Electronic Lab Test Measurement Equipment Day 1 of 3 day event

[NEW] HAMILTON 36760 HVXM 6-5 DISTRIBUTION FLOW PATH 6-PORT VALVE. ALUMINUM PTFE/CTFE. NOMINAL PORT DIAMETER: 0.059" (1.5 MM). VALVE OUTER BODY DIMENSION: 1" (25.4MM). TOTAL DEAD VOLUME: 27.2. MODULAR VALVE POSITIONER THREAD DEPTH: 0.219" (5.6 MM) THREAD. CONNECTION: 1/4-28.

[2000-2030] FTS SYSTEMS XE753 AIR-JET XE PRECISION TEMPERATURE CYCLING SYSTEM TEMPERATURE RANGE: -75OC TO +225OC THERMAL FORCING UNIT FITS ON THE BENCHTOP SELF-CONTAINED ONLY REQUIRES DRY AIR, NO NITROGEN REQUIRED! MONITOR AND CONTROL FROM AN INTERNAL OR EXTERNAL (SAMPLE-MOUNTED) THERMOCOUPLE SAVE MULTI-STEP PROFILES IN THE WATLOW F4 DIGITAL CONTROLLER RS-485 OR GPIB (IEEE_488) PROGRAMMABILITY TO INTERFACE WITH AUTOMATED TEST EQUIPMENT FLOW RATES AJUSTABLE FROM 1.0 TO 4.0 SCFM (2.0 SCFM GIVES BEST TEMPERATURE CONTROL RANGE) SMALL ENOUGH TO BE RACK-MOUNTED REFRIGERATION UNIT DIMENSIONS: 24" X 15" X 16"H (APPROXIMATELY) BUILT-IN OVERTEMPERATURE SAFETY BUILT-IN LOW-FLOW SAFETY PID DIGITAL CONTROLLER RATED FOR +/-0.5O STABILITY AND REPEATABILITY (PLEASE READ TESTING NOTES!) CONTROL UNIT DIMENSIONS: 10" X 8" X 7" (APPROXIMATELY) TRANSITION SPECIFICATIONS @ 2SCFM (PLEASE READ TESTING NOTES!) -55OC TO +125OC <10 SECONDS +125OC TO -55OC <20 SECONDS POWER: 220V 50HZ (COMPATIBLE WITH 230V 60HZ) REQUIRES CLEAN DRY AIR, 7SCFM WITH -80OC DEWPOINT NO THERMAL CAPS (SAMPLE ENCLOSURES) ARE INCLUDED

[PHENIX CRYOGENIC SUPPLY] 25.25"X6.25"X6" 11-SPACE VERTICAL CRYOGENIC FREEZER RACK. MANUFACTURER: PHENIX CRYOGENIC SUPPLY. MODEL: DOES NOT APPLY. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE RACK IS IN GOOD, USED CONDITION WITH SOME SCUFFS AND SCRATCHES FROM PREVIOUS USE. THE RACK IS MISSING THE SECURITY PIN AS SHOWN IN THE PHOTOS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE UNIT WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) PHENIX CRYOGENIC SUPPLY 25.25" X 6.25" X 6" 11-SPACE VERTICAL CRYOGENIC FREEZER RACK SPECIFICATIONS: MANUFACTURER: PHENIX CRYOGENIC SUPPLY MODEL: DOES NOT APPLY CRYOGENIC FREEZER RACK 11-SPACE CONFIGURATION: VERTICAL HEIGHT: 25.25" WIDTH: 6.25" DEPTH: 6" MATERIAL: STAINLESS STEEL DOUBLE HANDLE DESIGN. SKU: W43B018 1B-07-04(1) 11LBS - 30IN X 8IN X 8IN

HP 6624A SYSTEM DC POWER SUPPLY 4X 40W OUTPUTS 0-7V, 20V, 50V - PARTS - MANUFACTURER: HEWLETT PACKARD HP MODEL: 6624A CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS POWER SUPPLY IS IN FAIR COSMETIC CONDITION WITH LOTS OF MINOR SCUFFS/SCRATCHES/STAINS FROM PRIOR USE. THERE IS AN EXTREME AMOUNT OF DUST INSIDE THIS UNIT. THE PLASTIC BRACKETS THAT HIDE THE ENDS OF THE HANDLES ARE CRACKED AND BROKEN. THE OUTPUT SELECT KEY IS POPPING OUT OF ITS HOLE. SOME OF THE OUTPUT TERMINAL SCREWS ARE MISSING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SUPPLY IS IN PARTIAL WORKING CONDITION. THE FAN DOES NOT WORK. SOME BUTTONS REQUIRE AN EXTRA-FIRM PRESS, AND SOME BUTTONS GIVE MULTIPLE INPUTS PER KEYSTROKE. WE TESTED ALL FOUR CHANNELS AND VERIFIED THEY WILL GIVE MAXIMUM RATED VOLTAGE AT NO LOAD. THE DISPLAY WORKS. WE ARE NOT ABLE TO TEST THE HP-IB INTERFACE. NO OTHER TESTING WAS DONE. THIS IS BEING SOLD AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 6624A SYSTEM DC POWER SUPPLY SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: 6624A SYSTEM DC POWER SUPPLY FOUR, 40 WATT OUTPUTS MAXIMUM OUTPUTS: CHANNELS 1 & 2: 7V 5A / 20V 2A CHANNELS 3 & 4: 20V 2A / 50V 0.8A TWO RANGES FOR EACH OUTPUT (0-7V AND 0-20V, 0-20V AND 0-50V) INDIVIDUALLY PROGRAMMABLE OUTPUTS REMOTE SENSE CAPABLE GPIB COMMUNICATIONS RACK MOUNTING TABS AND SIDE HANDLES (NO FEET) POWER INPUT REQUIREMENT: 100/120/220/240 50/60HZ 46LBS - 25IN X 25IN X 12IN

1994 HEWLETT PACKARD HP 6032A SYSTEM DC POWER SUPPLY 1000W 0-60V 0-50A 120VIN KNOB BROKEN OFF - PARTS. HP MODEL: 6032A. CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN FAIR COSMETIC CONDITION, WITH LOTS OF MINOR SCUFFS/SCRATCHES AND RESIDUES FROM PRIOR USE. THE ADJUSTMENT KNOB IS MISSING, AND ITS SHAFT IS BROKEN-OFF. WE OPENED THE FRONT PANEL AND CUT A GROOVE IN THE STUB OF THE SHAFT, SO IT IS ABLE TO BE TURNED WITH A SMALL STRAIGHT SCREWDRIVER. THERE WAS A LOT OF DUST IN THE UNIT, SO YOU WILL WANT TO CLEAN IT OUT WHEN YOU REPLACE THE ROTARY ENCODER. SEVERAL TERMINAL SCREWS ARE MISSING ON THE BACK PANEL. FROM THE HANDWRITING ON THE TOP/BACK CORNER, WE THINK THIS UNIT MAY BE FROM 1994. THIS SUPPLY IS IN PARTIAL WORKING CONDITION. WE NOTED THAT, WITHOUT INCREASING THE CURRENT ADJUSTMENT, THE VOLTAGE WILL RISE WHEN INCREASED AND THEN FALL OFF. AFTER ADJUSTING THE CURRENT LIMIT TO ABOUT 0.4A, IT WAS ABLE TO INCREASE VOLTAGE NORMALLY. AFTER BEING ON FOR A WHILE, IT "ONLY" REQUIRED ABOUT 0.1A REQUIRED TO INCREASE VOLTAGE. THIS SUPPLY WILL NOT BE FULLY ABLE TO SUPPLY AND MEASURE LOW-CURRENT OUTPUT! THE FAN RUNS, BUT SOUNDS PRETTY ROUGH AT INITIAL START-UP. CONTROLS RESPOND AS EXPECTED TO USER INPUTS. THE DISPLAYS ARE BRIGHT. THERE IS A "HOT DUSTY" SMELL AFTER A SHORT TIME OF OPERATION AT FULL-POWER OUTPUT. NO OTHER TESTING WAS DONE. THIS IS BEING SOLD AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 6032A POWER SUPPLY. SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: 6032A SYSTEM POWER SUPPLY HP-IB COMMUNICATIONS/PROGRAMMING OUTPUT: 0 TO 60V DC, 0 TO 50 AMPS, 1064 WATTS MAX. INPUT: 120V 48-63HZ 24A MAX. NOT WORKING PROPERLY! SOLD AS-IS! SKU: Y34D009 2B-03-03(1) 40LBS - 23IN X 23IN X 10IN

[AGILENT DSO80804A] AGILENT DSO80804A 8GHZ 4 CHAN. PASSES SELF TEST, WORKING BUT DEAD BATTERY-PARTS - MANUFACTURER: AGILENT MODEL: DSO80804A CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS SCOPE IS IN FAIR COSMETIC CONDITION WITH MINOR BLEMISHES FROM PRIOR USE. THERE ARE A FEW SCUFFS AND SCRATCHES HERE AND THERE, NOTHING MAJOR, MOSTLY ON THE "BOTTOM" WHEN IT IS RESTING WITH THE HANDLE FACING UP. THIS CAME TO US WITH A NOTE FROM THE PREVIOUS OWNER, "WIN XP SCOPE DO NOT DEPLOY!" THE TEKTRONIX CALIBRATION STICKER IS FROM 2020. THE CALIBRATION STATUS IN THE SCOPE SAYS "CALIBRATED". THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SCOPE IS IN MOSTLY-WORKING CONDITION. THE CMOS BATTERY IS DEAD, WHICH PREVENTS THE UNIT FROM LOADING WINDOWS. A KEYBOARD MUST BE USED TO GET PAST THE "F1 TO CONTINUE OR DEL TO ENTER SETUP" SCREEN, AND RESET THE DATE IF THE UNIT IS UNPLUGGED. THIS IS LESS INCONVENIENT THAT IT MIGHT SOUND, HOWEVER: YOU ALSO NEED A KEYBOARD AND MOUSE TO OPERATE EVERYTHING BUT THE MOST BASIC OSCILLOSCOPE CONTROLS, ON THIS TYPE OF OSCILLOSCOPE. ONCE THE SCOPE BOOTS, IT IS ABLE TO DISPLAY SIGNALS TO 8GHZ ON EACH CHANNEL, AS WELL AS DISPLAY 8GHZ ON ALL CHANNELS SIMULTANEOUSLY, AND EVEN AUTOSCALE ON ALL FOUR CHANNELS UP TO 6GHZ. USING THE SAME CABLE WITH THE SAME SIGNAL ON EACH CHANNEL INDIVIDUALLY, VERTICAL MEASUREMENTS OF WAVEFORMS ARE CLOSE TO EACH OTHER, BUT NOT EXACT (WITHIN A FEW %). THIS UNIT PROBABLY SHOULD BE RECALIBRATED. AT HIGH FREQUENCIES, THE SIGNALS DISPLAYED ONSCREEN ARE A LITTLE UNSTEADY (LOOK AT THE QUICKMEAS+ READOUT AND SHAKY SIGNAL ON AN 8GHZ WAVEFORM IN THE PHOTOS). THE DISPLAY IS CLEAR AND BRIGHT. KEYBOARD TESTS PASS. SELF-TESTS PASS. THE LEDS ALL LIGHT UP, BUT THEY LIGHT UP SURPRISINGLY DIMLY. THE OPTICAL DRIVE WORKS. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT DSO80804A INFINIIUM HIGH PERFORMANCE DIGITAL STORAGE OSCILLOSCOPE SPECIFICATIONS: MANUFACTURER: AGILENT TECHNOLOGIES MODEL: DSO80804A INFINIIUM HIGH PERFORMANCE DIGITAL STORAGE OSCILLOSCOPE BANDWIDTH: TO 8 GHZ SAMPLING: TO 40GSA/S 4 CHANNELS COLOR LCD DISPLAY GPIB INTERFACE INSTALLED OPTIONS: EZJIT PLUS, HIGH SPEED SERIAL, NOISE REDUCTION, EXT REF CLK, 001, 003, 004, 005, 093 OPERATING SYSTEM: WINDOWS XP POWER REQUIREMENT: 100-240V 47-63HZ 550W SOLD AS-IS, PLEASE READ TESTING NOTES! SKU: Y08D013 3B-07-02(1) 38LBS - 25IN X 25IN X 14IN

EFD NORDSON 1500XL ADHESIVE FLUID DISPENSER. MANUFACTURER: EFD NORDSON, MODEL: 1500XL, DESCRIPTION: ADHESIVE FLUID DISPENSER, POWER: 100/120/220 VAC 50/60 HZ 14/12 VA, CYCLE RATE: >600/MINUTE, TIME CONTROL: MICROPROCESSOR WITH 0.00005-SECOND REPEATABILITY, TIME RANGE: PROGRAMMABLE 0.001 TO 99.9 SECONDS, INITIATION: MOMENTARY, AIR INPUT: 80 TO 100 PSI (5.5 TO 6.9 BAR), AIR OUTPUT: 0 TO 100 PSI (0 TO 6.9 BAR). THIS FLUID DISPENSER WAS PLUGGED IN WITH ONE OF OUR IN-HOUSE POWER CABLES (NOT INCLUDED) AND POWERED ON. THE UNIT TURNED ON AND SEEMED TO FUNCTION WITHOUT ISSUE HOWEVER DUE TO LACK OF EQUIPMENT WE COULD NOT TEST FURTHER. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) EFD NORDSON 1500 XL 1500XL DOSING LIQUID ADHESIVE FLUID DISPENSER 0 - 100 PSI. SKU: X48G027.

2016 APPLIKON ADI2016 HEAVY DUTY TITROLYZER - WET, DIRTY - PARTS (2) - THESE SYSTEMS ARE IN FAIR COSMETIC CONDITION. THEY BOTH GOT WET INSIDE, SO THERE IS MOISTURE AND VISIBLE CORROSION. BOTH HAVE VISIBLY DISCONNECTED CABLES, AND ONE HAS SOME VALVES DISASSEMBLED AS WELL. WE ARE NOT SURE WHY. THE OUTSIDES HAVE SOME RESIDUES THAT COULD BE WATER STAINS AS WELL. THE POWER CORDS HAVE BEEN CUT OFF. THE DOOR HINGES ARE BROKEN. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE DID NOT TEST THESE SYSTEMS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) APPLIKON ADI 2016 TITROLYZERS SPECIFICATIONS: MANUFACTURER: APPLIKON MODEL: ADI2016 HEAVY DUTY TITROLYZER ADI201Y SERIES NOT TESTED WET AND CORRODED INSIDE, SOLD AS-IS! SKU: V37D005 5B-14-03(1) 215LBS - 51IN X 40IN X 34IN

CORRECT TOKYO OBJECTIVE LENS 10X M PLAN APO 10 0.25 SLWD M26 - MANUFACTURER: CORRECT TOKYO MODEL: MPLANAPO 10X CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS LENS IS IN GOOD COSMETIC CONDITION THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE ARE NOT ABLE TO TEST THIS ITEM. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CORRECT TOKYO M PLAN APO 10X LENS SPECIFICATIONS: MANUFACTURER: CORRECT TOKYO (SEIWA) MICROSCOPE OBJECTIVE LENS MAGNIFICATION: 10X NUMERICAL APERTURE: 0.25 M PLAN APOCHROMAT OPTICS INFINITY CORRECTED FOR USE WITHOUT COVER SLIP SUPER LONG WORKING DISTANCE M26 MOUNTING THREADS SKU: X39D015 1E-08-02(1) 2LBS - 6IN X 6IN X 4IN

[8] HP/AGILENT PASSIVE VOLTAGE OSCILLOSCOPE PROBES 10:1 ATTENUATION, MANUFACTURER: HEWLETT PACKARD HP MODEL: 10074C. THESE PROBES ARE IN FAIR COSMETIC CONDITION, WITH SCUFFS/SCRATCHES/RESIDUES FROM PRIOR USE AND SOME COSMETIC BLEMISHES ON LABELS. THESE PROBES WERE ALL GIVEN A QUICK CHECK TO BE SURE THEY PASS SIGNAL (THEY DO). NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1)A PROBE (2)7 PROBES (2) AGILENT 10074C PROBES (2)A PROBES (1)B PROBE SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD & AGILENT TECHNOLOGIES PASSIVE VOLTAGE PROBES FOR OSCILLOSCOPE INPUTS 10:1 ATTENUATION VARIOUS STYLES AND LENGTHS.

(8) NEW MICRO CARE MCC-U087ES DUPONT SONTARA CLEANMASTER STENCIL CLEANING FABRIC ROLLS MANUFACTURER: MICRO CARE CORPORATION MODEL: MCC-U087ES DESCRIPTION: DUPONT SONTARA CLEANMASTER STENCIL CLEANING FABRIC ROLLS WEIGHT (EACH): 0.35 LBS.

[DYMAX] [BLUE WAVE 200] LIGHT-WELDER 38903 BLUE WAVE 200 ULTRAVIOLET CURING SYSTEM UV - MANUFACTURER: DYMAX MODEL: BW-200 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS LOT IS IN GOOD COSMETIC CONDITION WITH ONLY MINOR SCUFFS/SCRATCHES/RESIDUES FROM PRIOR USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SYSTEM IS IN GOOD WORKING CONDITION. WHEN THE CONTACTS OF A 1/4" PLUG (NOT INCLUDED) ARE SHORTED (SIMULATING A FOOT SWITCH) THE SHUTTER OPENS AND A BRIGHT VIOLET LIGHT IS EMITTED FROM THE FIBER OUTPUT END OF THE LIGHTGUIDE (ALSO NOT INCLUDED). NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) DYMAX BW-200 UV SPOT LIGHT SPECIFICATIONS: MANUFACTURER: DYMAX MODEL: BLUE WAVE 200 (BW-200) DESCRIPTION: LIGHT-WELDER/ ULTRAVIOLET CURING SYSTEM HIGH-INTENSITY ULTRAVIOLET SPOT LAMP 200 WATTS SHORT-ARC HG VAPOR BULB ADJUSTABLE INTENSITY RATED FOR CONTINUOUS OPERATION EMITS UVA AND VISIBLE LIGHT (300-450NM) ACTUATE BY FOOT PEDAL OR PLC UNIVERSAL POWER INPUT PROVIDES CONSISTENT PERFORMANCE AT ANY VOLTAGE ELECTRONIC SHUTTER TIMED OR MANUAL SHUTTER OPENING MODES DUAL HOURS METER (SYSTEM AND LAMP HOURS) UP TO 2,000 HOURS USEFUL BULB LIFE INTENSITY OUTPUT: 40 W/CM2 TOTAL UVB: 7MW/CM2 UVA: 17+W/CM2 VISIBLE: 17+W/CM2 POWER REQUIREMENT: 115-230V 50/60HZ 2.5A ACTIVE FAN COOLING WITH STICKER "LIGHTGUIDE FILTER NOT INSTALLED" ** LIGHTGUIDE NOT INCLUDED ** FOOT PEDAL NOT INCLUDED SKU: Y15G012 3A-03-02(1) 20LBS - 16IN X 16IN X 14IN

[DYMAX] LIGHT-WELDER 38903 BLUE WAVE 200 ULTRAVIOLET CURING SYSTEM UV - BAD BULB. MANUFACTURER: DYMAX MODEL: BW-200. THIS SYSTEM IS IN PARTIAL WORKING CONDITION. THE UV BULB INSIDE THE UNIT IS BURNT OUT. WHEN THE CONTACTS OF AN IN-HOUSE 1/4" PLUG (NOT INCLUDED) ARE SHORTED (SIMULATING A FOOT SWITCH) THE SHUTTER OPENS. HOWEVER, THE UV BULB IS BURNT OUT AND NO UV LIGHT IS EMITTED FROM THE UNIT. WE USED AN IN-HOUSE BULB AND LIGHTGUIDE (NOT INCLUDED) WE KNEW WORKED FROM ANOTHER UNIT AND A BRIGHT VIOLET LIGHT IS EMITTED FROM THE FIBER OUTPUT END WHILE TESTING. SO WHILE THE UNIT ITSELF WORKS, IT WILL NEED A NEW SMR-200DX4 UV BULB BEFORE USE. THIS IS BEING SOLD AS/IS DUE TO THE BAD BULB AND MISSING PARTS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) DYMAX LIGHT-WELDER 38903 BLUE WAVE 200 ULTRAVIOLET CURING SYSTEM UV. SPECIFICATIONS: MANUFACTURER: DYMAX MODEL: BLUE WAVE 200 (BW-200) DESCRIPTION: LIGHT-WELDER/ ULTRAVIOLET CURING SYSTEM HIGH-INTENSITY ULTRAVIOLET SPOT LAMP 200 WATTS SHORT-ARC HG VAPOR BULB ADJUSTABLE INTENSITY RATED FOR CONTINUOUS OPERATION EMITS UVA AND VISIBLE LIGHT (300-450NM) ACTUATE BY FOOT PEDAL OR PLC UNIVERSAL POWER INPUT PROVIDES CONSISTENT PERFORMANCE AT ANY VOLTAGE ELECTRONIC SHUTTER TIMED OR MANUAL SHUTTER OPENING MODES DUAL HOURS METER (SYSTEM AND LAMP HOURS) UP TO 2,000 HOURS USEFUL BULB LIFE INTENSITY OUTPUT: 40 W/CM2 TOTAL UVB: 7MW/CM2 UVA: 17+W/CM2 VISIBLE: 17+W/CM2 POWER REQUIREMENT: 115-230V 50/60HZ 2.5A ACTIVE FAN COOLING WITH STICKER "LIGHTGUIDE FILTER NOT INSTALLED" NO LIGHTGUIDE NO FOOT SWITCH BAD BULB. SKU: Y15G013 3A-03-02(1) 20LBS - 16IN X 16IN X 14IN

[LEITZ WETZLAR] PL FLUOTAR 5X/0.12 MICROSCOPE OBJECTIVE LENS INFINITY - MANUFACTURER: LEITZ MODEL: 567008 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS LENS IS IN GOOD CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE BUT NOTHING THAT WOULD AFFECT FUNCTIONALITY. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS LENS WAS REMOVED FROM A WORKING MICROSCOPE SYSTEM AND IS IN GOOD WORKING CONDITION. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) LEITZ WETZLAR PL FLUOTAR 5X/0.12 567008 MICROSCOPE OBJECTIVE LENS GERMANY SPECIFICATIONS: MANUFACTURER: LEITZ WETZLAR PART NO: 567008 MODEL NO: PL FLUOTAR DESCRIPTION: MICROSCOPE OBJECTIVE LENS 5X/0.12 /0 19MM THREAD MADE IN GERMANY SKU: X29S002 1E-03-02(1) 2LBS - 6IN X 6IN X 4IN

[GENERAL SCANNING GSI 2860257-503] VIEW ENGINEERING 8100 3D LASER SCANNER. MANUFACTURER: GENERAL SCANNING INC. (VIEW ENGINEERING) MODEL: 2860257-503 3D LASER SCANNER MAXIMUM LASER POWER: 15MW PULSED OUTPUT WAVELENGTH: 833NM CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS SCANNER IS IN GOOD COSMETIC CONDITION WITH ONLY MINOR BLEMISHES FROM PRIOR USE AND SOME LIGHT SURFACE CORROSION ON THE MOUNTING FACE. THIS WAS REMOVED FROM A DECOMMISSIONED VIEW ENGINEERING 8100 AND NOT TESTED SEPARATELY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) GSI 2860257-503 3D LASER SCANNER SKU: T51D003 1E-04-03(1) 35LBS - 16IN X 16IN X 12IN

[AGILENT 66101A] DC POWER SUPPLY MODULE 0-8 VOLTS 0-18 AMPS PROGRAMMABLE. MANUFACTURER: AGILENT. MODEL: 66101A. THIS MODULE IS IN FAIR COSMETIC CONDITION WITH LOTS OF SCUFFS/SCRATCHES AND SOME RESIDUES FROM PRIOR USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). THIS UNIT WAS TESTED AND VERIFIED TO GIVE THE FULL 8V AT 16A WITH NO DIFFICULTIES. THE DISPLAYS ARE BRIGHT AND CLEAR. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT 66101A DC POWER MODULE. SPECIFICATIONS: MANUFACTURER: AGILENT TECHNOLOGIES. MODEL: 66101A. DC POWER MODULE. REGULATED, ADJUSTABLE, PROGRAMMABLE. SINGLE OUTPUT. FOR HP/AGILENT/KEYSIGHT 66000A SERIES MPS MAINFRAMES. VOLTAGE RANGE: 0 ... 8 V DC. CURRENT RANGE: 0 ... 16 A. POWER RATING: 128 WATTS. PROGRAMMING ACCURACY RATING: 3 MV, 6MA. RIPPLE AND NOISE RATING: CV 2 MV RMS, 5 MV P-P, CC 8 MA RMS. READBACK ACCURACY RATING: 2 MV, 6 MA. LOCAL OR REMOTE SENSING. OUTPUT TERMINAL ISOLATION: +/- 240 V DC. COMPATIBLE WITH OUTPUT CONNECTORS 5060-3386, 5060-3387, OR 5060-3351 (NOT INCLUDED). 9LBS - 27IN X 8IN X 6IN.

[LABCONCO 3600004] PURIFIER SERIES 115 VAC HORIZONTAL CLEAN WORK BENCH W/ STAND MANUFACTURER: LABCONCO MODEL: 3600004 DESCRIPTION: HORIZONTAL CLEAN WORK BENCH W/ STAND SERIES: PURIFIER POWER: 115 VAC 60HZ 12A 1 PHASE 99.99% EFFICIENT HEPA FILTER MINIHELIC II PRESSURE GAUGE CLASS 5 CONDITIONS PER ISO 14644-1 AND 2 (FORMERLY CLASS 100) FLUORESCENT LIGHTING GLACIER WHITE EPOXY-COATED STEEL FRAME AND EXTERIOR PANELS DOUBLE-GASKET, NEGATIVE PRESSURE HEPA FILTER LEAK PROTECTION FRONT-MOUNTED LIGHT AND BLOWER SWITCHES DIMENSIONS: 37W X 34D X 83"H

[HEWLETT PACKARD 3478A] DIGITAL MULTIMETER DMM 5-1/2 DIGIT HP-IB VINTAGE! - MANUFACTURER: HEWLETT PACKARD HP MODEL: 3478A CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS METER IS IN FAIR COSMETIC CONDITION. THE UNIT LOOKS AND FEELS DIRTY, AND HAS MANY MINOR SCUFFS/STAINS/SPOTS OF RESIDUES FROM PRIOR USE. THE FRONT PANEL HAS A TAPE APPLIED WITH THE SERIAL NUMBER OVER THE DISPLAY. THAT TAPE IS STUCK ON THERE. THE UNIT YOU RECEIVE MAY HAVE A MISSING SCREW ON THE HP-IB CONNECTOR AS SHOWN. THIS IS THE "OLDER" STYLE OF UNIT, WITH METAL COVERS. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS METER IS IN GOOD WORKING CONDITION. THE POWER-ON SELF-TEST GIVES A "SELF TEST OK" MESSAGE. ALL THE MEASUREMENTS FROM THE FRONT PANEL INPUTS ON AC AND DC VOLTS, AC AND DC CURRENT, 2-WIRE AND 4-WIRE OHMS WERE CLOSE TO WHAT WE WOULD GET ON OUR REFERENCE METER. THE DISPLAY IS CLEAR AND EASY TO READ. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 3478A MULTIMETER SPECIFICATIONS: MANUFACTURER: HEWLETT-PACKARD MODEL: 3478A DIGITAL MULTIMETER 3-1/2 TO 5-1/2 DIGIT RESOLUTION (USER SELECTABLE OR AUTORANGE) HP-IB/GPIB COMPATIBLE FRONT- AND REAR-PANEL INPUTS SKU: Y33D018 1E-06-04(2) 10LBS - 18IN X 12IN X 8IN

[ETS 5532] LARGE LABORATORY INTEGRATED CONTROLLED ENVIRONMENTAL CHAMBER/GLOVE BOX. MANUFACTURER: ETS ELECTRO-TECH SYSTEMS, MODEL: 5532. THIS CHAMBER IS IN GOOD COSMETIC CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM REGULAR USE. FEATURES A SOLID FRONT DOOR AND A GLOVE DOOR. POWER APPLIED TESTED LIGHT, FAN, TEMPERATURE CONTROLLER, AND HUMIDITY CONTROLLER. TEMPERATURE CONTROLLER REACHED 45OC (SET TO 57OC) WITH FLUCTUATIONS OF ABOUT 4O. HUMIDITY CONTROLLER ACHIEVED A LOW OF 12.4% (SET TO 1.0%) WITH FLUCTUATIONS AROUND 12%-14%. BOTH DOORS' HINGES AND LOCKS OPERATED SMOOTHLY. INTERNAL OUTLET VERIFIED 120V OUTPUT. INCLUDES (1) ETS 5532 LARGE LABORATORY INTEGRATED CONTROLLED ENVIRONMENTAL CHAMBER/GLOVE BOX, (1) SOLID FRONT DOOR, (1) OPERATING MANUAL. SPECIFICATIONS: INTERNAL DIMENSIONS: 38.75 W X 20 D X 21 H (98CM X 51XM X 53XM). EXTERNAL DIMENSIONS: 52 W X 25 D X 22 H (132CM X 64CM X 56CM). MATERIAL: 3/8 INCH CLEAR & WHITE ACRYLIC. GLOVES: .018 (0.5MM) LATEX, 6 (15CM) PORTS. RH/ TEMPERATURE SENSOR ACCURACY: RH: 2.0% RH AT 68F (20C) AND 0-90% RH, 3.0% RH AT 68F (20C) AND 90-100% RH. TEMP: 0.4 F ( 0.2 C) AT 20C. POWER: VOLTAGE: 115/230 VAC 50/60HZ. CURRENT: 8AMP/4AMPS. DUAL MICROPROCESSOR PID CONTROLLERS: TWO (2) CAL 9500, MULTIPLE RAMP/SOAK CYCLES. RESOLUTION: 0.1%/0.1. INTEGRATED INTERNAL LIGHTING. INTEGRATED GFIC AC POWER OUTLET. TWO DOORS WITH 12-TURN LATCHES. FRONT DOOR OPENING: 32X14 (8136 CM). SIDE DOOR OPENING: 14X4 (3610 CM). STANDARD 1.5 DIA. CABLE PASS-THROUGH, HOSE BARBS & COMPRESSION FITTINGS.

[FERRAN SCIENTIFIC CNL-01] MICROPOLE ANALYZER INTERFACE MODULE W/ GAS ANALYZER. MANUFACTURER: FERRAN SCIENTIFIC MODEL: CNL-01. THIS MICROPOLE IS IN GOOD CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE. REMOVED FROM A WORKING SYSTEM AND HAS NOT BEEN TESTED SINCE ITS REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) FERRAN SCIENTIFIC CNL-01 MICROPOLE FOR ANALYZER INTERFACE MODULE ARRAY INTERFACE (1) FERRAN SCIENTIFIC SC3-14 MICROPOLE RESIDUAL GAS ANALYZER SPECIFICATIONS: MANUFACTURER: FERRAN SCIENTIFIC MODEL: CNL-01 DESCRIPTION: MICROPOLE COMES WITH SC3-14 MICROPOLE RESIDUAL GAS ANALYZER. SKU: Y08S001 2C-03-02(1) 6LBS - 12IN X 12IN X 12IN

[KEYSIGHT U5856A] IR THERMAL IMAGER COLOR CAMERA -20 TO +650C W/ CASE, MANUAL. KEYSIGHT U5856A TRUEIR SERIES THERMAL IMAGER TEMPERATURE MEASUREMENT RANGE: -20 ... 650OC IN 2 RANGES THERMAL SENSITIVITY: 0.07 OC AND 0.5OC 3.5" TFT LCD DISPLAY DETECTOR RESOLUTION: 160 X 120 FINE RESOLUTION (IN-CAMERA): 320 X 240 IR PIXELS UNCOOLED FOCAL PLANE ARRAY DETECTOR VISIBLE CAMERA: 3.1 MP SPECTRAL RANGE: 8 TO 14 M FRAME RATE: 9 HZ FIELD OF VIEW: 28 X 21 O SPATIAL RESOLUTION (IFOV): 3.2 MRAD; 2.1 MRAD (WITH FINE RESOLUTION) FOCAL DISTANCE: 10 CM TO INFINITY MANUAL FOCUS CORRECTION PARAMETERS: EMISSIVITY, REFLECTED TEMPERATURE, OBJECT DISTANCE, AMBIENT TEMPERATURE, RELATIVE HUMIDITY, TRANSMISSION EMISSIVITY CORRECTION: 0.1 TO 1.0 DIGITAL ZOOM: 4X CONTINUOUS CAMERA MODES: IR IMAGE, VISIBLE IMAGE, PICTURE IN PICTURE, BLEND MEASUREMENTS: CENTER SPOT, 3X MOVABLE SPOTS, MAX/MIN TRACKING, DELTA TEMPERATURE, 3X MOVABLE BOXES (WITH MIN/MAX/AVG) STORAGE: SUPPORTS UP TO 32 GB SDHC STORES IR, VISIBLE, OR FUSION IMAGES AT DEFINED INTERVALS (7 TO 3600 SECONDS) I/O: USB 2.0, NTSC/PAL VIDEO RECHARGEABLE, REMOVABLE LI-ION BATTERY LED FLASHLIGHT CLASS 2 LASER POINTER INGRESS PROTECTION: IP54 PADLOCKABLE CASE WITH FOAM INSERT LINING DIMENSIONS: 250 X 94 X 85 MM, 746 G WITH BATTERY. INCLUDED: (1) KEYSIGHT U5856A THERMAL IMAGER (1) KEYSIGHT UR-123 RECHARGEABLE BATTERY PACK (1) 0950-5831 POWER SUPPLY (1) 8120-6825 POWER CABLE (1) U5857-90012 QUICK START GUDE BOOK (1) 5962-0476 CERTIFICATE OF CALIBRATION (FROM 2020) (1) TRANSCEND 4GB SDHC CARD (758-2556) (1) 8121-1583 USB CABLE (1) 5067-4898 VIDEO CABLE (1) U5855-65000 PADDED STRAP (1) U5855-65002 STRAP (1) HARD CARRYING CASE.

MILLIPORE XX6700P05 STAINLESS STEEL 5-LITER DISPENSING PRESSURE VESSEL 100PSI

2017 KEYSIGHT 5517D-C19 HENE LASER RED INTERFEROMETER LASER 377UW SPLIT FREQ: 3.8MHZ HENE LASER A.K.A. ASML 4022.454.71616 NAMEPLATE POWER: 377 UW SPLIT FREQ.: 3.8 MHZ DESIGNED FOR USE WITH HEWLETT PACKARD/AGILENT/KEYSIGHT INTERFEROMETRY EQUIPMENT VISIBLE PART NUMBERS INSIDE: KEYSIGHT 05517-38224 HELIUM-NEON GAS LASER SERNO 171662 38224 9MM (HAND-WRITTEN ON THE TUBE) KEYSIGHT 0950-5216 VMI PS 504 POWER SUPPLY SERNO 06345 05517-60316 CABLE 05501-68129-35-1709-0378 PCB 05517-68130-5619-36-201737-00008 PCB 05517-68133-5315-23-201739-00039 PCB 5315 AGILENT 05517-20131 PCB U15 VER21 SKU: Y16D007 3A-01-02(1) 10LBS - 18IN X 12IN X 9IN

[EFD NORDSON 1500 XL] DOSING LIQUID ADHESIVE FLUID DISPENSER 0-100 PSI - MANUFACTURER: EFD NORDSON MODEL: 1500XL CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS ITEM IS IN FAIR COSMETIC CONDITION WITH MINOR SCUFFS AND SCRATCHES. THE SIDE PLASTIC HOUSING OF THIS UNIT IS CRACKED, BROKEN, AND MISSING A SMALL PIECE HOWEVER THIS DOESN'T APPEAR THAT IT WOULD AFFECT FUNCTIONALITY. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS FLUID DISPENSER WAS PLUGGED IN WITH ONE OF OUR IN-HOUSE POWER CABLES (NOT INCLUDED) AND POWERED ON. THE UNIT TURNED ON AND SEEMED TO FUNCTION WITHOUT ISSUE HOWEVER DUE TO LACK OF EQUIPMENT WE COULD NOT TEST FURTHER. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) EFD NORDSON 1500 XL 1500XL DOSING LIQUID ADHESIVE FLUID DISPENSER 0 - 100 PSI SPECIFICATIONS: MANUFACTURER: EFD NORDSON MODEL: 1500XL DESCRIPTION: ADHESIVE FLUID DISPENSER POWER: 100/120/220 VAC 50/60 HZ 14/12 VA CYCLE RATE: >600/MINUTE TIME CONTROL: MICROPROCESSOR WITH 0.00005 SECOND REPEATABILITY TIME RANGE: PROGRAMMABLE 0.001 TO 99.9 SECONDS INITIATION: MOMENTARY AIR INPUT: 80 TO 100 PSI (5.5 TO 6.9 BAR) AIR OUTPUT: 0 TO 100 PSI (0 TO 6.9 BAR) SKU: X48G026 5A-02-02(1) 9LBS - 16IN X 12IN X 8IN

[AGILENT N5741A] DC SYSTEM POWER SUPPLY 0-6.000 V 0-100.0A 600W RACK MNT. DIGITAL - MANUFACTURER: AGILENT TECHNOLOGIES MODEL: N5741A CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN FAIR COSMETIC CONDITION WITH MINOR SCUFFS/SCRATCHES FROM PRIOR USE. THE UNIT YOU RECEIVE MAY HAVE SOME "RACK RASH" TYPE SCRATCHES TOP AND BOTTOM, AND/OR A FEW DINGS HERE AND THERE. THE WORST EXAMPLES FROM A FEW DIFFERENT SUPPLIES WE HAVE IN STOCK ARE SHOWN. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: WE GAVE THIS SUPPLY A QUICK TEST AND FOUND IT EASILY GIVES FULL RATED CURRENT AND VOLTAGE. WE ARE NOT EQUIPPED TO TEST 100A AT 6V, BUT WE GOT 100A AT 0.1V WITH A PIECE OF FAT WIRE AS A LOAD, AND 60A AT 6V USING OUR ELECTRONIC LOAD. DIALS RESPONDED AS EXPECTED IN COARSE AND FINE MODE, THE OUTPUT ON/OFF AND LIMIT SWITCHES WORKED AS EXPECTED. VOLTAGE AND CURRENT LIMITED OPERATION WORKED WELL. FANS INCREASED SPEED WITH INCREASING LOAD. THE DISPLAYS ARE BRIGHT AND CLEAR. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT N5741A POWER SUPPLY SPECIFICATIONS: MANUFACTURER: AGILENT TECHNOLOGIES MODEL: N5741A DC SYSTEM POWER SUPPLY MAXIMUM OUTPUT: 6V, 100A, 600W MINIMUM ADJUSTABILITY: 0.001V, 0.1A UNIVERSAL AC INPUT 100-240V 50-60HZ 970VA DIGITAL DISPLAYS FOR CURRENT AND VOLTAGE GPIB IEEE-488, LAN, USB, LXI REMOTE CONTROL FRONT PANEL LOCAL CONTROL WITH SEPARATE CURRENT/VOLTAGE DIALS COARSE AND FINE MULTI-TURN TUNING CONTROLS ANALOG/RESISTANCE CONTROL REMOTE SENSE CAPABLE CV OR CC MODE, AUTOMATIC SWITCHOVER OVER/UNDER VOLTAGE PROTECTED COMPACT DIMENSIONS: 1U RACKMOUNT SIZE OUTPUT: FLAT LUGS INPUT: IEC-320-C14

[AGILENT N5741A] DC SYSTEM POWER SUPPLY 0-6.000 V 0-100.0A 600W RACK MOUNT, DENTED - MANUFACTURER: AGILENT TECHNOLOGIES MODEL: N5741A CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN FAIR COSMETIC CONDITION WITH MOSTLY MINOR SCUFFS/SCRATCHES FROM PRIOR USE. THERE IS A DENT IN THE TOP PANEL BEHIND THE CONTROLS OVER THE HP-IB INTERFACE CONNECTOR. THE SHEET METAL BEHIND THE PLASTIC FRONT COVER AROUND THE POWER SWITCH IS BENT; THE PLASTIC HAS BROKEN ANCHOR POSTS THAT FORMERLY HELD IT TO THE STEEL, AND THE FRONT PANEL IS CRACKED IN THE MIDDLE. IMAGES SHOWING THE UNIT BEING TESTED ARE NOT OF THIS UNIT, WE HAVE SEVERAL AND THEY ALL GOT THE SAME TESTING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE GAVE THIS SUPPLY A QUICK TEST AND FOUND IT EASILY GIVES FULL RATED CURRENT AND VOLTAGE. WE ARE NOT EQUIPPED TO TEST 100A AT 6V, BUT WE GOT 100A AT 0.1V WITH A PIECE OF FAT WIRE AS A LOAD, AND 60A AT 6V USING OUR ELECTRONIC LOAD. DIALS RESPONDED AS EXPECTED IN COARSE AND FINE MODE, THE OUTPUT ON/OFF AND LIMIT SWITCHES WORKED AS EXPECTED. VOLTAGE AND CURRENT LIMITED OPERATION WORKED WELL. FANS INCREASED SPEED WITH INCREASING LOAD. THE DISPLAYS ARE BRIGHT AND CLEAR. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT N5741A POWER SUPPLY SPECIFICATIONS: MANUFACTURER: AGILENT TECHNOLOGIES MODEL: N5741A DC SYSTEM POWER SUPPLY MAXIMUM OUTPUT: 6V, 100A, 600W MINIMUM ADJUSTABILITY: 0.001V, 0.1A UNIVERSAL AC INPUT 100-240V 50-60HZ 970VA DIGITAL DISPLAYS FOR CURRENT AND VOLTAGE GPIB IEEE-488, LAN, USB, LXI REMOTE CONTROL FRONT PANEL LOCAL CONTROL WITH SEPARATE CURRENT/VOLTAGE DIALS COARSE AND FINE MULTI-TURN TUNING CONTROLS ANALOG/RESISTANCE CONTROL REMOTE SENSE CAPABLE CV OR CC MODE, AUTOMATIC SWITCHOVER OVER/UNDER VOLTAGE PROTECTED COMPACT DIMENSIONS: 1U RACKMOUNT SIZE OUTPUT: FLAT LUGS INPUT: IEC-320-C14 SKU: X33D007 3A-05-02(1) 18LBS - 23IN X 23IN X 6IN

[SPECTRA PHYSICS] 161C-010 HEAD & 263-C0421 POWER SUPPLY W/ 2 KEYS NO CABLES PARTS. MANUFACTURER: SPECTRA PHYSICS LASERS, INC. MODEL: 161C-010. LASER HEAD WITH POWER SUPPLY. LASER TUBE MARKED MODEL 0092-0000. INCLUDED: (1) MODEL 263-C0421 POWER SUPPLY/CONTROL, (1) MODEL 161C-010 LASER HEAD, (1) OPTICAL FIXTURE, (2) KEYS. SPECIFICATIONS: 19LBS - 18IN X 18IN X 14IN

[BAXTER Y1121A OPTX 300 XENON LIGHT SOURCE WITH 4-PORT TURRET 110VAC] MANUFACTURER: BAXTER MODEL: Y1121A DESCRIPTION: XENON LIGHT SOURCE OPTX 300 4-PORT TURRET 110VAC SKU: W30H003 30LBS - 16IN X 16IN X 10IN

[AGILENT TECHNOLOGIES 6652A SYSTEM DC POWER SUPPLY 0-20V 0-25A 120V] BUSTED FRONT - MANUFACTURER: AGILENT TECHNOLOGIES MODEL: 6652A CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN FAIR COSMETIC CONDITION. THERE ARE SCUFFS/SCRATCHES AND RESIDUES ALL OVER, MOSTLY ON TOP. THE FRONT PANEL IS VISIBLY DENTED AND CRACKED ON THE BOTTOM/LEFT CORNER. THE TABS TO HOLD THE FRONT COVER TO THE CHASSIS ARE ALL BROKEN; THE FRONT PANEL IS HELD ON BY SCREWS IN THE PLACES WHERE RACK MOUNT TABS ARE SUPPOSED TO MOUNT. THE BRACKETS THAT MAKE THE SCREWS TO HOLD THE HANDLES LOOK PRETTY ARE BROKEN. THIS UNIT HAS THE LOCAL SENSE FUNCTION REMOVED . . . BUT THERE IS A PLUG WITH JUMPER WIRES AS SHOWN, WHICH RESTORES LOCAL SENSE CAPABILITY. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SYSTEM IS IN GOOD WORKING CONDITION. WE USED OUR OWN DUMMY LOAD TO DRAW FULL RATED VOLTAGE AND CURRENT WITH NO DIFFICULTY. (SEE PHOTO #5). KNOBS AND BUTTONS RESPONDED AS EXPECTED TO USER INPUTS. THE DISPLAYS ARE CLEAR AND EASY TO READ. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT 6652A SYSTEM DC POWER SUPPLY SPECIFICATIONS: MANUFACTURER: AGILENT TECHNOLOGIES MODEL: 6652A SYSTEM DC POWER SUPPLY OUTPUT: 0-20VDC, 0-25A (500W) PROGRAMMING ACCURACY RATINGS: VOLTAGE 0.06% +10MV, 0.15% +25MA SPEED-CONTROLLED FAN MINIMIZES ACOUSTIC NOISE REAL-TIME DIGITAL CURRENT AND VOLTAGE METERS KNOBS, BUTTONS, OR PROGRAMMABLE VOLTAGE AND CURRENT REMOTE SENSING GPIB COMMUNICATIONS & PROGRAMMING SKU: X36D009 5F-21-02(1) 58LBS - 25IN X 25IN X 12IN

[HAMILTON] [80922] HAMILTON 80922 1705 TLLX 50L GASTIGHT INSTRUMENT SYRINGE SPECIFICATIONS: MANUFACTURER: HAMILTON MODEL: 80922 DESCRIPTION: SYRINGE 1705 TLLX 50L GASTIGHT PTFE LUER LOCK INSTRUMENT SYRINGE X-STYLE BOROSILICATE GLASS, PTFE 1000 PSIG

PLASTRONICS 28QH50A15050-A CLAMSHELL 28-PIN IC TEST/BURN-IN SOCKET - MANUFACTURER: PLASTRONICS MODEL: 28QH50A15050-A CONDITION: NEW OTHER. COMES IN NON-ORIGINAL PACKAGING. THIS TEST SOCKET IS BRAND NEW AND HAS BEEN REPACKAGED WITH ESD FOAM INSIDE OF AN ESD SAFE BAG. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) PLASTRONICS 28QH50A15050-A BURN-IN/TEST SOCKET SPECIFICATIONS: MANUFACTURER: PLASTRONICS PART #: 28QH50A15050-A DESCRIPTION: BURN-IN/TEST SOCKET PACKAGE TYPE: CLAMSHELL LEAD COUNT: 28-PIN CONDITION: NEW QUANTITY: 1 SKU: N12P018 1E-07-04(20) 2LBS - 6IN X 4IN X 4IN

[12" DESICCATOR JAR] NON-VACUUM LAB GLASS WITH PORCELAIN PLATE - MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY CONDITION: NEW OTHER. COMES IN NON-ORIGINAL PACKAGING. THIS JAR CAME TO US WITH A THICK LAYER OF GREASE ALL AROUND THE OPENING WHICH PROVIDED AN EFFECTIVE SEAL BUT MADE THE JAR VERY DIFFICULT TO OPEN. SOMEONE HAD TRIED TO PRY IT OPEN AND CHIPPED THE TOP GLASS AT SOME POINT (SEE PHOTO 5) BUT THE CHIP DOES NOT GO EVEN 1/2 ACROSS THE LIP. THE EDGES OF THE CHIPPED AREA ARE NOT RAZOR-SHARP. OTHERWISE THE JAR IS IN GOOD COSMETIC CONDITION WITH ONLY MINOR RESIDUES FROM PRIOR USE. THE PLATE INSIDE HAS SOME COSMETIC CRACKS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE JAR CAME TO US AFTER SITTING IN A WAREHOUSE FOR SEVERAL YEARS AND THE DESICCANT INSIDE WAS STILL BLUE (DRY). NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) 12" DESICCATOR JAR (1) LID (1) SEPARATOR PLATE SPECIFICATIONS: DESICCATOR JAR "12" SIZE, APPROXIMATELY 11.75" INSIDE DIAMETER AT OPENING WITH PORCELAIN PLATE SHELF CRACKED LID DOES NOT AFFECT FUNCTION, SEE PHOTOS! SKU: W11D013 3A-06-02(1) 24LBS - 18IN X 18IN X 18IN

[HP 6032A SYSTEM DC POWER SUPPLY 1000W 0-60V 0-50A 120VIN] MANUFACTURER: HEWLETT PACKARD HP MODEL: 6032A CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN FAIR COSMETIC CONDITION, WITH LOTS OF MINOR SCUFFS/SCRATCHES AND RESIDUES FROM PRIOR USE. THE MAIN INPUT COVER IS MISSING. THERE IS MEASLING ON THE POWER FILTER PCB AND LOTS OF CHARRING NEAR THE TERMINALS AND ON THE CAPACITORS. THIS CAME TO US WITH A NOTE SAYING THAT THE POWER TERMINALS WERE BAD AND NEEDED REPAIR. THEY ARE NOW WORSE, AND NEED MORE REPAIR! THIS IS BEING SOLD AS/IS FOR PARTS OR REPAIR ONLY. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS UNIT IS NOT WORKING PROPERLY. WE FOUND THE POWER TERMINALS MISSING THEIR MAIN CONNECTION SCREWS, SO WE INSTALLED SOME SCREWS AND PROCEEDED TO GET NORMAL OUTPUT VOLTAGE AND CURRENT, AND IT SEEMED TO WORK. WE MOVED TO OUR PHOTOGRAPHY BENCH AND . . . THE MAIN INPUT FILTER CAUGHT FIRE A LITTLE BIT. WE'RE NOT SURE WHY, BUT WE'RE GONNA GO AHEAD AND ASSUME THERE'S A PROBLEM WITH THIS UNIT BEYOND OUR EXPERTISE TO FIX! NO OTHER TESTING WAS DONE. THIS IS BEING SOLD AS/IS FOR PARTS OR REPAIR ONLY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 6032A POWER SUPPLY SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: 6032A SYSTEM POWER SUPPLY HP-IB COMMUNICATIONS/PROGRAMMING OUTPUT: 0 TO 60V DC, 0 TO 50 AMPS, 1064 WATTS MAX. INPUT: 120V 48-63HZ 24A MAX. NOT WORKING PROPERLY! SOLD AS-IS! SKU: Y34D007 2B-01-01(1) 40LBS - 25IN X 25IN X 10IN

[UNBRANDED] [DOES NOT APPLY] 22"L X 8"H X 5.5"W STAINLESS STEEL 3-SHELF LABORATORY FREEZER RACK W/EXTRA SHELF. THE RACK IS IN GOOD, USED CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE. THE RACK WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY LABORATORY FREEZER RACK LENGTH: 22" WIDTH: 5.5" HEIGHT: 8" MATERIAL: STAINLESS STEEL 3-SHELF DESIGN INCLUDES (1) EXTRA SHELF

[USED] KINETIC SYSTEMS KS MODEL: 1201-01-11 KINETIC VIBRAPLANE 1201-01-11 VIBRATION ISOLATION 35" X 30" PNEUMATIC AIR TABLE (3) KINETIC 617-522-8700 PRECISION VALVE SPECIFICATIONS: MANUFACTURER: KINETIC SYSTEMS INC. MODEL: 1201-01-11 VIBRATION ISOLATION WORKSTATION TABLE TOP DIMENSIONS: 35" X 30" TOP HEIGHT FROM FLOOR, APPROXIMATELY: 30" HIGH-PERFORMANCE ACTIVE-AIR SUSPENSION 3-ZONE SUSPENSION, RIGHT/LEFT/BACK AUTOMATIC LEVELING AND HEIGHT CONTROL SUITABLE FOR MOVING LOADS AND HIGH CENTERS OF GRAVITY ULTRA-LOW VERTICAL NATURAL FREQUENCIES ISOLATION EFFICIENCY APPROACHING 99% 1" THICK VIBRADAMPED STEEL TOP WITH PLASTIC LAMINATE SURFACE CLASS 100 CLEANROOM COMPATIBLE INPUT AND ISOLATOR AIR PRESSURE GAUGES INPUT AIR PRESSURE REGULATOR PERFORMANCE RATINGS: MIN. LOAD @ 20 PSI VERTICAL NATURAL FREQUENCY 2.1 HZ ISOLATION EFFICIENCY @ 5 HZ 43% ISOLATION EFFICIENCY @ 10 HZ 89% HORIZONTAL NATURAL FREQUENCY 3.5 HZ ISOLATION EFFICIENCY @ 5 HZ 40% ISOLATION EFFICIENCY @ 10 HZ 80% MAX. LOAD @ 80 PSI VERTICAL NATURAL FREQUENCY 1.6 HZ ISOLATION EFFICIENCY @ 5 HZ 76% ISOLATION EFFICIENCY @ 10 HZ 93% HORIZONTAL NATURAL FREQUENCY 2.5 HZ ISOLATION EFFICIENCY @ 5 HZ 75% ISOLATION EFFICIENCY @ 10 HZ 88% GROSS LOAD CAPACITY @ 80 PSI: 1300 LBS. (590 KG) ("HEAVY DUTY") SKU: X43S015 5K-05-02(1) 520LBS - 48IN X 40IN X 38IN

[MGM INSTRUMENTS] OPTOCOMP I LUMINOMETER WITH INJECTOR. MANUFACTURER: MGM INSTRUMENTS, MODEL: OPTOCOMP I, DESCRIPTION: LUMINOMETER WITH INJECTOR, 120/240V 0.25A, 27LBS - 25IN X 18IN X 16IN.

[HEWLETT PACKARD/AGILENT] 66102A 0-20V 7.5A DC POWER MODULE FOR 66000A MAINFRAME. MANUFACTURER: HEWLETT PACKARD HP MODEL: 66102A. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS MODULE IS IN GOOD COSMETIC CONDITION WITH ONLY MINOR BLEMISHES FROM PRIOR USE. THERE ARE SOME "RACK RASH" TYPE BLEMISHES AS WELL AS A FEW MINOR DENTS/DINGS HERE & THERE, AND SOME MINOR RESIDUES FROM OLD CALIBRATION LABELS AND MAGIC MARKER ON THE PULL TAB (SEE PHOTOS). WE HAVE SEVERAL OF THESE; SOME ARE AGILENT AND SOME ARE HEWLETT PACKARD (SAME COMPANY, DIFFERENT NAMES). COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS ITEM HAS NOT BEEN TESTED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) 66102A DC POWER SUPPLY SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: 66102A DC POWER MODULE OUTPUT RANGE: 0-20VDC 0-7.5A, 150W MAX. LED CURRENT AND VOLTAGE OUTPUT DISPLAYS. SKU: Q26D019 1B-21-01(6) 9LBS - 27IN X 8IN X 8IN

[100-240VAC] RIDZEWSKI GMBH ZR-OX MK II OXYGEN ANALYSER O2/CO2 100-240VAC 0.1PPM-99.9%O2 MANUFACTURER: RIDZEWSKI GMBH MODEL: ZR-OX MK II O2/CO2 ANALYZER TYPE OF SENSOR: ZIRCONIA DIOXIDE MEASURING RANGE: 0.1 PPM - 99.9% O2 OPERATING TEMPERATURE: 800 C APPROXIMATE WARM-UP TIME: 10-35 MINUTES RELAY LOAD: 230 VAC, 3 AMPS ANALOG OUTPUT: 0/4-20MA 0 0/2-5/10 VDC, PROGRAMMABLE VOLTAGE: 100-240 VAC, 47-63 HZ INTERFACE: RS232, CAN-BUS MEASURING RANGE: 1 PPM - 65% O2 TIME OF LIFE: >250.000 % VOLUME HOURS

[UNBRANDED] [DOES NOT APPLY] USED 10-FT RESIN WORKSTATION WORK TABLE DRAWERS DOORS ADJUST-SHELVES 2 PART TABLE WITH METAL BACK PANEL. OVERALL DIMENSIONS: 122"L X 30"W X 40"H RIGHT COUNTERTOP, 36 1/4"L X 30"W X 1"H LEFT COUNTERTOP, 84"L X 30"W X 1"H 2 - CABINET SIZE, 36"L X 22"W X 35"H 7 - DRAWERS, 19 1/2"L X 13"W X 5 3/4"H 3 - DOORS, 18"L X 18"W X 21"H 1 - LEFT BACKSPLASH, 84"L X 1"W X 4"H 1 - RIGHT BACKSPLASH, 36"L X 1"W X 4"H 2 - SIDESPLASHES 29"L X 1"W X 4"H 1 - DUAL EXTRA DRAWER COMPARTMENT, 32"L X 26"W X 5"H. THE BACKSPLASH IS NOT ATTACHED. IT IS THE RESPONSIBILITY OF THE BUYER TO ATTACH THE BACKSPLASH. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SKU: V42O012 5J-04-05(1) 650LBS - 98IN X 44IN X 53IN

HAKKO T7/T15-SB08 SOLDERING TIP FOR FM-202/FP-102 SPECIFICATIONS: PART #: T7/T15-SB08 TIP SHAPE: 0.8SB FOR IRONS: HAKKO FM-203-HANDPIECE : HAKKO FM-2027(70W) HAKKO FM-204-HANDPIECE : HAKKO FM-2027(70W) HAKKO FX-950-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-951-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-952-HANDPIECE : HAKKO FM-2028(70W) HAKKO FM-202-HANDPIECE : HAKKO FM-2021(70W) OR HANDPIECE : HAKKO FM-2027(70W) NOTE: THE T15 TIPS HAVE REPLACED THE T7 TIPS. THE ONLY DIFFERENCE IS HAKKO HAS PHASED OUT THE BARCODE FROM THE TIPS. SEE THE HAKKO PRODUCT BULLETIN.

[EXTRACTLAB 70-3010] DRAINDROYD JACKETED FILTER VACUUM FILTRATION SYSTEM MANUFACTURER: EXTRACTLAB MODEL: 70-3010 DESCRIPTION: DRAINDROYD JACKETED FILTER VACUUM FILTRATION SYSTEM SYSTEM INCLUDES: 70-3013 JACKETED FILTER TOP 70-3024 CONTAINMENT VESSEL WITH EXPELLER GLACIER TANKS 2 BALL-G200 SS304 BALL VALVE GLACIER TANKS LID-G1000-300-MNPT-2075 10 X 3 SS304 CONTAINMENT VESSEL LID THE JACKETED FILTER TOP HAS A FLUID JACKET FABRICATED FROM STAINLESS STEEL. JACKET PORTS ARE QUICK DISCONNECT FOR EASY FLUID CONNECTIONS. FOUR PORTS ARE PROVIDED TO PROVIDE OPTIONAL COUNTER CURRENT EXCHANGE. DIMENSIONS: 25.5" DIAMETER (TOP) X 43.5" HEIGHT MATERIAL: STAINLESS STEEL RESERVOIR VOLUME (L): 150 COLLECTION VOLUME (GAL): 4 MAX PRESSURE (PSI): 300 CASTERS: 4X ADJUSTABLE LOCKING

[HONEYWELL] GENERAL PURPOSE RADIAMATIC PYROMETER TEMP. SENSOR - MANUFACTURER: HONEYWELL MODEL: 30075505-003 CONDITION: NEW OTHER. COMES IN UNSEALED ORIGINAL PACKAGING. THIS UNIT IS IN UNUSED CONDITION WITH MINOR SHELF WEAR. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HONEYWELL 30075505-003 RADIAMATIC TEMPERATURE DETECTOR (1) USER MANUAL SPECIFICATIONS: MANUFACTURER: HONEYWELL MODEL: 30075505-003 TARGET DIAMETER NOT LESS THAN DISTANCE DIVIDED BY: 20 MIN. DIA. 34,93MM/1.375 INCH TYPE: R.L.-1 MFG NO. A-9131 SKU: T15A006 4A-01-03(1) 7LBS - 12IN X 12IN X 12IN

VWR 10754-818 500ML CHEMICAL RESISTANT MEDIA STORAGE BOTTLES (14) - MANUFACTURER: VWR MODEL: 10754-818 MEDIA STORAGE BOTTLES WITH GL SCREW CAPS FEATURES: CHEMICAL RESISTANT, HIGH THERMAL SHOCK RESISTANCE, SCALE GRADUATIONS, AUTOCLAVABLE CAPACITY: 500 ML, 16.9 OZ AUTOCLAVABLE: UP TO 180 C MATERIAL: TYPE 1, CLASS A, BOROSILICATE GLASS BOTTLE OPENING: 30 MM INTERNAL DIAMETER HEIGHT: 176 MM CAP SIZE: GL 45 TOLERANCE: 1.5 MM BOTTOM DIAMETER: 86 MM

[AFF INTERNATIONAL 30396-17-11 MEGACEL CLEANROOM AIR FILTER W/ SPEED CONTROLLER] MANUFACTURER: AFF INTERNATIONAL MODEL: 30396-17-11 MEGACEL CLEANROOM AIR FILTER EFFICIENCY: 99.99995% MPPS RES: 45 IN. W.G. TEST FLOW: 413 CFM SIZE: 22.75" X 29.5" X 2.75" MODEL: 857-087592-001A KIT,INSTL,FFU,ELD,WTM,PTF VOLTAGE: 120V MODEL: HAA0191A MANUAL SPEED CONTROLLER VOLTAGE: 0-5VDC RESISTOR 38.3K OHM 165LBS - 48IN X 40IN X 34IN

[AGILENT E6198A] SWITCH/LOAD UNIT SLU CHASSIS FOR TS-5400 BAD FAN - PARTS - MANUFACTURER: AGILENT MODEL: E6198-81000 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS MAINFRAME IS IN FAIR COSMETIC CONDITION, WITH SCUFFS/SCRATCHES/RESIDUES FROM PRIOR USE. THE TOP IS HEAVILY DENTED-IN. MANY OF THE RED CLIPS FOR THE CARD-HOLDING RAILS ARE BROKEN, TO THE POINT THAT SEVERAL OF THE RAILS POP RIGHT OUT AS SHOWN. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SLU IS IN PARTIAL WORKING CONDITION. THE FAN THAT BLOWS ON THE INTERNAL POWER SUPPLY DOES NOT RUN. THE POWER SUPPLY RAIL INDICATORS ALL LIGHT UP. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT E6198A SLU CHASSIS SPECIFICATIONS: MANUFACTURER: AGILENT TECHNOLOGIES MODEL: E6198A (E6198-81000) SWITCH/LOAD UNIT 21-SLOT VXI CHASSIS FOR PIN MATRIX AND LOAD CARDS INTERNAL PCBS: E6170-66502 SLU BACKPLANE FORMERLY INSTALLED IN A TS-5400 FUNCTIONAL TEST SYSTEM SKU: Y40D010 1D-02-01(1) 19LBS - 23IN X 23IN X 18IN

[NATIONAL INSTRUMENTS NI PXI-1031 OEM PXI CHASSIS 4-SLOTS S/N: 196848B-01] MANUFACTURER: NATIONAL INSTRUMENTS NI MODEL: PXI-1031 OEM PXI CHASSIS MAINFRAME WITH BACKPLANE AND POWER SUPPLY P/N: 196848B-01 4 SLOTS POWER: 100-240VAC 50/60HZ 4-2A

[ABB 264PRMSRRRA1] ABB 264PRMSRRRA1 2600T SERIES PRESSURE TRANSMITTER. INCLUDES (1) 3" DIAPHRAGM SENSOR AND (1) PRESSURE TRANSDUCER 2606115520. SPECIFICATIONS: MANUFACTURER: ABB, MODEL: 264PRMSRRRA1, PRESSURE TRANSMITTER 2600T SERIES, OVP 2320 PSI, SPAN LIMITS 1.45/87 PSI, URL 87 PSI, OUTPUT SIGNAL: 4/20 MA + HART, LRL: 0.5 MMHG, POWER SUPPLY: 10.5 TO 42 VDC. PRESSURE TRANSDUCER 2606115520: FILL FLUID: SILICONE OIL, DIAPHRAGM MATERIAL: AISI 316L, URL: 600 KPA. DIAPHRAGM SENSOR: 3" DIAMETER. ITEM MAY HAVE MINOR SCUFFS AND SCRAPES DUE TO PREVIOUS USE. ITEM WAS TAKEN FROM THE SPARES OF A CLOSED FACILITY. NO TESTING WAS PERFORMED AFTER REMOVAL. SKU: R51E020 2F-05-04(1). 13LBS - 16IN X 16IN X 9IN.

[ERLAB MF4AS] AS CARBON ORGANIC FILTER FOR CAPTAIR FILTAIR FUME HOOD. MANUFACTURER: ERLAB, MODEL: Z5MF4AS. THIS ITEM IS IN NEW AND UNUSED CONDITION. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ERLAB Z5MF4AS AS CARBON ORGANIC FILTER FOR CAPTAIR FILTAIR FUME HOOD. SPECIFICATIONS: MANUFACTURER: ERLAB, MODEL: MF4AS, PART #: Z5MF4AS, DESCRIPTION: FILTER FOR ERLAB FILTAIR FUME HOOD, TYPE: AS ORGANIC CARBON, FITS ERLAB MODELS OF FUME HOODS. SKU: X43G010. 29LBS - 36IN X 25IN X 10IN

[NORDSON] HP7X HIGH-PRESSURE DISPENSING TOOL 700PSI (48.2 BAR) 7:1 RATIO ALUMINUM SPECIFICATIONS: MANUFACTURER: NORDSON MODEL: HP7X DESCRIPTION: HIGH-PRESSURE DISPENSING TOOL 700PSI FROM 100 PSI AIR DISPENSER UNIT

[USED] DENVER INSTRUMENT P-8002D.1 DIGITAL 800G/8000G X 0.01G/0.1G ANALYTICAL BALANCE SCALE 115V. THIS BALANCE SCALE IS IN GOOD/FAIR COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM REGULAR COMMERCIAL USE. IT WAS LAST CALIBRATED ON 6/15/16. THE TOP ENCLOSURE IS BROKEN AND MISSING A SMALL PIECE ON THE FRONT OF THE BALANCE THAT DOES NOT SEEM TO AFFECT THE FUNCTIONALITY OF THE BALANCE OR THE INTEGRITY OF THE ENCLOSURE (SEE PHOTO). WE HAVE GIVEN THIS SCALE A QUICK CLEAN WITH NORMAL HOUSEHOLD CLEANERS, BUT SOME GRIME AND STAINS COULD NOT BE REMOVED. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE LEVELED THE BALANCE BY ADJUSTING THE FEET AND APPLIED POWER TO OBSERVE THE LED DISPLAY WHICH WAS BRIGHT AND CLEAR. WE NAVIGATED THE MENU USING THE CONTROL BUTTONS AND THE SCALE WAS RESPONSIVE AS DESIGNED. WE SET THE SCALE TO AUTO-ZERO, BUT THE SCALE READ -0.0032OZ WITH NO WEIGHT APPLIED. WE PLACED AN 8 OZ TEST WEIGHT (NOT INCLUDED) ON THE SCALE AND THE BALANCE READ 7.9885. SO, THE SCALE ACCURATELY WEIGHS THE TEST WEIGHT BUT THE ZERO FUNCTION IS SLIGHTLY OFF. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) DENVER INSTRUMENT P-8002D.1 DIGITAL ANALYTICAL BALANCE SCALE DUAL RANGE SPECIFICATIONS: MANUFACTURER: DENVER INSTRUMENT MODEL: P-8002D.1 DESCRIPTION: DIGITAL ANALYTICAL BALANCE SCALE DUAL RANGE 800/8000G X 0.01/0.1G CAPACITY (G): 8000G READABILITY (G): 0.1 REPEATABILITY (G): 0.1 LINEARITY (G): 0.2 WEIGHING UNITS: G, KG, OZ, OZ T, LB, GN, CT, DRAM, DWT, MOMME, TAEL, TOLA, BAHT, AND CUSTOM WEIGHING MODE CALIBRATION TYPE: EXTERNAL POWER 115VAC SKU: Y10H002 1D-11-04(1) 13LBS - 18IN X 12IN X 12IN