE AND FINE FOCUS ADJUSTMENTS ACCEPTS REFLECTED LIGHT ILLUMINATOR COLOR VIDEO CAMERA DISPLAYS ON LCD MONITOR IN 4:3 ASPECT RATIO FOCUS MOUNT/STAND: BLACK GRANITE BASE 18" X 18" X 3.5" FROM STANDRIDGE GRANITE STAND/FOCUS MOUNT FROM SIC RIGHT AND LEFT COARSE FOCUS ADJUSTMENTS MANUAL POSITION CONTROL OF X AND Y AXIS TRAVEL: 4"X, 2"Y QUICK RELEASE X-AXIS ADJUSTMENT GLASS STAGEPLATE FOR TRANSMITTED/UNDERSTAGE ILLUMINATION DIGITAL READOUT: SONY MAGNESCALE LU10A DIRECT POSITION INDICATION CAN BE RESET AT ANY LOCATION READABILITY: 0.00002" POWER FOR EVERYTHING: 115V AC REGULAR USA ELECTRICITY VERY HEAVY! 300+LBS. VERY HEAVY! INCLUDED: (1) SCIENTIFIC INSTRUMENT COMPANY FOCUSING STAND (1) UNBRANDED X-Y TRANSLATION STAGE (1) MITUTOYO FINESCOPE FS50 MICROSCOPE HEAD (2) LEICA 10445111 EYEPIECES (1) MITUTOYO M PLAN APO 1X OBJECTIVE LENS (1) MITUTOYO M PLAN APO 2X OBJECTIVE LENS (1) MITUTOYO M PLAN APO 5X OBJECTIVE LENS (1) MITUTOYO M PLAN APO 10X OBJECTIVE LENS (2) SONY MAGNESCALE LU10A-1G5 DIGITAL READOUTS (1) SONY PU10-32-2 POWER SUPPLY FOR MAGNESCALE READOUTS (1) OPTRONICS 60366 DIGITAL CAMERA CONTROLLER (WITH CAMERA) (1) DIAGNOSTIC INSTRUMENTS HRP042-CMT 0.42X FOCUSABLE CAMERA MOUNT (1) INSIGNIA LCD MONITOR (1) LUXO FOI-150-UL FIBER OPTIC ILLUMINATOR (2) SEMIRIGID FIBER OPTICS (1) STANDRIDGE GRANITE 18" X 18" X 3.5" BLACK GRANITE SURFACE PLATE CABLES TO CONNECT EVERYTHING, INCLUDING A POWERSTRIP FOR MAIN POWER

[AZER SCIENTIFIC] ROBOTIC CONDUCTIVE FILTER TIP 50L W/ FILTER TRAY (5760) - MANUFACTURER: AZER SCIENTIFIC MODEL: ES81290-005FR CONDITION: NEW. THESE TIPS AND TRAYS ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME IN THE ORIGINAL AZER SCIENTIFIC BOX THAT CONTAINS 12 SEALED BLISTER PACKS CONTAINING 5 TRAYS EACH AND 96 TIPS/TRAY. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (5760) AZER SCIENTIFIC ROBOTIC CONDUCTIVE FILTER TIP 50L W/ (70) FILTER TRAYS SPECIFICATIONS: MANUFACTURER: AZER SCIENTIFIC MODEL: ES81290-005FR DESCRIPTION: ROBOTIC CONDUCTIVE FILTER TIP W/ FILTER TRAY 50L 96 TIPS / HANGING TIP RACK FORMAT 5 TRAYS / BLISTER PACKETS 14 BLISTER PACKETS / CASE 6720 TOTAL TIPS 1 CASE RACK COLOR BLUE GREEN TIP COLOR BLACK RACK COVER CLEAR NON-STERILE FILTERED WITH AEROSOL-RESISTANT FILTERS TIP SHAPE ROUND MATERIAL POLYPROPYLENE SKU: W44H027 2E-01-05(4) 20LBS - 25IN X 25IN X 18IN

208V/3-PHASE CONTROL CONCEPTS INCORPORATED MODEL UC208D-T3 TERADYNE TESTER PS. USED. COMES IN NON ORIGINAL PACKAGING. ITEM HAS LIGHT SCUFFS AND SCRATCHES FROM NORMAL USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. ITEM WAS REMOVED FROM A WORKING ENVIRONMENT. NO TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CONTROL CONCEPTS INCORPORATED MODEL UC208D-T3 TERADYNE TESTER PS SPECIFICATIONS: MANUFACTURER: CONTROL CONCEPTS INCORPORATED MODEL: UC208D-T3 TERADYNE TESTER PS VOLTAGE: 208 VAC 3 - PHASE INPUT CURRENT: 3.0A MAX. FREQUENCY: 47 - 63 HZ. 16LBS - 16IN X 16IN X 10IN

[MAC VALVES 56C-12-221BA PNEUMATIC VALVE] MANUFACTURER: MAC VALVES MODEL: 56C-12-221BA RANGE: 0-150 PSIG 24 VAC COIL 1" MAIN VALVE FEMALE END 2X 5/8" SIDE PORTS NPT FEMALE END

[EFD NORDSON 1500 XL] ADHESIVE FLUID DISPENSER 0 - 100 PSI. MANUFACTURER: EFD NORDSON MODEL: 1500XL DESCRIPTION: ADHESIVE FLUID DISPENSER POWER: 100/120/220 VAC 50/60 HZ 14/12 VA CYCLE RATE: >600/MINUTE TIME CONTROL: MICROPROCESSOR WITH 0.00005-SECOND REPEATABILITY TIME RANGE: PROGRAMMABLE 0.001 TO 99.9 SECONDS INITIATION: MOMENTARY AIR INPUT: 80 TO 100 PSI (5.5 TO 6.9 BAR) AIR OUTPUT: 0 TO 100 PSI (0 TO 6.9 BAR)

[HP 6624A] HP 6624A SYSTEM DC POWER SUPPLY FOUR, 40 WATT OUTPUTS MAXIMUM OUTPUTS: CHANNELS 1 & 2: 7V 5A / 20V 2A CHANNELS 3 & 4: 20V 2A / 50V 0.8A TWO RANGES FOR EACH OUTPUT (0-7V AND 0-20V, 0-20V AND 0-50V) INDIVIDUALLY PROGRAMMABLE OUTPUTS REMOTE SENSE CAPABLE GPIB COMMUNICATIONS SIDE HANDLES (NO FEET) POWER INPUT REQUIREMENT: 100/120/220/240 50/60HZ CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS POWER SUPPLY IS IN FAIR COSMETIC CONDITION WITH LOTS OF MINOR SCUFFS/SCRATCHES/STAINS FROM PRIOR USE. THE PLASTIC BRACKETS THAT HIDE THE ENDS OF THE HANDLES ARE CRACKED AND BROKEN. THERE IS A TEAR ON THE BACK PANEL BETWEEN THE OUTPUTS FOR CHANNEL 2 AND 3. SOME OF THE SCREWS ON THE OUTPUT TERMINALS ARE MISSING. THE KEYBOARD IS FLOPPING LOOSE INSIDE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SUPPLY IS IN PARTIAL WORKING CONDITION. THE KEYBOARD IS SO LOOSE THAT WE CAN'T GET MOST OF THE BUTTONS TO ACTUATE. WE WERE NOT ABLE TO PUSH ENOUGH BUTTONS TO GET THE OUTPUTS TO TURN ON. THE DISPLAY WORKS. THE FAN DOES NOT TURN. WE ARE NOT ABLE TO TEST THE HP-IB INTERFACE. NO OTHER TESTING WAS DONE. THIS IS BEING SOLD AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 6624A SYSTEM DC POWER SUPPLY

GGB INDUSTRIES 34A-4-22 PICOPROBE REPLACEMENT PROBE TIPS (6) - MANUFACTURER: GGB INDUSTRIES MODEL: 34A-4-22 CONDITION: USED. COMES IN ORIGINAL PACKAGING. THESE TIPS ARE IN GOOD CONDITION COSMETICALLY. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (6) GGB INDUSTRIES PICOPROBE 34A-4-22 REPLACEMENT TIPS SPECIFICATIONS: MANUFACTURER: GGB INDUSTRIES MODEL: 34A-4-22 REPLACEMENT TIPS FOR MODEL 34A-4-22 SKU: S51A006 2L-01-03(1) 2LBS - 6IN X 6IN X 4IN

THERMO G50/PC200 ULTRA-LOW -50/+200C REFRIGERATED BATH/CIRCULATOR 230V MANUFACTURER: THERMO MODEL: G50 CONDITION: USED. THIS CHILLER IS IN GOOD COSMETIC CONDITION WITH ONLY MINOR BLEMISHES FROM PRIOR USE. ONE COVER SCREW ON THE HEAD IS MISSING. THERE ARE A FEW MINOR SCUFFS/SCRATCHES HERE AND THERE, AND SLIGHT RESIDUES FROM PRIOR USE. THE WETTED AREAS LOOK PRETTY CLEAN INSIDE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS CHILLER IS IN GOOD WORKING CONDITION. WE TESTED WITH WATER AND FOUND IT ABLE TO REACH 95O AND 5O EASILY. THE PUMP CIRCULATES AND THE CONTROLS RESPOND TO USER INPUTS AS EXPECTED. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) THERMO 1576509 CIRCULATING BATH SPECIFICATIONS: MANUFACTURER: THERMOFISHER SCIENTIFIC BOM: 1576509 GLACIER-SERIES ULTRA-LOW REFRIGERATED AND HEATED CIRCULATING BATH TEMPERATURE RANGE: -50OC TO +200OC POWER: 200-230V 1PHASE 60HZ (OR 200V 50HZ) 19.2A AMBIENT TEMPERATURE RANGE: 5OC TO 40OC HEAD: HAAKE PC200 HEATED IMMERSION CIRCULATOR DIGITAL DISPLAY ADJUSTABLE HIGH-TEMPERATURE PROTECTION CAN USE BATH AND EXTERNAL SYSTEMS SIMULTANEOUSLY TEMPERATURE RANGE: AMBIENT +13OC TO +200OC HEATER CAPACITY: 2000 WATTS MAXIMUM FLOW RATE: 20 LITERS/MINUTE MAXIMUM PRESSURE: 475 MBAR MAXIMUM SUCTION: 330 MBAR 3 PUMP SPEED STEPS REMOTE SENSOR PORT USB CONNECTIVITY MULTIFUNCTION PORT BASE: HAAKE G50 ULTRA-LOW TEMPERATURE REFRIGERATED BATH TEMPERATURE RANGE: -50OC TO +200OC BATH VOLUME: 12 LITERS OPENING: 24 X 12 CM 12CM DEEP COOLING CAPACITY: 1000 WATTS @ 20OC REFRIGERANT: MO89 CASTERS FOR EASY RELOCATION SKU: Y05D007 3A-02-01(1) 210LBS - 48IN X 40IN X 42IN

[AGILENT 6624A] SYSTEM DC POWER SUPPLY FOUR, 40 WATT OUTPUTS MAXIMUM OUTPUTS: CHANNELS 1 & 2: 7V 5A / 20V 2A CHANNELS 3 & 4: 20V 2A / 50V 0.8A TWO RANGES FOR EACH OUTPUT (0-7V AND 0-20V, 0-20V AND 0-50V) INDIVIDUALLY PROGRAMMABLE OUTPUTS REMOTE SENSE CAPABLE GPIB COMMUNICATIONS SIDE HANDLES (NO FEET) POWER INPUT REQUIREMENT: 100/120/220/240 50/60HZ THIS POWER SUPPLY IS IN FAIR COSMETIC CONDITION WITH LOTS OF MINOR SCUFFS/SCRATCHES/STAINS FROM PRIOR USE. THE KEYBOARD IS LOOSE INTERNALLY. THE LEFT SIDE IS SO LOOSE THAT IT'S HARD TO ACTUATE THE BUTTONS AND YOUR FINGERTIP GOES INTO THE HOLES AS SHOWN. THE BROKEN-OFF BITS CAN BE HEARD RATTLING AROUND IN THE UNIT. A FEW OUTPUT TERMINAL SCREWS ARE MISSING. THE PLASTIC BRACKETS THAT HIDE THE ENDS OF THE HANDLES ARE CRACKED AND BROKEN. THIS SUPPLY IS IN PARTIAL WORKING CONDITION. WE TESTED ALL FOUR CHANNELS AND VERIFIED THEY WILL GIVE MAXIMUM RATED VOLTAGE AT NO LOAD. THE DISPLAY WORKS. THE FAN WORKS. WE ARE NOT ABLE TO TEST THE HP-IB INTERFACE. NO OTHER TESTING WAS DONE. THIS IS BEING SOLD AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN.

[SPIRENT] [SMB-6000B] PERFORMANCE ANALYSIS SYSTEM 12 SLOT CHASSIS WITH (1) LAN-3310A SMARTMETRICS MODULE, (1) SMB-0001A CONTROLLER MODULE, (2) GBICS, AND (6) BLANK FRONT PANEL SLOT COVERS. THIS CHASSIS POWERS ON AND GIVES GREEN LIGHTS ON THE STATUS AND POWER, NO LIGHT ON LINK, AND A RED FAN LIGHT. THE FANS TURN. SKU: P39D007 1D-05-01(1) 32LBS - 25IN X 25IN X 13IN

AGILENT 5060-3386 STANDARD OUTPUT CONNECTORS FOR MPS POWER SUPPLIES (8) MANUFACTURER: AGILENT TECHNOLOGIES HP P/N: 5060-3386 OUTPUT CONNECTOR, STANDARD MATES TO THE MODULAR POWER SUPPLIES IN HEWLETT PACKARD/AGILENT/KEYSIGHT MPS MAINFRAME SCREW TERMINALS TO CONNECT TO YOUR OUTPUT WIRING SELECTABLE LOCAL OR REMOTE SENSE FOR USE UP TO 16 AMPS OUTPUT CURRENT

[USED] DAYTRONIC 3530XI DIGITAL LVDT DISPLAY GAUGE 3530 LOGIC I/O CONTROLLER PLC. INPUT: 90-265VAC; 50-400HZ; 10W MAX. WEIGHT: 2.95 LBS. THIS GAUGE IS IN GREAT CONDITION WITH A FEW MINOR SCUFFS AND SCRATCHES FROM NORMAL USE, BUT NOTHING MAJOR OR ANYTHING THAT WOULD AFFECT FUNCTION. PULLED FROM A WORKING SETUP THAT WAS BEING DECOMMISSIONED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. (1) DAYTRONIC 3530 DIGITAL LVDT DISPLAY GAUGE SPECIFICATIONS: MANUFACTURER: DAYTRONIC MODEL: 3530 PART #: 3530XI DESCRIPTION: LVDT DISPLAY GAUGE POWER CORD: NOT INCLUDED.

[ETS-LINDGREN] HEAD AND TORSO TEST (HATS) ACOUSTIC ENCLOSURE 57" X 56" X 81.5" MANUFACTURER: ETS-LINDGREN MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS ACOUSTIC ENCLOSURE IS IN GOOD COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM REGULAR INDUSTRIAL USE. THE FOAM IS IN USABLE CONDITION BUT JUST BARELY, IT COULD STAND TO BE REPLACED. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE CONFIRMED THE MECHANICAL FUNCTIONALITY OF THE DOOR, HANDLE, LATCHES, AND CASTER WHEELS FUNCTIONED AS DESIGNED. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ETS-LINDGREN HEAD AND TORSO TEST (HATS) ACOUSTIC ENCLOSURE (1) SLIDE-OUT ACCESS TRAY SPECIFICATIONS: MANUFACTURER: ETS-LINDGREN DESCRIPTION: HEAD AND TORSO TEST (HATS) ACOUSTIC ENCLOSURE OVERALL DIMENSIONS: 57" L X 56" W X 78 3/4" H (W/O CASTERS) (4) 3" CASTERS OVERALL HEIGHT W/ CASTERS 81.5" 39" X 30" DOOR OPENING INSIDE: 36" X 36" X 42" 5" THICK ACOUSTIC FOAM 2,500 LBS SLIDE-OUT ACCESS TRAY DIMMS: 44" X 23" X 7" (TABLE TOP IS 33" LONG) SKU: X50S003 6-BILR1(1) 2600LBS - 65IN X 65IN X 90IN

[KEYSIGHT E8792A PIN MATRIX MODULE CARD 32X4 FROM TS-5400 TEST SYSTEM E8792-81000] - MANUFACTURER: KEYSIGHT MODEL: E8792A CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS CARD IS IN GOOD COSMETIC CONDITION WITH SOME SCUFFS/SCRATCHES FROM USE AND DUST FROM STORAGE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS WAS REMOVED FROM A DECOMMISSIONED SYSTEM AND NOT TESTED SEPARATELY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT E8792A MATRIX CARD SPECIFICATIONS: MANUFACTURER: AGILENT TECHNOLOGIES MODEL: E8792A (E8792-81000) PIN MATRIX CARD 32X4 MATRIX HAS INSTRUMENT MATRIX IN ADDITION TO MEASUREMENT MATRIX ORIGINALLY INSTALLED IN TS-5400 FUNCTIONAL TEST SYSTEM

[UNBRANDED] 36" X 31" STAINLESS STEEL M6-1.0 TABLETOP PNEUMATIC VIBRATION ISOLATION TABLE - AS/IS FOR PARTS OR REPAIR. ONE SIDE DOES NOT RAISE. MINOR SCUFFS, SCRATCHES, AND LIGHT RUST. INCLUDES (1) UNBRANDED 36" STAINLESS STEEL PNEUMATIC VIBRATION ISOLATION TABLETOP AS/IS. SPECIFICATIONS: STAINLESS STEEL PNEUMATIC VIBRATION ISOLATION TABLETOP 36" X 31" X 3 1/3", 34 1/2" X 29" TABLE DIMENSIONS, M6-1.0 THREADS. SKU: W51O005 5C-16-01(1) 103LBS - 40IN X 36IN X 10IN

[JEWETT BBR55-1B] BLOOD BANK LABORATORY REFRIGERATOR 55 CUBIC FEET 59" WIDE, 39" DEEP INCLUDING HANDLES AND DRAIN PAN, 83" HIGH DOUBLE DOORS, INSULATED GLASS WINDOWS INTERNAL FAN RUNS WHEN DOORS ARE CLOSED TO KEEP TEMPERATURE UNIFORM INSIDE TOP-MOUNTED REFRIGERATION CASTERS FOR EASY RELOCATION DIGITAL CONTROLLER IS NOT FUNCTIONAL CIRCULAR CHART RECORDER IS NOT FUNCTIONAL HEATCRAFT C30AG REFRIGERATION UNIT INSIDE IS MARKED FOR USE WITH R12, 22, 502, 404A POWER: 115V 60HZ 10.5A REFRIGERANT: R134A. VARIOUS ISSUES, KINDA WORKS - PARTS - MANUFACTURER: JEWETT MODEL: BBR55-1B CONDITION: FOR PARTS OR NOT WORKING. THIS REFRIGERATOR IS IN FAIR COSMETIC CONDITION WITH LOTS OF MINOR BLEMISHES (SCUFFS/SCRATCHES/STAINS) FROM PRIOR USE. THERE ARE GREEN RESIDUES ON THE BOTTOM INSIDE. THERE ARE SPLASH MARKS UNDER THE REFRIGERATION UNIT INSIDE. THE DRAIN EVAPORATOR AREA IS DENTED UP AND HAS LOTS OF RESIDUES. THERE ARE SOME HEAVY DENTS/SCRATCHES ON THE BACK CORNERS. THE GUTS ARE MISSING FROM THE CHART RECORDER SO IT DOESN'T HAVE ANYTHING TO SPIN THE PAPER. WE DO NOT HAVE A KEY FOR THE DOOR LATCH LOCKS (IT IS UNLOCKED). THERE ARE NO SHELF HANGERS AND THE ONE RACK SITTING ON THE FLOOR INSIDE IS NOT THE PROPER SIZE FOR THIS UNIT. NOTES: THIS REFRIGERATOR IS IN PARTIAL WORKING CONDITION. THE REFRIGERATION WORKS BUT IT ONLY COOLED DOWN TO ABOUT 45OF EVEN THOUGH WE LEFT IT RUNNING FOR ABOUT SIX HOURS. THE FAN INSIDE RATTLES. THE INTERIOR LAMP DOES NOT LIGHT UP. THE CONTROL PANEL NEVER LIGHTS UP OR RESPONDS TO BUTTON PRESSES. A LIGHT COMES ON THE CHART RECORDER AND BLINKS GREEN. NOTHING ELSE HAPPENS. WE ARE NOT SURE WHAT MAY BE WRONG WITH THIS UNIT BUT IT NEEDS AT LEAST A REFRIGERATION SERVICE TO GET COLD AGAIN PLUS WHATEVER REPAIRS ARE NEEDED FOR THE CONTROLLER. NO OTHER TESTING WAS DONE. THIS IS BEING SOLD AS/IS FOR PARTS OR REPAIR. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) JEWETT BBR55-1B REFRIGERATOR

HEWLETT PACKARD 66001A MPS KEYBOARD FOR RACK MOUNT MODULAR POWER SUPPLY KEYBOARD FOR HP/AGILENT/KEYSIGHT MPS MODULAR POWER MAINFRAME ENABLES DIRECT, LOCAL PROGRAMMING & CONTROL OF THE MPS ALPHABETICAL COMMAND MENU FOR POWER MODULE SCPI COMMANDS WITH ADAPTER FOR MOUNTING TO STANDARD 19" RACK MOUNT S/N: Y23D011

[HEWLETT PACKARD E3630A] TRIPLE OUTPUT DC POWER SUPPLY +/-20V .5A TRACKING 6V 2.5A - MANUFACTURER: HEWLETT PACKARD HP MODEL: E3630A CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN FAIR COSMETIC CONDITION, WITH SCUFFS/SCRATCHES AND RESIDUES FROM PRIOR USE, INCLUDING ADHESIVE LABEL RESIDUES. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SUPPLY IS IN GOOD WORKING CONDITION. WE LOADED EACH CHANNEL TO FULL RATED CURRENT AT FULL VOLTAGE OUTPUT WITH NO DIFFICULTIES. THE TRACKING/ADJUSTABLE VOLTAGE KNOBS ALL WORK. THE DISPLAYS ARE BRIGHT AND CLEAR. PLEASE NOTE: IF THE 20V BUTTON IS PRESSED TOO HARD, THE SWITCH WILL GET STUCK, AND THEN HAS TO BE PULLED OUT WITH BABY PLIERS OR SOMETHING, IT'S KIND OF ANNOYING BUT YOU HAVE TO PUSH REALLY HARD TO GET IT TO DO THAT. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP E3630A POWER SUPPLY SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: E3630A TRIPLE OUTPUT DC POWER SUPPLY VARIABLE, REGULATED DC OUTPUT OUTPUTS: 0 TO +20VDC 0-0.5A 0 TO -20VDC 0-0.5A 0 TO +6VDC 0-2.5A INPUT: 115V 47-63HZ 3/4 TURN VOLTAGE ADJUSTMENT PER CHANNEL -20V SUPPLY TRACKS +20V VOLTAGE SETTING TRACKING RATIO IS VARIABLE (100% OF +20V SETTING TO NO OUTPUT) MAXIMUM OUTPUT POWER: 35W LED OUTPUT METERS FOR CURRENT AND VOLTAGE REGULATED OUTPUT WITH LOW RIPPLE AND NOISE SMOOTH TURN-ON/TURN-OFF WITHOUT POWER SPIKES OUTPUTS PROTECTED FROM SHORT-CIRCUIT DAMAGE COMMON MODE CURRENT <1 MICROAMP SKU: Y39D019 1C-02-03(1) 12LBS - 16IN X 12IN X 8IN

[HEWLETT PACKARD 3325A] SYNTHESIZER/FUNCTION GENERATOR 20MHZ AS-IS UNSTEADY LOW HZ - MANUFACTURER: HEWLETT PACKARD HP MODEL: 3325A CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS GENERATOR IS IN FAIR COSMETIC CONDITION, WITH LOTS OF SCUFFS/SCRATCHES/STAINS FROM PRIOR USE, AND SOME ADHESIVE LABEL RESIDUES. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS GENERATOR IS IN PARTIAL WORKING CONDITION. THE MAIN PROBLEM WE FOUND IS THAT THE SIGNAL AT LOW FREQUENCIES IS SO UNSTABLE OUR FREQUENCY COUNTER CAN'T DECIDE WHAT TO CALL IT, SO 100HZ COULD BE READING ANYWHERE FROM 200 TO 600 AT ANY GIVEN INSTANT. IT SEEMS TO STEADY AT HIGHER FREQUENCIES. ALSO, THERE IS NO SIGNAL PRESENT ON THE REAR OUTPUT, AND THE POWER SWITCH STICKS IN THE "ON" POSITION, AND MUST BE TUGGED WITH FINGERTIPS TO SWITCH OFF. WE WERE ABLE TO VERIFY OUTPUT FROM THE FRONT OUTPUT TO 20.999 MHZ. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 3325A SYNTHESIZER/FUNCTION GENERATOR SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL 3325A SYNTHESIZER/SIGNAL GENERATOR FREQUENCY RANGE: 1HZ TO 20MHZ SINE (TO 20.999999MHZ) SQUARE (TO 10.999MHZ) TRIANGLE, POSITIVE AND NEGATIVE SLOPE RAMPS (TO 10KHZ) FRONT AND REAR SWITCHABLE OUTPUT 1MV TO 10VPP OUTPUT LEVEL HP-IB COMMUNICATIONS POWER: 120V 48-66HZ 100VA SKU: Y37D012 1D-09-03(1) 23LBS - 25IN X 25IN X 12IN

[NIKON] MOTORIZED QUINTUPLE 5-PLACE MICROSCOPE OBJECTIVE LENS TURRET NOSEPIECE. MOTORIZED REVOLVING NOSEPIECE TURRET FOR MICROSCOPE OBJECTIVE LENSES REMOVED FROM AN OPTIPHOT-66 SCOPE QUINTUPLE NOSEPIECE, (5) OBJECTIVE LENS POSITIONS MOTORIZED OBJECTIVE CHANGING FOR BRIGHTFIELD OR DARKFIELD ILLUMINATION MOUNTING DOVETAIL: 44MM DIAMETER FOR OBJECTIVES WITH 26MM THREADS MOTOR: MINIMOTOR 22/2K REQUIRES A DRIVER, NOT INCLUDED! FAIR COSMETIC CONDITION WITH ONLY LIGHT SCUFFS/MARKS FROM PRIOR USE. GOOD WORKING CONDITION.

[SYSCON RKC] REX-C100 DIGITAL TEMPERATURE CONTROL. MANUFACTURER: SYSCON - RKC MODEL: REX-C100 PART NO: C100F801-M*AN DESCRIPTION: DIGITAL TEMPERATURE CONTROL VOLTAGE INPUT: 100-240VAC 50/60HZ 17 VA MAX RANGE: 0.0 - 100.0% CONTROL ACTION: PID ACTION (REVERSE ACTION) CONTROL OUTPUT: RELAY CONTACT FIRST ALARM: DEVIATION HIGH ALARM SECOND ALARM: NO SECOND ALARM. SKU: Y11U012 4C-03-02(2) 2LBS - 6IN X 6IN X 4IN

[UNBRANDED] HLB MANUAL TEST STAND COMPRESSION TENSION DIGITAL READOUT. MANUFACTURER: UNBRANDED MODEL: HLB. THIS ITEM IS IN FAIR COSMETIC CONDITION WITH ONLY LIGHT SCUFFS/SCRATCHES FROM PRIOR USE. THE MOVING PARTS HAVE LIGHT GREASE FILMS APPLIED. THERE ARE A FEW SPOTS WITH ADHESIVE RESIDUE FROM OLD TAPE. NOTES: THIS STAND IS IN GOOD WORKING CONDITION. MOTION IS SMOOTH FROM TOP TO BOTTOM OF TRAVEL AND BACK AGAIN. THE SCREW IS A LITTLE LOOSELY MOUNTED SO THERE IS SOME PLAY AND BACKLASH, BUT THE MOTION GUIDES ARE TIGHT AND SOLID, SO MOTION IS STRAIGHT. THERE IS LITTLE ROOM ON TOP AND BOTTOM, SO TOTAL TRAVEL IS A LITTLE OVER 16 CM. THE DIGITAL READOUT WORKS; WE'RE NOT A CALIBRATION LAB BUT IT MATCHES A STEEL MACHINIST SCALE WELL. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HLB MANUAL TEST STAND SPECIFICATIONS: MANUAL TEST STAND MODEL: HLB DIGITAL HEIGHT INDICATOR TRAVEL: 6", 150MM APPROXIMATELY 18" OVERALL HEIGHT SWITCHABLE INCHES/MILLIMETER DISPLAY BOTTOM OF MOUNTING BLOCK IS ABOUT 3-5/8" ABOVE BASE BRONZE BUSHINGS ON LINEAR MOTION GUIDES BRONZE BOTTOM AND MIDDLE BUSHINGS ON SCREW BALL BEARINGS ON TOP OF SCREW BY HANDLE SKU: X30D007 2O-02-03(1) 18LBS - 22IN X 15IN X 9IN

[USED] AGILENT TECHNOLOGIES G1999-80401 CI GAS VALVE/FLOW CONTROL MODULE - MANUFACTURER: AGILENT TECHNOLOGIES MODEL: G1999-80401 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS PART WAS REMOVED FROM A DECOMMISSIONED SYSTEM AND COSMETIC CONDITION IS VERY GOOD. THERE ARE A FEW SMALL COSMETIC SCUFFS ON THE OUTSIDE (SEE PHOTOS), HOWEVER THE THREADINGS/FITTINGS ARE CLEAN INSIDE AND OUT. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS PART HAS NOT BEEN TESTED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT G1999-80401 GAS VALVE (GAS A AND GAS B) SPECIFICATIONS: MANUFACTURER: AGILENT TECHNOLOGIES PART NUMBER: G1999-80401 100PSIG / 24VDC GAS CHROMATOGRAPHY/MASS SPECTROMETRY CI FLOW CONTROL MODULE REPLACEMENT PART FOR AGILENT SERIES 5973, 5975, 5977 AND 7000 MASS SPECTROMETERS SKU: Y41V002 1D-20-01(1) 2LBS - 6IN X 4IN X 4IN

NEW UNIVERSAL INSTRUMENTS 45466931 FLEX HEAD 234F GSM NOZZLE SMT PICK & PLACE MANUFACTURER: UNIVERSAL INSTRUMENTS (UIC) MODEL: 234F PART #: 45466931 DESCRIPTION: GSM NOZZLE TYPE: FLEX HEAD FOR USE WITH: SMT PICK & PLACE MACHINE WEIGHT: 0.10 LBS. SKU: P33P001 1B-13-02(11) 0LBS - 6IN X 6IN X 4IN

(LOT OF 8) NEW ASSEMBLEON/PHILLIPS 5322 479 60114 LASER ALIGN MELF NOZZLES FCM2 - MANUFACTURER: ASSEMBLEON/PHILLIPS MODEL: 5322 479 60114 DESCRIPTION: PLACEMENT PHI UNIT LASER ALIGN NOZZLES TYPE: MELF NOZZLE 1.5 SPECIFICATIONS: MANUFACTURER: ASSEMBLEON/PHILLIPS MODEL: 5322 479 60114 SKU: P30P014 1E-10-02(1)

TEKTRONIX P67SA01SD SINGLE DIFFERENTIAL INPUT SOLDER DOWN PROBE PCIE3 NO TIPS - MANUFACTURER: TEKTRONIX MODEL: P67SA01SD SOLDER-DOWN PROBE SINGLE DIFFERENTIAL INPUT PCI EXPRESS REQUIRES SOLDER-DOWN TIPS (NOT INCLUDED) REQUIRES APPROPRIATE INTERPOSER CARD (NOT INCLUDED) 2LBS - 8IN X 8IN X 4IN

[BEE DEBEE 2000] HIGH PRESSURE PILOT PLANT HOMOGENIZER 30,000 PSI 1L/MIN HYDRAULIC - MANUFACTURER: BEE MODEL: DEBEE 2000 CONDITION: FOR PARTS OR NOT WORKING. THIS ITEM IS IN FAIR COSMETIC CONDITION, AND VISIBLY INCOMPLETE. THERE IS A MISSING SAFETY COVER ON THE WORKING AREA, AND THE INTERLOCK HAS BEEN BYPASSED WITH A LITTLE TAPED-ON FIXTURE. THERE ARE SEVERAL MISSING PARTS (WE ARE NOT SURE WHAT, EXACTLY) IN THE WORKING AREA. THERE ARE LOTS OF SCUFFS/SCRATCHES ALL OVER THE PLACE, AND SOME LIGHT OIL RESIDUES INSIDE. SOMEONE ADDED A LARGE HEAT EXCHANGER, AND MOUNTED IT UNDER THE TOP INSIDE, WITH HOSE BARBS EXTENDING TO THE RIGHT SIDE OF THE MACHINE. ALL AROUND THE TOP OF THE WORKING AREA ARE A SERIES OF HOLES FOR MOUNTING THE SAFETY COVER. THERE IS A MISSING SCREW FOR THE TOP COVER. THERE ARE SEVERAL HOLES ALL OVER, WITH UNKNOWN FUNCTIONS. THE MAIN POWER INPUT SWITCH IS MISSING ITS OPERATOR BUT CAN STILL BE TURNED. PLEASE NOTE: THERE IS A CHART ON THE CONTROL PANEL GIVING HYDRAULIC-TO-PROCESS PRESSURE READINGS, WHICH STOPS AT 1400/30000 PSI. THE HYDRAULIC UNIT CAN GIVE UP TO 2400PSI, SO WE'RE NOT SURE WHAT EXACT MAXIMUM PROCESS PRESSURE THIS UNIT CAN GIVE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS HOMOGENIZER IS IN PARTIAL WORKING CONDITION. AT POWER-ON, IT GIVES AN ALARM (SHOWN) ABOUT A PRESSURE SENSOR. THE ERROR CAN BE IGNORED, AND THE MACHINE CAN RUN A CYCLE BY PRESSING THE APPROPRIATE BUTTONS. THE BACK-PRESSURE INDICATION ALWAYS STAYS AT THE SHOWN 33600 PSI. TEMPERATURE READINGS SHOOT UP AND DOWN DURING A CYCLE. WITH THE COVER REMOVED, A BYPASS FIXTURE (TAPED IN PLACE) ALLOWS A CYCLE TO RUN. THE HYDRAULIC POWER UNIT WORKS WELL, AND BUILDS PRESSURE TO JUST OVER 2400PSI. THE PISTONS GO THROUGH THEIR EXTEND/RETRACT ACTION, AS CAN BE SEEN THROUGH HOLES IN THE PRESS UNITS. THE POWER MAIN SWITCH CAN BE OPERATED WITH A PLIERS, AND STILL WORKS NORMALLY. THE EMERGENCY STOP SWITCH WORKS. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) DEBEE 2000 HOMOGENIZER SPECIFICATIONS: MANUFACTURER: B.E.E. INTERNATIONAL MODEL: DEBEE 2000 WITH 10 HORSEPOWER HYDRAULIC POWER UNIT MODULAR HOMOGENIZER CELLS DUAL FEED AND DUAL JET CAN BE USED WITH ABRASIVE AND VISCOUS MATERIALS EASY TO CLEAN, CLEAN IN PLACE FULL USER CONTROL OVER PRESSURE SUITABLE FOR CONTINUOUS OPERATION IN SMALL-SCALE PRODUCTION PLC CONTROL FOR MONITORING AND SIMPLE PUSH-BUTTON OPERATION HEAT EXCHANGER FOR PRODUCT COOLING STAINLESS STEEL ENCLOSURE CONTINUOUS FLOW UP TO 1 LITER/MINUTE ADJUSTABLE OPERATING PRESSURE 2000 TO 30,000 PSI ADJUSTABLE BACK PRESSURE POWER SUPPLY REQUIREMENT: 3PHASE 230V 60HZ WEIGHS ABOUT 900 LBS. NOT COMPLETE! SOLD AS-IS! SKU: Y14D014 5F-21-01(1) 1000LBS - 58IN X 40IN X 60IN

[TEKTRONIX TLA7AA4] LOGIC ANALYZER MODULE FIELD UPGRADED WITH OPTION 75 TO TLA7FAA4 136 CHANNELS TIMING: 8 GHZ STATE SPEED: 450 MHZ MEMORY DEPTH: 32M FOR USE WITH TLA700 SERIES - MANUFACTURER: TEKTRONIX MODEL: TLA7AA4 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS MODULE IS IN FAIR COSMETIC CONDITION WITH MINOR SCUFFS/SCRATCHES, MARKER WRITING AND ADHESIVE LABEL RESIDUES FROM PRIOR USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS CAME TO US WITH A LARGE ASSORTMENT OF "BAD" TEST EQUIPMENT. WE ASSUME IT IS FAULTY, BUT HAVE NO WAY TO TEST IT. THIS SALE WILL BE AS-IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) TEK TLA7AA4 2S LA MODULE SPECIFICATIONS: MANUFACTURER: TEKTRONIX MODEL: TLA7AA4 LOGIC ANALYZER MODULE FIELD UPGRADED WITH OPTION 75 TO TLA7FAA4 136 CHANNELS TIMING: 8 GHZ STATE SPEED: 450 MHZ MEMORY DEPTH: 32M FOR USE WITH TLA700 SERIES SKU: Y09D018 2O-01-03(2) 8LBS - 18IN X 12IN X 7IN

[ENERGY CONCEPTS 60200 DIGITAL PHOTOMETER] [ENERGY CONCEPTS 60300 POWER MEASUREMENT MODULE] MANUFACTURER: ENERGY CONCEPTS MODEL: 60200 DIGITAL PHOTOMETER POWER: 120/240VAC FREQUENCY: 50/60HZ 6 VA MODEL: 60300 POWER MEASUREMENT MODULE VOLTAGE: 120VAC CURRENT: 5A MAX.

[UNBRANDED] STAINLESS STEEL LAB FREEZER RACK 22"X11"X5.30" W/ (3) ADJUSTABLE SHELVES - MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE RACK IS IN GOOD, USED CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE RACK WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. THE UNIT IS BEING SOLD AS/IS FOR PARTS OR REPAIR DUE TO THE UNIT MISSING (2) SHELVES, AS SEEN IN THE PHOTOS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) STAINLESS STEEL LAB FREEZER RACK 22"X11"X5.30" W/ (3) ADJUSTABLE SHELVES SPECIFICATIONS: MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY LABORATORY FREEZER RACK SHELVING UNIT ADJUSTABLE, REMOVABLE SHELVES HORIZONTAL ORIENTATION TOTAL LENGTH: 22" TOTAL HEIGHT: 11" DEPTH/WIDTH: 5.30" CONSTRUCTION: STAINLESS STEEL 20-SPACE CONFIGURATION, INCLUDES 2 ADDITIONAL SHELVES SINGLE HANDLE

[20] LABFORCE 1162D95 DISPOSABLE VACUUM BOTTLE TOP FILTER 500ML NON-STERILE SPECIFICATIONS: MANUFACTURER: LABFORCE MODEL: 1162D95 DESCRIPTION: DISPOSABLE VACUUM BOTTLE TOP FILTER NON-STERILE 500ML 0.2UM STERILIZING PTFE MEMBRANE GL45 THREAD POLYPROPYLENE HOUSING

HAKKO T7/T15-R23 SOLDERING TIP FOR FM-202/FP-102 SPECIFICATIONS: PART #: T7/T15-R23 TIP SHAPE: 2.3R FOR IRONS: HAKKO FM-203-HANDPIECE : HAKKO FM-2027(70W) HAKKO FM-204-HANDPIECE : HAKKO FM-2027(70W) HAKKO FX-950-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-951-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-952-HANDPIECE : HAKKO FM-2028(70W) HAKKO FM-202-HANDPIECE : HAKKO FM-2021(70W) OR HANDPIECE : HAKKO FM-2027(70W) NOTE: THE T15 TIPS HAVE REPLACED THE T7 TIPS. THE ONLY DIFFERENCE IS HAKKO HAS PHASED OUT THE BARCODE FROM THE TIPS. SEE THE HAKKO PRODUCT BULLETIN. SKU: EBK39E012 1D-20-01(5)

[SOLARTRON METROLOGY 920338] AC MINIATURE S-SERIES DISPLACEMENT TRANSDUCER. MANUFACTURER: SOLARTRON METROLOGY. MODEL: 920338. INPUT VOLTAGE: 10-30 VDC. BANDWIDTH HZ: 500 (-3DB). OUTPUT RIPPLE: 0.02 (% FSO). DIMENSIONS: 15.16MM LONG, 9.50MM DIAMETER. READING RATE: UP TO 3906 READINGS PER SECOND. OUTPUT: SOLARTRON ORBIT PROTOCOL. BODY MATERIAL: 316 SERIES STAINLESS STEEL. CORE: NICKEL/IRON. CONDITION: USED. COMES IN ORIGINAL PACKAGING. THE TRANSDUCER IS IN GOOD, LIGHTLY USED CONDITION WITH MINOR SCUFFS FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE UNIT WAS REMOVED FROM A DECOMMISSIONED MACHINE. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) NEW SOLARTRON METROLOGY 920338 AC MINIATURE S-SERIES DISPLACEMENT TRANSDUCER.

THORLABS LPH250 RIGID STAND POST HOLDER, L = 250 MM W/ 1-1/2" DIAMETER POST. MANUFACTURER: THORLABS, MODEL: LPH250. THIS POST HOLDER IS IN GREAT CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). THE POST MOVES UP AND DOWN THE HOLDER AS INTENDED. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) THORLABS LPH250 - RIGID STAND POST HOLDER, L = 250 MM W/ 1-1/2" DIAMETER POST. POST HOLDER COMPATIBLE POSTS: 1.5 ". CONSTRUCTION: STAINLESS STEEL. LENGTH: 250 MM. SKU: Y16S008. 1B-03-02(2). 11LBS - 16IN X 8IN X 8IN

PARKER HI-PURITY CLEANING MEM-882VFVF-PE STAINLESS STEEL 1/2" FEMALE ELBOW - MANUFACTURER: PARKER MODEL: MEM-882VFVF-PE HI-PURITY CLEANING 316V STAINLESS STEEL 1/2" FEMALE ELBOW VACUSEAL-8 SPECIFICATIONS: MANUFACTURER: PARKER MODEL: MEM-882VFVF-PE

NEW HAKKO T7/T15-JD16 SOLDERING TIP FOR FM-202/FP-102 PART #: T7/T15-JD16 TIP SHAPE: 1.6JD SIZE: 1.6 FOR IRONS: HAKKO FM-203-HANDPIECE : HAKKO FM-2027(70W) HAKKO FM-204-HANDPIECE : HAKKO FM-2027(70W) HAKKO FX-950-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-951-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-952-HANDPIECE : HAKKO FM-2028(70W) HAKKO FM-202-HANDPIECE : HAKKO FM-2021(70W) OR HANDPIECE : HAKKO FM-2027(70W) NOTE: THE T15 TIPS HAVE REPLACED THE T7 TIPS. THE ONLY DIFFERENCE IS HAKKO HAS PHASED OUT THE BARCODE FROM THE TIPS. SEE THE HAKKO PRODUCT BULLETIN. SKU: EBK39E003

[NEW] WEARWELL 095.18X36BL 18"X36" BLUE CLEANROOM MATS 30 SHEETS PER MAT (4) - MANUFACTURER: WEARWELL MODEL: 095.18X36BL CONDITION: NEW. COMES IN SEALED ORIGINAL PACKAGING. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SPECIFICATIONS: MANUFACTURER: WEARWELL MODEL: 095.18X36BL CLEAN ROOM MAT LENGTH: 36" WIDTH: 18" 30 SHEETS OF TOUGH FILM PER MAT EFFECTIVELY TRAPS IMPURITIES FROM SHOES FOR DIRT AND DUST CONTROL COLOR: BLUE COMPOSITION: POLYETHYLENE RECYCLED CONTENT: <10% FOR USE ON LOW-PILE CARPET, TILE, OR CONCRETE SURFACES SUITABLE ENVIRONMENT: DRY SKU: V27B002

[NETECH UM2000] LCD DISPLAY DIGITAL VACUUM PRESSURE TEMPERATURE MANOMETER S/N: X48G014. MANUFACTURER: NETECH MODEL: UM2000 DESCRIPTION: VACUUM PRESSURE TEMPERATURE MANOMETER PRESSURE / VACUUM RANGE: -10 TO 100 PSI ACCURACY: PRESSURE: 0.25% OF FS +/- 1 DIGIT TEMPERATURE: +/- 2% RESOLUTION: YSI: 0.1 DEGREES C K/J: 1 DEGREES C DISPLAY: 2 LINE 16 CHARACTER LCD DISPLAY MAXIMUM PRESSURE: TWICE THE MAXIMUM RATED PRESSURE TEMPERATURE CONNECTION: YSI 700 - 1/4 INCH PHONE JACK RTD K/J TYPE MINI CONNECTOR. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS ITEM IS IN GOOD COSMETIC CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM REGULAR USE BUT NOTHING THAT WOULD AFFECT FUNCTIONALITY. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE POWERED THIS UNIT ON WITH ONE OF OUR IN-HOUSE BATTERIES (NOT INCLUDED) AND VERIFIED ALL ITS FUNCTIONS OPERATE AS INTENDED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) NETECH UNIMANO UM2000 LCD DISPLAY DIGITAL VACUUM PRESSURE TEMPERATURE MANOMETER.

(1) AGILENT E7019A NITROGEN PURGE BOX MANUFACTURER: AGILENT MODEL: E7019A DESCRIPTION: NITROGEN PURGE BOX SKU: W12H018 1D-11-02(1) 0LBS - 8IN X 8IN X 7IN

MEC-O-MATIC 84605096 DOLPHIN SERIES PERISTALTIC METERING PUMP KOPKIT # KUDXX-LSAU 115VAC 0.42A 60HZ 1-PHASE NOMINAL OUTPUT: 13 GPD 2.05 LPH MAX PRESSURE: 25 PSI 1.72 BAR SKU: Y04H011 1B-13-04(1) THE SCREW MOUNTING RECEPTACLES WITHIN THE ENCLOSURE ARE BROKEN LEAVING THE BACK PLATE UNABLE TO CONNECT OR MOUNT TO THE PUMP HOUSING. SOLD AS/IS FOR PARTS.

[SPINDLER & HOYER] SPINDLER & HOYER 25X VARIABLE OPTICAL LENS, 450-700 NM W/ 03 8648 LENS - MANUFACTURER: SPINDLER & HOYER MODEL: 25X CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS OPTICAL LENS IS IN GREAT CONDITION WITH MINOR SCUFFS AND SCRATCHES ON THE BODY, BUT NOTHING ON THE LENS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS OPTICAL LENS WAS REMOVED FROM A WORKING SYSTEM AND HAS NOT BEEN TESTED SINCE ITS REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) SPINDLER & HOYER 25X VARIABLE OPTICAL LENS, 450-700 NM (1) 03 8648 LENS SPECIFICATIONS: MANUFACTURER: SPINDLER & HOYER MODEL: 25X DESCRIPTION: OPTICAL LENS VARIABLE 450-700 NM SKU: X29S020 1D-13-02(1) 3LBS - 12IN X 8IN X 4IN

[APPLIED BIOSYSTEMS GENEAMP PCR SYSTEM 9700] PCR SYSTEM 96-WELL THERMAL CYCLER CELLS TEMPERATURE ACCURACY: +/- 0.25 C DEGREES TEMPERATURE RANGE: 4.0 DEGREES TO 99.99 DEGREES C 12" X 10" X 16" MAX BLOCK RAMP RATE: 2.0 DEGREES C / SEC MAX SAMPLE RAMP RATE: 1.7 DEGREES C / SEC PCR VOLUME RANGE: 10-100 UL. THIS PCR SYSTEM IS IN GOOD COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM NORMAL HEAVY LABORATORY USE. COMES IN NON-ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. WE POWERED ON THIS PCR SYSTEM AND OBSERVED THE LED DISPLAY ILLUMINATE BRIGHTLY. WE WERE ABLE TO NAVIGATE THROUGH THE MENU DISPLAY EASILY AND IT WAS RESPONSIVE TO THE CONTROLS. THERE WAS A NOTE ATTACHED TO THE UNIT THAT READ, "BAD TOP HAT - PUT ON RIGHT". THE TOP HAT OPENS AND CLOSES BUT DOES REQUIRE A MANUAL SLIDE-UP TO PROPERLY CLOSE. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. MANUFACTURER: APPLIED BIOSYSTEMS MODEL: GENEAMP PCR SYSTEM 9700 PART # N8050200 DESCRIPTION: THERMAL CYCLER PCR SYSTEM 96-WELL THERMAL CYCLER SKU: W40H015 2F-03-04(1) 32LBS - 22IN X 15IN X 15IN

[LIEBERT SITEMASTER 200] ELECTRICAL DISTURBANCE METER FOR PARTS - MANUFACTURER: LIEBERT MODEL: 200 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS UNIT IS IN FAIR COSMETIC CONDITION WITH LOTS OF SMALL SCRATCHES AND SCUFFS, AS WELL AS A MISSING PRINTER SIDE COVER. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS UNIT IS NOT WORKING WELL! THE DISPLAY IS SO LOW-CONTRAST AS TO BE USELESS, AND THE PRINTER PRINTS, BUT ONLY VERY LIGHTLY. NO TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) LIEBERT 200 LINE ANALYZER SPECIFICATIONS: MANUFACTURER: LIEBERT MODEL: SITEMASTER 200 ELECTRICAL LINE ANALYZER FOR PARTS! SEE NOTES SKU: N25D017 1D-16-01(1) 36LBS - 25IN X 19IN X 16IN

[TENNEY LUNAIRE BTS] ENVIRONMENTAL TEST CHAMBER R404A REFRIGERANT 30OZ. 230VAC 1PH 60HZ 20A 25A FUSE, WITH WATLOW F4 TEMPERATURE CONTROLLER. TESTED TO -35 DEGREES C AND 198.7 DEGREES C. 500LBS - 70IN X 41IN X 52IN

[MICROMANIPULATOR 450] MICROMANIPULATOR 450 XYZ PROBE POSITIONER MANIPULATOR - PARTS - MANUFACTURER: MICROMANIPULATOR MODEL: 450 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. COSMETICALLY, THIS ITEM IS IN GOOD CONDITION. IT HAS SOME SCUFFS, SCRATCHES, TAPE RESIDUE, AND DUST FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS UNIT DOES NOT FUNCTION PROPERLY. TURNING THE CONTROLS DOES NOT MOVE THE SHAFT PROPERLY DUE TO THE KNOBS NEEDING ADJUSTMENT. WE DID NOT HAVE A VACUUM TO TEST THE BASE. THEREFORE THIS UNIT IS BEING SOLD AS/IS FOR PARTS REPAIR. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) MICROMANIPULATOR 450 POSITIONER / MANIPULATOR SPECIFICATIONS: MANUFACTURER: THE MICROMANIPULATOR COMPANY MODEL: 450 TYPE: X-Y-Z PROBE POSITIONER / MANIPULATOR BASE: VACUUM BASE MOUNTS: LEFT-HANDED MAXIMUM TRAVEL: 0.25" (6.4MM) PER AXIS (X-Y-Z) SKU: S15A005 1E-15-03(2) 2LBS - 8IN X 8IN X 4IN

[USED] BAXTER / LAB-LINE INSTRUMENTS J1450-4 INCUBATOR OD 30.5X22X31.5" ID 12.5 X 18 X 21.5" 120V 50/60HZ 400W 3.33A. THE INCUBATOR IS IN GOOD COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM REGULAR INDUSTRIAL USE. IT COMES IN NON-ORIGINAL PACKAGING. THE UNIT WAS PLUGGED IN AND OBSERVED TO REACH AND MAINTAIN ~140 DEGREES F. THE DOORS ARE A BIT JANKY AND DO NOT CLOSE VERY WELL OR TIGHTLY, THEY SEEM TO SIT CLOSED BUT DO NOT LOCK TIGHT OR HOLD TIGHT TO THE OVEN. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SKU: X06H036 5F-13-02(1) 210LBS - 48IN X 40IN X 40IN

[CALIFORNIA INSTRUMENTS 1251P] AC VOLTAGE SOURCE 0-270VAC MOSTLY WORKING - PARTS - MANUFACTURER: CALIFORNIA INSTRUMENTS MODEL: 1251P CONDITION: FOR PARTS OR NOT WORKING. THIS SOURCE IS IN FAIR COSMETIC CONDITION WITH LOTS OF SCUFFS/STAINS FROM PRIOR USE, AND LIGHT SCRATCHES HERE AND THERE ALL OVER. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SOURCE IS IN AT-LEAST-PARTIAL WORKING CONDITION. WE FOUND IT IS ABLE TO GIVE FULL RATED VOLTAGE EVEN AT LOW INPUT VOLTAGE (275 OUT FROM 120 IN). THE HIGH AND LOW VOLTAGE OUTPUTS GIVE VARIABLE FREQUENCY AND VOLTAGE, BUT THE WAVEFORMS ARE VERY NOISY AT LOW VOLTAGE - ABOUT A VOLT AND A HALF OF NOISE RIDES ON A SINE WAVE. AT HIGH VOLTAGES THIS BLENDS IN, BUT AT LOW VOLTAGE OUTPUTS THE NOISE DOMINATES THE SIGNAL ON OUR OSCILLOSCOPE. AT LOW VOLTAGE (UNDER A COUPLE OF VOLTS), THE VOLTAGE NOISE IS SO PROMINENT THAT IT THROWS OFF THE FREQUENCY READING ON OUR MULTIMETER, CAUSING FREQUENCY READINGS TO JUMP ALL OVER THE PLACE! WE ALSO FOUND THE CURRENT METER GIVES A READING THAT DOESN'T MATCH EITHER OUR KILL-A-WATT METER OR OUR AMP CLAMP STYLE CURRENT METERS; WE ARE NOT SURE WHY. THE KNOB ADJUSTS, BUT SOMETIMES IT WILL MAKE A BIGGER "JUMP" IN ADJUSTMENT THAN WE WANTED, EVEN WITH SLOW, SMOOTH TURNING OF THE DIAL. FURTHER, THE VOLTAGE OUTPUT IS SLIGHTLY OFF, UP TO ABOUT A VOLT AND A HALF HIGHER THAN DISPLAYED ON THE METER (ABOUT A PERCENT). THE STARTED RUNNING FASTER WHEN WE SET HIGHER FREQUENCIES, EVEN AT NO LOAD. WE DON'T TRUST THE CURRENT METER ON THIS UNIT, AND THE OUTPUT IS NOISY SO WE ARE OFFERING IT FOR SALE AS-IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CI 1251P AC VOLTAGE SOURCE SPECIFICATIONS: MANUFACTURER: CALIFORNIA INSTRUMENTS MODEL: 1251P AC VOLTAGE SOURCE P/N: 5002-419-1 OUTPUT POWER RATING: 1250 VA VARIABLE OUTPUT FREQUENCY: 16 TO 500 HZ VARIABLE OUTPUT VOLTAGE: 0.1 TO 270 V (L-N) CURRENT: 4.6A STEADY-STATE HIGH RANGE, 9.2ARMS STEADY STATE LOW RANGE CURRENT PEAK: 13.8 AND 27.6A INPUT: 100 TO 240 V, 50 TO 60 HZ, 1725 VA, IEC-320-C20 PLUG LCD DISPLAYS FOR VOLTAGE AND FREQUENCY/CURRENT OUTPUT (2) NEMA 5-15R OUTPUT FOR LOW VOLTAGE RANGE TYPE F OUTPUT FOR HIGH VOLTAGE RANGE OUTPUT ON/OFF SWITCH POWER FACTOR: >0.95 TYPICAL PROGRAMMABLE CONTROLLER RS-232 REMOTE CONTROL SKU: X35D014 3A-02-01(1) 35LBS - 22IN X 15IN X 15IN

HENKE SASS WOLF 4200-000V0 NORM-JECT 20ML SINGLE-USE SYRINGES (100) - MANUFACTURER: HENKE SASS WOLF MODEL: 4200-000V0 SINGLE-USE SYRINGES VOLUME: 20 ML STERILE, COMES IN INDIVIDUAL BLISTER PACKS PYROGEN-FREE, NON-TOXIC, AND PVC FREE