Electronic Lab Test Measurement Equipment Day 1 of 3 day event

[COHERENT VPCOSMETIC VERSAPULSE VPC HELP-G MEDICAL COSMETIC LASER NO POWER -PARTS] MANUFACTURER: COHERENT MODEL: VPC HELP-G CONDITION: FOR PARTS OR NOT WORKING. THIS SYSTEM IS VISIBLY INCOMPLETE, MISSING THE OUTPUT WAND/ARM. THERE IS NO DISPLAY OR MOUNT FOR THE DISPLAY. THE SOFT PAD IS MISSING FROM THE BOTTOM/FRONT OF THE FRONT COVER. WE DO NOT HAVE A KEY FOR THE SWITCH. THE BLACK COVER ON THE OPTICAL SECTION HAS ONE SCREW HOLDING IT IN PLACE; THE SIDE COVERS HAVE TWO SCREWS EACH AND THE TOP COVER IS LOOSE (SEVERAL ARE MISSING). THE OUTER COVERS ARE SCUFFED/SCRATCHED. THE WATER FILTER LOOKS CLEAN. INSIDE, ONE OF THE BROWN POWER RESISTORS IS VISIBLY HEAT-DAMAGED AND HAS A FOUL SMELL. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SYSTEM IS NOT WORKING. NOTHING HAPPENS WHEN THE POWER SWITCH IS SWITCHED ON. WHEN THE KEY SWITCH WAS OPERATED, NOTHING HAPPENED. WE ARE NOT SURE WHAT MAY BE WRONG WITH THIS UNIT. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) COHERENT VPC HELP-G LASER SYSTEM SPECIFICATIONS: MANUFACTURER: COHERENT MODEL: VPC HELP-G VPCOSMETIC VERSAPULSE LASER SYSTEM VISIBLE SUBSYSTEM MODEL NUMBERS: LYTRON TF6938G2 0619-397-01 WATER COOLER COHERENT 0633-167-01 POWER SUPPLY(?) TRUTECH LASER BRICK R635-094-01 POWER REQUIREMENT: 200-240V 50/60HZ 15A 1PHASE NOT WORKING! PLEASE READ TEST NOTES! SKU: T50D001 5A-08-01(1) 460LBS - 48IN X 40IN X 50IN

[VALHALLA SCIENTIFIC 4314A IGNITER TESTER] DIGITAL IGNITER TESTER FOUR RANGES: 20 15MA 200 1.5MA 2000 150A 20,000 15A REQUIRES A SEPARATE POWER SUPPLY, NOT INCLUDED. SKU: Q14D007 1D-18-03(1) 6LBS - 12IN X 12IN X 8IN

[DENTSPLY C020200] CRESCENT WIG-L-BUG DENTAL MIXER AMALGAMATOR MSD SHAKER WHIP 110VAC 1.2A 60HZ. THIS SHAKER IS IN GOOD COSMETIC CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM REGULAR INDUSTRIAL USE AND COMES IN NON-ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE POWERED ON THIS SHAKER AND OBSERVED THE LED AND INDICATOR LIGHTS TURN ON. WHEN THE GREED BUTTON WAS PUSHED WE OBSERVED THE SHAKER VIBRATE AT SPEED BACK AND FORTH. THE SPEED COULD BE ADJUSTED BETWEEN 48 ON THE HIGH END AND 38 ON THE LOW END AND THE SHAKER COULD BE OBSERVED TO SPEED UP AND SLOW DOWN ACCORDINGLY. ADDITIONALLY, THE TIMER COULD BE ADJUSTED BETWEEN 1-30 SECONDS AND THE SHAKER WOULD STOP WHEN THE TIMER RAN OUT. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) DENTSPLY C020200 CRESCENT WIG-L-BUG DENTAL MIXER AMALGAMATOR MSD SHAKER WHIP SPECIFICATIONS: MANUFACTURER: DENTSPLY MODEL: C020200 DESCRIPTION: CRESCENT WIG-L-BUG DENTAL MIXER AMALGAMATOR MSD SHAKER WHIP 110VAC 1.2A 60HZ SKU: Y09H014 1B-05-02(1) 10LBS - 14IN X 9IN X 12IN

[FISHER ROSEMOUNT] TEMPERATURE SENSOR PROBE TE-300 NEMA 4X - MANUFACTURER: FISHER ROSEMOUNT MODEL: 68-N21A30A030T24E5 CONDITION: NEW OTHER. ITEM COMES IN ORIGINAL PACKAGING. PACKAGING SHOWS SIGNS OF SHELFWEAR. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) FISHER ROSEMOUNT 68-N21A30A030T24E5 TEMPERATURE SENSOR PROBE TE-300 NEMA 4X SPECIFICATIONS: MANUFACTURER: FISHER ROSEMOUNT MODEL: 68-N21A30A030T24E5 TYPE: TEMPERATURE SENSOR PROBE TYPE J 316 SS SINGLE ELEMENT 4-WIRE TE-300 IRON/CONSTANTAN 0 TO 760 C 32 TO 1400 F -/+ 1.1 C OR -/+ 0.4% EXPLOSION PROOF: CASS I DUST IGNITION PROOF: CLASS II & III MAX. AMBIENT TEMPERATURE: 245 C NEMA 4X SKU: N44Y031 1D-13-04(2) 4LBS - 48IN X 8IN X 8IN

[SONY UP-5100] MEDICAL DIGITAL COLOR VIDEO PRINTER 100-120V 50/60HZ - FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THE PRINTER IS IN HEAVILY USED, VINTAGE CONDITION WITH SCUFFS, SCRATCHES, AND MARKINGS FROM PREVIOUS USE. THE PRINTER WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. THE PRINTER DID NOT POWER ON WHEN POWER WAS APPLIED, THEREFORE THE UNIT IS BEING SOLD AS/IS FOR PARTS OR REPAIR. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AS/IS SONY UP-5100 MEDICAL DIGITAL COLOR VIDEO PRINTER 100-120V 50/60HZ SPECIFICATIONS: MANUFACTURER: SONY MODEL: UP-5100 DIGITAL COLOR VIDEO PRINTER VOLTAGE: 100-120 VAC 50/60 HZ (3)BNC I/O WITH SYNC CHANNELS DIMENSIONS: 19.5" X 16.75" X 7", 7.5"H WITH FEET CONNECTIONS: 20-PIN SERIAL, BNC I/O, RS-232C CURRENT RATING: 3.5A PRINTER, 2.5A RECEPTACLE INCLUDES RIBBON ROLL

NEW GDS CORP. GASMAX TOXIC & COMBUSTIBLE PROCESS GAS MONITOR/CONTROLLER - MANUFACTURER: GDS CORPORATION MODEL: GASMAX CONDITION: NEW. COMES IN BULK SEALED PACKAGING. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) GDS CORP. GASMAX TOXIC/COMBUSTIBLE GAS MONITOR SPECIFICATIONS: MANUFACTURER: GDS CORPORATION MODEL: GASMAX AMAT PART #: 0190-40541 DESCRIPTION: TOXIC & COMBUSTIBLE GAS MONITOR/DETECTOR WEIGHT: 4.00 LBS. CONDITION: NEW QUANTITY: 1 SKU: N44P012 1D-03-03(3) 7LBS - 12IN X 12IN X 12IN

HAMILTON 36760 HVXM 6-5 DISTRIBUTION FLOW PATH 6-PORT VALVE. MANUFACTURER: HAMILTON MODEL: 36760 HVXM 6-5 DESCRIPTION: DISTRIBUTION FLOW PATH 6-PORT VALVE ALUMINUM PTFE/CTFE NOMINAL PORT DIAMETER: 0.059" (1.5 MM) VALVE OUTER BODY DIMENSION: 1" (25.4MM) TOTAL DEAD VOLUME: 27.2 MODULAR VALVE POSITIONER THREAD DEPTH: 0.219" (5.6 MM) THREAD CONNECTION: 1/4-28 SKU: V26H017 1A-04-05-02(3)

[LEICA POLYLITE 88] INSPECTION MICROSCOPE W/ ILLUMINATOR AND 6 OBJECTIVES - MANUFACTURER: LEICA MODEL: POLYLITE 88 CONDITION: USED. THIS MICROSCOPE IS IN FAIR COSMETIC CONDITION. IT LOOKS NICE FROM A DISTANCE, BUT UP CLOSE YOU WILL FIND BOTH LIGHT AND HEAVY SCRATCHES IN THE STAGE, SOME SCUFFS/SCRATCHES IN THE BASE, ON THE EYETUBES, AND SOME HEAVY SCRATCHES NEAR THE CONNECTORS ON THE BOTTOM/BACK CORNER OF THE FRAME. ONE OF THE EYEPIECES HAS ITS TOP TRIM RING MISSING. THE STAGE IS A LITTLE LOOSE, AND CAN BE WIGGLED UP AND DOWN WITH FINGERTIP PRESSURE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: PLEASE READ: THIS MICROSCOPE IS IN PARTIAL WORKING CONDITION, WITH A FEW NOTABLE PROBLEMS. IT IS USABLE AS A MICROSCOPE; THE OPTICS GIVE A NICE CRISP VIEW. THE MOTORIZED OBJECTIVE CHANGER WORKS. THE ILLUMINATOR WORKS. THE EYETUBES HOLD THEMSELVES AT A SET ANGLE. THE APERTURE DIAPHRAGM WORKS. THE FIELD DIAPHRAGM BELT IS MISSING SOME TEETH, SO WHEN THE DIAPHRAGM IS SET TO LESS THAN ABOUT 13% THE FIELD DIAMETER, THE BELT SKIPS INSTEAD OF TOTALLY CLOSING THE IRIS, AND MAKES A CLICKING NOISE UNTIL THE FD IS SET TO A LARGER DIAMETER. THE AUTOMATIC FD SETTING WILL CAUSE THIS ERROR WHEN CHANGING OBJECTIVES. THE DIAPHRAGM OPENING IS ALSO OFFSET, SO THE BRIGHT FIELD IS OFF TO THE TOP RIGHT SIDE OF THE VIEW. THE SOFTWARE DOWNLOAD FROM TELEDYNE LUMENERA REQUIRES AN ACCOUNT WITH THE MANUFACTURER, WHICH WE DON'T HAVE, SO WE WERE UNABLE TO TEST THE CAMERA. THE PICTURES OF A SEMICONDUCTOR WAFER SHOWN IN PHOTO #7 WERE TAKEN THROUGH AN EYEPIECE WITH A MOBILE PHONE CAMERA. WE INSTALLED A NEW BULB IN THE ILLUMINATOR. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) LEICA POLYLITE 88 COMPOUND MICROSCOPE 302303 (1) REICHERT 5X OBJECTIVE (1) REICHERT 10X OBJECTIVE (1) REICHERT 20X OBJECTIVE (1) REICHERT 50X OBJECTIVE (1) REICHERT 100X OBJECTIVE (1) REICHERT 150X OBJECTIVE SPECIFICATIONS: MANUFACTURER: LEICA MODEL: REICHERT POLYLITE 88 COMPOUND MICROSCOPE TYPE 302303 TRINOCULAR WITH CAMERA PORT BRIGHT OR DARKFIELD VERTICAL ILLUMINATION MOTORIZED ILLUMINATOR CONTROLS NO PROVISION FOR UNDERSTAGE ILLUMINATOR MOTORIZED 6-PLACE OBJECTIVE LENS TURRET MANUAL X/Y/Z STAGE WITH HOLE FOR APPROXIMATELY 6.5" SQUARE REMOVABLE STAGE PLATE ADJUSTABLE TILTING EYETUBES ADJUSTABLE INTERPUPILLARY DISTANCE DUAL DIOPTER ADJUSTMENTS NONE/ND/GREEN FILTER SLIDER HOLE FOR POLARIZATION SLIDER IN HEAD (POL ANALYZER IS NOT INCLUDED) POWER: 100-240V 47-63HZ 100W OPTICS: WPK 10X EYEPIECES SELECTABLE 1X/2X MAGNIFICATION IN THE HEAD OBJECTIVE LENSES ARE ALMOST ALL BRIGHTFIELD/DARKFIELD EXCEPT 150X PLAN FLUOR LWD 5X/0.10 EPI /0 PLAN FLUOR LWD 10X/0.20 EPI /0 IK PLAN FLUOR XLWD 20X/0.04 EPI /0 IK PLAN FLUOR 50X/0.80 EPI IK /0 PLAN FLUOR 100X/0.90 EPI IK /0 PLAN APO 150X/0.95 IK /0 (BRIGHTFIELD ONLY) SKU: Y30D001 3A-02-01(1) 160LBS - 40IN X 32IN X 33IN

[ZEISS AXIOTRON 8X8] CARL ZEISS AXIOTRON TRINOCULAR COMPOUND INSPECTION MICROSCOPE WITH OPTICS -PARTS - MANUFACTURER: ZEISS MODEL: AXIOTRON 8X8 CONDITION: FOR PARTS OR NOT WORKING. THIS MICROSCOPE IS IN FAIR COSMETIC CONDITION. THERE ARE SOME SCUFFS AND SCRATCHES IN THE PAINT, ESPECIALLY AROUND THE BOTTOM OF THE BASE. THERE IS A CRACK IN THE GLASS OF THE VACUUM CHUCK. THE OPTICAL FIBER FOR THE ARC LAMP IS BADLY KINKED. LOOKING THROUGH THE EYEPIECES, THERE IS A SMALL AMOUNT OF DUST OR OTHER PARTICLES THAT ARE SOMEWHERE DEEP IN THE MIDDLE OF THE LIGHT PATH. ONE OF THE EYEPIECES HAS A BUBBLE OR SOMETHING IN THE GLASS THAT CAN'T BE SEEN LOOKING THROUGH WHEN THE EYEPIECE IS DISMOUNTED, BUT SHOWS STRONGLY IN THE VIEW THROUGH THE SCOPE AS A SMALL DARK CIRCLE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS MICROSCOPE IS IN PARTIAL WORKING CONDITION. THE NORAN PART DOES SPIN ITS DISK FULL OF HOLES, BUT IT MAKES NOISE AT ALL SPEEDS, BUT MAKES AN UNHEALTHY CLICKING NOISE AT HIGHER SPEEDS. THE MANUAL FOCUS PART OF THE BASE SLIPS, AND FOCUS CANNOT BE MAINTAINED WITHOUT CONSTANT USER INTERVENTION. THE XY CONTROLS ON THE STALK UNDER THE STAGE BOTH HAVE CONSIDERABLE BACKLASH AT THE KNOBS, AND OPERATION IS CLUNKY AT BEST. THE EYETUBE ANGLE ADJUSTMENT WORKS, BUT ONLY MOSTLY-HOLDS ITSELF UP. SOMETIMES, EVEN IF ONLY SLIGHTLY BUMPED, THE EYETUBES WILL FALL DOWN. THE ARC LAMP EMITS A BRIGHT WHITE LIGHT, BUT THE OPTICAL FIBER IS DAMAGED AND ONLY EMITS A DIM ORANGE LIGHT AT THE END. THERE ARE CONTROLS FOR AUTOFOCUS ON THE CONTROL PANEL, BUT THESE DO NOTHING AS FAR AS WE CAN TELL. THE GOOD NEWS IS, THE HALOGEN ILLUMINATOR WORKS WELL. THE MANUAL APERTURE CONTROL WORKS. THE POLARIZATION ANALYZER WORKS. THE MOTORIZED OBJECTIVE CHANGER WORKS. THE H AND D SELECTION ON THE CONTROL PANEL WORKS. THE LAMP BRIGHTNESS CONTROL WORKS. THE VIEW THROUGH THE SCOPE IS BRIGHT AND CLEAR, AND THE DUST IN THE OPTICS IS NOT A MAJOR DISTRACTION IN USE. THE FOUR OBJECTIVE LENSES WITH RETRACTING END PIECES ALL RETRACT SMOOTHLY AND RE-EXTEND ON THEIR OWN. THE ARC LAMP POWER SUPPLY SHOWS 424.1 WHEN "TIME" IS SELECTED. DUE TO THE FOCUS AND LIGHTING PROBLEMS, WE ARE OFFERING THIS MICROSCOPE FOR SALE AS-IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ZEISS 45 28 25 AXIOTRON 8X8 MICROSCOPE BASE WITH MEG SYSTEM (1) ZEISS 45 29 30 TRINOCULAR CAMERA ADAPTER (1) ZEISS 45 36 60 ROTATABLE POLARIZING ANALYZER SLIDER (1) ZEISS 45 28 56 HD LIGHT TRAIN MODULE (1) ZEISS 45 29 95 C-MOUNT CAMERA ADAPTER (1) ZEISS 44 40 35 PL 10X/25 F EYEPIECE (1) ZEISS 44 40 34 PL 10X/25 EYEPIECE (1) ZEISS 44 23 24 EPIPLAN-NEOFLUAR 5X/0.15 HD /0 OBJECTIVE LENS (1) ZEISS 44 23 44 EPIPLAN-NEOFLUAR 20X/0.50 HD /0 EOBJECTIVE LENS (1) ZEISS 44 23 54 EPIPLAN-NEOFLUAR 50X/0.75 HD /0 OBJECTIVE LENS (1) ZEISS 44 23 84 EPIPLAN-NEOFLUAR 100X/0.90 HD /0 OBJECTIVE LENS (1) ZEISS 44 26 90 EPIPLAN-APOCHROMAT 150X/0.95 /0 OBJECTIVE LENS (1) ZEISS 44 72 18 12V 100W LAMPHOUSE (1) ZEISS 44 72 16 LAMPHOUSE (1) ZEISS 44 80 12 XBO75W/2 MODULE (1) LEP 990031 UNIVERSAL ARC LAMP POWER SUPPLY (1) NORAN INSTRUMENTS 700P125995 SERIES CSM-602 SCANNING MODULE (1) NIDEK CO. IM11-MS21 STAGE SPECIFICATIONS: MANUFACTURER: CARL ZEISS AXIOTRON 8 X 8 INSPECTION MICROSCOPE WITH VACUUM CHUCK, SUITABLE FOR USE WITH 6" WAFERS COMPLETE SET OF ZEISS OPTICS POLARIZED LIGHT ANALYZER SLIDER HALOGEN 100W LIGHTING POWER: 115/230V 50...60HZ 250VA SKU: W41D006 3B-05-01(1) 195LBS - 48IN X 40IN X 40IN

LEICA SZ4 STEREOZOOM 4 MICROSCOPE W/ BOOM STAND & FIBER LIGHT - MANUFACTURER: LEICA MODEL: SZ4 CONDITION: REFURBISHED BY SELLER. THIS REFURBISHED LEICA SZ4 STEREOZOOM MICROSCOPE SYSTEM (SEE INCLUDED LIST) IS IN USED/REFURBISHED CONDITION WITH COSMETIC SCUFFS, SCRATCHES, AND SIGNS OF WEAR FROM NORMAL USE, BUT IS IN GOOD WORKING CONDITION AND OVERALL GOOD PHYSICAL CONDITION (THERE ARE A FEW PAINT CHIPS ON THE BOOM BASE AND SCRATCHES ON THE SCOPE HEAD, BUT THEY ARE COSMETIC ONLY). ALL OF THE MICROSCOPE'S OPTICS HAVE BEEN PROPERLY CLEANED AND ALL INTERNAL MOVING PARTS HAVE BEEN CLEANED AND LUBRICATED. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE MICROSCOPE'S OPTICS, ZOOM CONTROLS, BOOM STAND/FOCUS MOUNT, AND FIBER OPTIC LIGHT HAVE BEEN TESTED THROUGH THEIR FULL RANGE, AND ARE IN GOOD WORKING CONDITION. THE LAST PHOTO SHOWS THE SCOPE'S ACTUAL MAGNIFICATION. THE PHOTOS SHOW THE ACTUAL ITEMS YOU WILL RECEIVE, EXCEPT FOR THE PENNY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) LEICA STEREOZOOM 4 MICROSCOPE (2) NEW STANDARD 10X/18MM WIDEFIELD EYEPIECES (1) E-ARM FOCUS MOUNT (1) 0.5X AUXILIARY OBJECTIVE (1) LUXO FIBER OPTIC ILLUMINATOR (FOI-150-UL) (1) LUXO FIBER OPTIC RING LIGHT (1) LEICA S-TYPE HEAVY BOOM STAND (1) LEICA BOOM STAND RING LOCK (1) POWER CORD SPECIFICATIONS: MANUFACTURER: LEICA (LEITZ WETZLAR) MODEL: STEREOZOOM 4 (SZ4) 10X STANDARD WIDEFIELD EYEPIECES HEAD OF FOCUS MOUNT CAN LOCK MICROSCOPE IN ALMOST ANY ORIENTATION ZOOM RATIO: 4.28:1 ZOOM RANGE: 0.7X - 3X ZOOM CONTROL: SINGLE, GRADUATED, TOP MOUNT DUAL DIOPTRIC ADJUSTMENT AUXILIARY OBJECTIVE: 0.5X INTERPUPILLARY DISTANCE: ADJUSTABLE (45MM - 75MM) BOOM BASE DIMENSIONS: 10" X 10" TOTAL WEIGHT WITH BOOM STAND: APPROX. 50 LBS. DOUG DEALS FACTOID: THE FIRST 35MM CAMERA WAS DESIGNED BY LEICA'S OSCAR BARNACK, AND WAS INTRODUCED TO THE PUBLIC IN 1925. THE LEICA WAS AN IMMEDIATE SUCCESS AND WAS RESPONSIBLE FOR POPULARIZING 35MM FILM PHOTOGRAPHY. THE NAME "LEICA" DEBATABLY STANDS FOR LABORATORY OF EXPERIMENTAL INTENSIVE CARE AND ANESTHESIOLOGY (UNIVERSITY OF AMSTERDAM). ALTHOUGH OTHER SOURCES CLAIM THE NAME IS DERIVED FROM THE FIRST THREE LETTERS OF THE FOUNDER'S SURNAME (LEITZ) AND THE FIRST TWO LETTERS OF THE WORD CAMERA: LEI-CA. SKU: X40S007 3B-06-01(1) 58LBS - 25IN X 19IN X 16IN

[NEW] THERMO SCIENTIFIC 3453 2.0ML SNAP CAP MICROCENTRIFUGE TUBES (2500) - MANUFACTURER: THERMO SCIENTIFIC MODEL: 3453 CONDITION: NEW. COMES IN ORIGINAL PACKAGING. THESE MICROCENTRIFUGE TUBES ARE NEW AND UNOPENED AND COME SEALED IN THEIR ORIGINAL BAGS. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2500) THERMO SCIENTIFIC 3453 2.0ML SNAP CAP MICROCENTRIFUGE TUBES SPECIFICATIONS: MANUFACTURER: THERMO SCIENTIFIC MODEL: 3453 DESCRIPTION: 2.0ML GRADUATED, STERILE CAPACITY (METRIC): 2ML COLOR: NATURAL MATERIAL: POLYPROPYLENE MAX. FORCE: 25000XG PACKAGING: 50 TUBES/ BAG, 10 BAGS/ UNIT, 5 UNITS/ CASE TYPE: LOW RETENTION STERILITY: STERILE MAX. RCF 25,000 X G GRADUATED: YES SKU: W12G026

HAKKO T7/T15-1211 SOLDERING TIP FOR FM-202/FP-102 SPECIFICATIONS: PART #: T7/T15-1211 TIP SHAPE: SQUARE FOR IRONS: HAKKO FM-203-HANDPIECE : HAKKO FM-2027(70W) HAKKO FM-204-HANDPIECE : HAKKO FM-2027(70W) HAKKO FX-950-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-951-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-952-HANDPIECE : HAKKO FM-2028(70W) HAKKO FM-202-HANDPIECE : HAKKO FM-2021(70W) OR HANDPIECE : HAKKO FM-2027(70W) NOTE: THE T15 TIPS HAVE REPLACED THE T7 TIPS. THE ONLY DIFFERENCE IS HAKKO HAS PHASED OUT THE BARCODE FROM THE TIPS. SEE THE HAKKO PRODUCT BULLETIN.

[SCS SPEEDLINE] IONOGRAPH 500M-SP SMALL PARTS TEST MODULE - PARTS - MANUFACTURER: SPEEDLINE MODEL: IONOGRAPH 500M-SP CONDITION: FOR PARTS OR NOT WORKING. THIS UNIT IS IN FAIR COSMETIC CONDITION. THE PLASTICS ARE OLD AND BRITTLE. THE TEST CELL IS CRACKED ON FRONT, THE OUTER CASE IS ALSO CRACKING, THE WORST ON THE LEFT SIDE. THERE ARE ALSO SCUFFS/SCRATCHES AND RESIDUES FROM PRIOR USE AND OLD ADHESIVE LABELS. THERE IS DUST FROM STORAGE IN THE NOOKS AND CRANNIES. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS UNIT POWERS ON AND GIVES THE SHOWN READOUT ON SCREEN. NO OTHER TESTING WAS DONE. THIS IS BEING SOLD AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) SCS IONOGRAPH 500M-SP TEST CELL (1) OPERATOR'S MANUAL SPECIFICATIONS: MANUFACTURER: SPECIALTY COATING SYSTEMS (SPEEDLINE TECHNOLOGIES, COOKSON ELECTRONICS) MODEL: IONOGRAPH 500M-SP IONIC CONTAMINATION TEST SYSTEM SMALL PARTS TEST MODULE COMPACT 6" X 6" 0.75 GALLON TEST CELL REQUIRES A CONTROLLER, NOT INCLUDED POWER: 115V 60HZ 2.5A PUMP MOTOR: A.O. SMITH MODEL JB1S056N SERNO 01624 PUMP: MARCH BC-3C-MD SKU: W35D013 5G-15-01(1) 140LBS - 48IN X 40IN X 40IN

SUPELCO MILLIPORESIGMA 27343 22ML PRE-CLEANED CLEAR GLASS VIALS CLOSURE COLOR: BLACK GLASS COLOR: CLEAR MATERIAL: GLASS SEPTUM: PTFE, SILICONE CLOSURE MATERIAL: POLYPROPYLENE CLOSURE TYPE: OPEN TOP CAP CERTIFICATION: PRE-CLEANED ACCORDING TO US EPA PROTOCOL B INNER DIAMETER: 13 MM OUTER DIAMETER: 23 MM VOLUME: 22 ML THICKNESS: 0.060" HEIGHT: 85 MM

[STARRETT] STARRETT BLACK GRANITE SURFACE PLATE W/ LEG MOUNTS/SPACERS LABORATORY GRADE N/A. MANUFACTURER: STARRETT MODEL: 4000-5240-01 DESCRIPTION: GRANITE SURFACE PLATE BLACK GRANITE GRADE N/A TOTAL LENGTH: 66" TOTAL WIDTH: 35.5" TOTAL THICKNESS: 10" LIP THICKNESS: 7.75" W/ ANGLE CUT BACK TO PLATE AT BOTTOM (4) INDUSTRIAL ADJUSTABLE METAL SPACERS (4) INDUSTRIAL BLACK ANODIZED ALUMINUM LEG MOUNTS (ATTACHED W/ BOLTED HARDWARE) TOP (28) M6 - 1.0 THREADED MOUNTING HOLES (18) IN THE RECESSION (16) M7 - 1.0 THREADED MOUNTING HOLES FRONT LONG SIDE (2) 2" DIAMETER 6" DEEP NON THREADED HOLES (2) M6 - 1.0 THREADED MOUNTING HOLES BACK LONG SIDE (2) 2" DIAMETER 6" DEEP NON THREADED HOLES (2) M6 - 1.0 THREADED MOUNTING HOLES

NEW HAKKO T7/T15-BCS12 SOLDERING TIP FOR FM-202/FP-102 SPECIFICATIONS: PART #: T7/T15-BCS12 TIP SHAPE: 1.2BCS FOR IRONS: HAKKO FM-203-HANDPIECE : HAKKO FM-2027(70W) HAKKO FM-204-HANDPIECE : HAKKO FM-2027(70W) HAKKO FX-950-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-951-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-952-HANDPIECE : HAKKO FM-2028(70W) HAKKO FM-202-HANDPIECE : HAKKO FM-2021(70W) OR HANDPIECE : HAKKO FM-2027(70W) NOTE: THE T15 TIPS HAVE REPLACED THE T7 TIPS. THE ONLY DIFFERENCE IS HAKKO HAS PHASED OUT THE BARCODE FROM THE TIPS. SEE THE?HAKKO PRODUCT BULLETIN. SKU: EBK38E009 1B-02-02(41) 0LBS - 6IN X 4IN X 6IN

[K&L MICROWAVE 8B120-850/X500-O] BANDPASS FILTER SMA TUBULAR FIXED. CENTER FREQUENCY: 850 MHZ BANDWIDTH: 500 MHZ PASS BAND: 600 ... 1100 MHZ SMA (F) CONNECTORS 1/2" DIAMETER VSWR: 1.5:1 AVERAGE POWER: 18 WATTS 50 OHMS 8 SECTIONS. FAIR COSMETIC CONDITION WITH MINOR SCUFFS/SCRATCHES FROM PRIOR USE. GOOD WORKING CONDITION.

[TEKPOWER] TP3010D 0-30V 0-10A LINEAR REGULATED ADJUSTABLE POWER SUPPLY DIGITAL - MANUFACTURER: TEKPOWER MODEL: TP3010D OUTPUT: 030 VDC, 010 AMPS DIGITAL VOLTAGE AND CURRENT METERS 10-TURN VOLTAGE CONTROL 3/4-TURN CURRENT LIMIT FRONT PANEL BINDING POST CONNECTIONS WITH BANANA JACKS LOAD ON/OFF SWITCH WITH OUTPUT-ENABLED INDICATION CC OR CV MODE, AUTOMATIC CHANGEOVER TEMPERATURE-CONTROLLED FAN COOLING

[6] VWR SCIENTIFIC FRIO-TEMP DIGITAL THERMOMETERS 82007-984 FOR PARTS - MANUFACTURER: VWR SCIENTIFIC MODEL: 82007-984 RANGE: -50 TO +200OC REQUIRES REMOVABLE PROBE, NOT INCLUDED. THESE ARE IN FAIR TO GOOD COSMETIC CONDITION WITH MINOR RESIDUES/SCUFFS/SCRATCHES FROM PRIOR USE. SOME HAVE VELCRO, TAPE, OR STICK-ON MAGNETS TO REPLACE OR SUPPLEMENT THE BUILT-IN MAGNET. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). THESE ARE IN AT-LEAST-PARTIAL WORKING CONDITION. WHEN A "AAA" BATTERY IS INSTALLED, THE DISPLAY COMES ON AND SAYS "LLL". WE THINK BUT ARE NOT SURE THIS IS BECAUSE THERE IS NO PROBE ATTACHED. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (6) VWR 82007-984 THERMOMETERS SPECIFICATIONS: MANUFACTURER: VWR SCIENTIFIC MODEL: 82007-984 FRIO-TEMP DIGITAL THERMOMETER RANGE: -50 TO +200OC REQUIRES REMOVABLE PROBE, NOT INCLUDED SKU: P05D008 1D-17-03(3) 3LBS - 8IN X 8IN X 7IN

[TMC VIBRATION CONTROL] 14-426-34 GIMBAL PISTON PNEUMATIC VIBRATION ISOLATION SUPPORT LEGS (3) - MANUFACTURER: TMC VIBRATION CONTROL MODEL: 14-426-34 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS ITEM IS IN FAIR COSMETIC CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM REGULAR USE AND ONE BRACKET THAT HOLDS A DIAL IS BENT. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS ITEM WAS PULLED FROM A WORKING ENVIRONMENT AND NO TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (3) TMC 14-426-34 GIMBAL PISTON PNEUMATIC VIBRATION ISOLATION SUPPORT LEGS SPECIFICATIONS: MANUFACTURER: TMC VIBRATION CONTROL MODEL: 794-651-02R DESCRIPTION: VIBRATION ISOLATION SUPPORT LEGS OPERATION: PNEUMATIC GIMBAL PISTON DIMENSIONS: HEIGHT: 24.5" WIDTH: 6.5" LENGTH: 6.5"

[ANRITSU MD8480C] SIGNALLING TESTER W-CDMA WIRELESS TEST SET WITH 8 PLUG-IN CARDS. MANUFACTURER: ANRITSU CORPORATION. MODEL: MD8480C. W-CDMA SIGNALING TESTER. INSTALLED CARDS: MU848073C TIMING GENERATOR, (3) MU848072C1 BTS UNIT, MU848077C BASEBAND INTERFACE, MU848071C L2, MU848056A VOICE CODEC, MU848051A CPU. INSTALLED SOFTWARE (ACCORDING TO THE LABELS): MU848001C, MU848002C.

[OLYMPUS NDT] BONDMASTER 1000+ BOND TESTING FLAW DETECTOR POWERS ON - PARTS. MANUFACTURER: OLYMPUS MODEL: BONDMASTER 1000+ CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS ITEM IS IN FAIR COSMETIC CONDITION WITH SCUFFS/SCRATCHES/RESIDUES FROM PRIOR USE, INCLUDING SCRATCHES DIRECTLY ON THE SCREEN. THE CASE ON THE TOP/RIGHT CORNER OF THE DISPLAY MODULE HAS A BIG CRACK, AS SHOWN IN THE SECOND PHOTO. THERE ARE WHITE DOTS IN THE DISPLAY, POSSIBLY DIRT - THESE ARE NOT SCRATCHES OUTSIDE, THEY ARE INTERNAL TO THE DISPLAY. THERE IS SOME VISIBLE CORROSION ON THE SCREW HEADS. WHEN THE UNIT IS SHAKEN, A SMALL RATTLING NOISE CAN BE HEARD INSIDE. THE BATTERY DOOR IS MISSING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SYSTEM IS IN PARTIAL WORKING CONDITION. WHEN A BATTERY IS INSTALLED (NO BATTERY IS INCLUDED IN THIS SALE), THE SYSTEM BOOTS UP AND PASSES ALL ITS SELF-TESTS. THE FIRST TIME WE POWERED IT ON IT GAVE AN ERROR FOR THE MEMORY TEST BUT SUBSEQUENT POWER-ON TESTS PASSED AS SHOWN. EVENTUALLY, IT SHOWS A "NO PROBE CONNECTED" SCREEN AND WILL NOT DO ANYTHING BUT BEEP WHEN A BUTTON IS PRESSED. PRESSING ANY BUTTON EXCEPT THE POWER BUTTON CAUSES THE SYSTEM TO BEEP ONCE, AND PRESSING THE POWER BUTTON SWITCHES IT OFF. IT WILL NOT DO ANYTHING ELSE. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) OLYMPUS BONDMASTER 1000+ SPECIFICATIONS: MANUFACTURER: OLYMPUS NDT MODEL: BONDMASTER 1000+ P/N: 9020289.01 BOND FLAW DETECTOR REQUIRES PROBES FOR OPERATION, NOT INCLUDED! DOES NOT RESPOND TO BUTTON PRESSES, SOLD AS-IS! SKU: X34D011 1D-04-01(1) 5LBS - 12IN X 12IN X 9IN

[NEW] WEARWELL 095.18X36BL BLUE CLEANROOM MATS 18"X36" 30 SHEETS/MAT (3). MANUFACTURER: WEARWELL. MODEL: 095.18X36BL. CONDITION: NEW. COMES IN ORIGINAL PACKAGING. THE MATS HAVE BEEN REMOVED FROM THE ORIGINAL PACKAGING FOR PHOTO AND INSPECTION PURPOSES. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (3) NEW WEARWELL 095.18X36BL BLUE CLEANROOM MATS 18"X36" 30 SHEETS/MAT. SPECIFICATIONS: MANUFACTURER: WEARWELL. MODEL: 095.18X36BL. CLEAN ROOM MAT LENGTH: 36". WIDTH: 18". 30 SHEETS OF TOUGH FILM PER MAT EFFECTIVELY TRAPS IMPURITIES FROM SHOES FOR DIRT AND DUST CONTROL. COLOR: BLUE. COMPOSITION: POLYETHYLENE. RECYCLED CONTENT: <10%. FOR USE ON LOW-PILE CARPET, TILE, OR CONCRETE SURFACES. SUITABLE ENVIRONMENT: DRY. SKU: V27B007 2I-03-04(1). 11LBS - 41IN X 25IN X 5IN.

HEWLETT PACKARD 6624A SYSTEM DC POWER SUPPLY FOUR, 40 WATT OUTPUTS MAXIMUM OUTPUTS: CHANNELS 1 & 2: 7V 5A / 20V 2A CHANNELS 3 & 4: 20V 2A / 50V 0.8A TWO RANGES FOR EACH OUTPUT (0-7V AND 0-20V, 0-20V AND 0-50V) INDIVIDUALLY PROGRAMMABLE OUTPUTS REMOTE SENSE CAPABLE GPIB COMMUNICATIONS SIDE HANDLES ONLY (NO FEET) POWER INPUT REQUIREMENT: 100/120/220/240 50/60HZ THIS POWER SUPPLY IS IN FAIR COSMETIC CONDITION WITH LOTS OF MINOR SCUFFS/SCRATCHES/STAINS FROM PRIOR USE. THE BACKSPACE KEY IS TORN OUT OF THE KEYBOARD. THE POWER SWITCH IS UGLY BUT WORKS. THERE ARE A FEW DENTS OVER THE DISPLAY THAT DON'T PHOTOGRAPH WELL, AND DON'T REALLY INTERFERE WITH VIEWING THE SCREEN. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SUPPLY IS IN PARTIAL WORKING CONDITION. THE KEYBOARD HAS SOME KEYS THAT REQUIRE AN EXTRA-FIRM PRESS TO ACTUATE, TO THE POINT THAT WE THOUGHT THE ZERO AND ENTER KEYS DON'T WORK UNTIL WE RUB/MASHED THEM PRETTY HARD. SOME KEYS GIVE MULTIPLE INPUTS PER PRESS. WE TESTED ALL FOUR CHANNELS AND VERIFIED THEY WILL GIVE MAXIMUM RATED VOLTAGE AT NO LOAD. THE DISPLAY WORKS. THE FAN WORKS. WE ARE NOT ABLE TO TEST THE HP-IB INTERFACE. NO OTHER TESTING WAS DONE. THIS IS BEING SOLD AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 6624A SYSTEM DC POWER SUPPLY

(2) STAINLESS STEEL LABORATORY FREEZER RACKS (1) 23.5"H & (1)19.75"H - MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE RACKS ARE IN USED CONDITION WITH SCUFFS, SCRATCHES, AND HEAVY RUST OXIDATION FROM PREVIOUS USE AND STORAGE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE RACKS WERE REMOVED FROM DECOMMISSIONED ENVIRONMENTS. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) STAINLESS STEEL LABORATORY FREEZER RACKS (1) 23.5"H (1) 19.75"H SPECIFICATIONS: MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY MIXED LABORATORY FREEZER RACKS CONFIGURATION: (1) 11-SPACE, (1) 9-SPACE CONSTRUCTION: STAINLESS STEEL SINGLE AND DOUBLE HAND CONFIGURATIONS DESIGN: VERTICAL DIMENSIONS: (1) 19.75" X 5.5" X 5.5", (1) 23.5" X 5.5" X 5.5"

[AIRFLOW SYSTEMS] MINIVAC 66-1E EXTRACTOR SYSTEM -PARTS - MANUFACTURER: AIRFLOW SYSTEMS MODEL: MINIVAC 66-1E CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS MINIVAC SYSTEM HAS SOME MINOR SCUFFS, SCRATCHES, AND DINGS FROM NORMAL USE AND IS BEING SOLD AS-IS BECAUSE IT DOES NOT INCLUDE FILTERS AND THE HOSE SECTIONS OF THE EZ ARM NEED TO BE REPLACED. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS MINIVAC SYSTEM IS BEING SOLD AS-IS BECAUSE IT DOES NOT INCLUDE FILTERS AND THE HOSE SECTIONS OF THE EZ ARM NEED TO BE REPLACED. THE BLOWER WAS TESTED AND VERIFIED WORKING. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AIRFLOW SYSTEMS MINIVAC 66-1E EXTRACTOR SYSTEM MV66-2P95-1C66-XX1E E-Z ARM AS-IS SPECIFICATIONS: MANUFACTURER: AIRFLOW SYSTEMS MODEL: MINIVAC 66-1E PART NO: MV66-2P95-1C66-XX1E DESCRIPTION: INDUSTRIAL AIR CLEANER EXTRACTOR MOTOR HP: 1/2 RPM: 1625 PHASE: 1 VOLTAGE: 115VAC 60HZ 7.4A E-Z ARM EXTRACTOR DIAMETER: 2.5" AS-IS, FOR PARTS - NOT WORKING NO FILTERS INCLUDED SKU: X24U006 5K-07-01(1) 160LBS - 48IN X 40IN X 80IN

1993 RAM OPTICAL INSTRUMENTATION ROI OMIS II 12"X6"X6" XYZ MOTORIZED LINEAR TRANSLATION STAGE - PARTS. THIS STAGE IS IN FAIR COSMETIC CONDITION. THE GRANITE LOOKS GOOD WITH ONLY SOME ADHESIVE LABEL RESIDUES. THE GLASS STAGE PLATE HAS SOME HEAVY SCRATCHES. THE CABLE FOR THE VIDEO PROBE IS CUT, WITH VISIBLY-CUT WIRES, AND THERE IS NO CAMERA ON THE PROBE. THE LAST TIME THIS WAS POWERED ON WAS 2017. AT THAT TIME, IT TOOK SOME LUBRICATION OF THE LINEAR WAYS TO GET THE AXES TO MOVE RELUCTANTLY. THEY PROBABLY NEED SERVICE AGAIN. THE ILLUMINATOR WORKS WELL FROM ABOVE OR BELOW THE STAGE PLATE. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ROI 12-1000-11 OMIS II 6X12 STAGE (1) ROI OPTICAL VIDEO PROBE (1) ROI 30-2500-00 150 ILLUMINATOR (4) SOFT PLASTIC FEET (1) PLASTIC SLIP COVER SPECIFICATIONS: MANUFACTURER: RAM OPTICAL INSTRUMENTATION, INC. (ROI) ONLY THE BASE, STAGE, PROBE AND ILLUMINATOR FOR THE OPTICAL MEASUREMENT INSPECTION SYSTEM (OMIS II) SYSTEM MOTORIZED MOTION ON ALL AXES TRAVEL: 12"X, 6"Y, 6"Z HIGH-MASS BLACK GRANITE BASE AND UPRIGHT MEASURING PLATFORM: 52CM X 34CM, 15CM HIGH WITH 34 X 17CM GLASS PLATE LIGHTING FROM ABOVE OR BELOW THE GLASS STAGE PLATE THREADED HOLES IN TOP PLATFORM RSF-ELECTRONIK GLASS LINEAR SCALES, 0.02MM INTERVAL GRATING NSK LY15 LINEAR GUIDE RAILS WITH 4 BEARING BLOCKS PER AXIS VEXTA STEP MOTORS, THE ONE WE CAN SEE IS PX245-01AA ILLUMINATOR POWER: 120V 60HZ 2.5A MANUFACTURED: 1993 SKU: W44D007 5I-14-02(1) 450LBS - 48IN X 40IN X 44IN

[UNBRANDED] [DOES NOT APPLY] 22"L X 11"H X 5.25"W 20-SPACE FIXED LABORATORY FREEZER RACK SHELVING UNIT. SIDE HANDLES, HORIZONTAL ORIENTATION. TOTAL LENGTH: 22", TOTAL HEIGHT: 11", DEPTH/WIDTH: 5.25". CONSTRUCTION: STAINLESS STEEL, 20-SPACE DESIGN, FIXED SHELVES. RACK WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN.

[NEW] 4TITUDE FRAMESTAR 96 FULLY SKIRTED PCR PLATES S/N: W11B012 1B-17-02(1), MANUFACTURER: 4TITUDE, MODEL: FRAMESTAR 96, PART NUMBER: 4TI-0960/W, FULLY-SKIRTED PCR PLATES, WELLS: 96, TOTAL WELL CAPACITY: 0.3 ML, WORKING VOLUME: <0.2 ML, PLATE LENGTH: 120MM, PLATE WIDTH: 80.00MM, PLATE HEIGHT: 20.70MM, WELL DIAMETER: 5.46MM, MATERIAL: POLYPROPYLENE, COLOR: WHITE, SKU: W11B012, CONDITION: NEW OTHER. COMES IN NON-ORIGINAL PACKAGING. THE PCR PLATES ARE UNUSED. THE ITEMS ARE NON-STERILE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (30) NEW 4TITUDE 4TI-0960/W FRAMESTAR 96 FULLY SKIRTED PCR PLATES

[AGILENT N4903B J-BERT 2 CHANNELS 12.5 GB/S POWERS ON, NEEDS REPAIR - PARTS] MANUFACTURER: AGILENT TECHNOLOGIES MODEL: N4903B J-BERT HIGH-PERFORMANCE SERIAL BERT MOST COMPLETE JITTER TOLERANCE TEST FOR EMBEDDED AND FORWARDED CLOCK DEVICES IDEAL FOR CHARACTERIZING AND STRESSING CHIPS AND TRANSCEIVER MODULES DATA RATE FROM 150 TO 12.5 GB/S SECOND OUTPUT CHANNEL BUILT-IN TUNABLE CDR OPERATING SYSTEM: WINDOWS XP OPTIONS LISTED ON THE LABEL: UAB, C13, 003, A01, J10, J11, J12 OPTIONS LISTED IN THE SOFTWARE: A01 BIT RECOVERY MODE J11 SSC GENERATION J12 AUTOMATED JITTER COMPLIANCE CTR TUNABLE CDR 003 HALF RATE CLOCKING J10 JITTER SOURCES INSTALLED MODULE: N4903-69531 OPTION J20 INTERFERENCE CHANNEL WITH IEEE-488 GPIB INTERFACE POWER REQUIREMENT: 100-240V 47-63HZ 450VA NOT WORKING! SOLD AS-IS! SKU: Y09D006 3B-04-02(1) 62LBS - 36IN X 25IN X 14IN

[ECO PHYSICS] [CLD] [CHEMILUMINESCENCE NO / NOX ANALYZER FACEPLATE] [MANUFACTURER: ECO PHYSICS MODEL: CLD] REMOVED FROM AN ECO PHYSICS CLD 70 S CHEMILUMINESCENCE ANALYZER. FACEPLATE ONLY. SPECIFICATIONS: MANUFACTURER: ECO PHYSICS MODEL: CLD DESCRIPTION: CHEMILUMINESCENCE NO / NOX ANALYZER FACEPLATE REMOVED FROM AN "ECO PHYSICS CLD 70 S CHEMILUMINESCENCE ANALYZER" SKU: Y18S010 2C-03-03(2) 13LBS - 24IN X 8IN X 8IN

[ANELVA UGD-IS IONIZATION GAUGE TUBE SIRBM10014 B-A GAUGE SEIKO K943] THIS GAUGE TUBE IS IN GOOD COSMETIC CONDITION OTHER THAN THE FACT THAT THE BOTTOM PART OF THE TUBE THAT EXTENDS BELOW THE GAUGE IS BROKEN OFF. IT LOOKS LIKE SOMEONE TRIED TO CUT THE CLASS OFF STRAIGHT EITHER BEFORE OR AFTER THE BREAK, BUT THE EDGE IS NOT PERFECTLY STRAIGHT (SEE PHOTOS). COMES IN THE ORIGINAL ANELVA BOX. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. THIS IONIZATION GAUGE TUBE HAS NOT BEEN TESTED. THE TUBE THAT EXTENDS BELOW THE GAUGE IS BROKEN OFF. IT LOOKS LIKE SOMEONE TRIED TO CUT THE CLASS OFF STRAIGHT EITHER BEFORE OR AFTER THE BREAK, BUT THE EDGE IS NOT PERFECTLY STRAIGHT (SEE PHOTOS). NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) NEW ANELVA UGD-IS IONIZATION GAUGE TUBE SIRBM10014 B-A GAUGE SEIKO SPECIFICATIONS: MANUFACTURER: ANELVA MODEL: UGD-IS DESCRIPTION: IONIZATION GAUGE TUBE SIRBM10014 B-A GAUGE SEIKO K943 SKU: X29H022 2G-03-04(1) 3LBS - 12IN X 12IN X 8IN

[INTEGRATED AIR SYSTEMS] [47-1/2" WIDE X 24" D] LAMINAR FLOW LABORATORY FUME HOOD 120VAC OVERALL DIMENSIONS: 49-1/2" W X 36" D X 57-3/4" H HOOD DIMENSIONS: 47-1/2" W X 24" D X 30" H. CONDITION: USED. THIS HOOD IS IN GOOD/FAIR COSMETIC CONDITION WITH SCUFFS, SCRATCHES, AND DINGS FROM REGULAR INDUSTRIAL USE. THERE ARE COVERS THAT MISSING FROM THE FRONT TOP OF THE HOOD. THE LIGHT BULBS ARE BURNED OUT AND THE LENSES COVERING THOSE LIGHTS ARE BROKEN. COMES IN NON-ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS HOOD CAME TO US WITH AN OUT-OF-SERVICE TAG THAT NOTATED A REPAIR NEEDED: "FLITERS LEAKED AROUND PERIMETER". WE POWERED ON THE HOOD AND OBSERVED THE FAN MOTOR RUN AND RESPOND TO THE VARIABLE SPEED SWITCH. THE LIGHT SWITCH IS FUNCTIONAL BUT THE LIGHT BULBS ARE BURNED OUT. THE BULB TRIES TO TURN ON BUT NEVER MAKES IT. THE PLASTIC LENS COVERING THE BULBS IS BROKEN. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) INTEGRATED AIR SYSTEMS 47-1/2" WIDE X 24" D LAMINAR FLOW LABORATORY FUME HOOD SPECIFICATIONS: MANUFACTURER: INTEGRATED AIR SYSTEMS MODEL: DOES NOT APPLY DESCRIPTION: LAMINAR FLOW LABORATORY FUME HOOD 120VAC OVERALL DIMENSIONS: 49-1/2" W X 36" D X 57-3/4" H HOOD DIMENSIONS: 47-1/2" W X 24" D X 30" H SKU: X07H015 5I-14-03(1) 450LBS - 58IN X 44IN X 66IN

1998 SQUARE D POWERLOGIC CIRCUIT MONITOR INSTALLATION MANUAL MANUFACTURER: SQUARE D MODEL: 3020IM9301R10/97 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE COVER HAS A FEW ROUGH SPOTS BUT THE INNER PAGES ALL SEEM IN VERY GOOD CONDITION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) SQUARE D POWERLOGIC CIRCUIT MONITOR INSTALLATION MANUAL SPECIFICATIONS: MANUFACTURER: SQUARE D BULLETIN #: 3020IM9301R10/97 SERIES 2000 INSTRUCTION BULLETIN JAN. 1998 SKU: Q36L012 1E-15-03(1) 0LBS - 14IN X 9IN X 1IN

AGILENT N3300A DC ELECTRONIC LOAD MAINFRAME WITH GPIB & RS-232. AGILENT TECHNOLOGIES N3300A DC ELECTRONIC LOAD MAINFRAME 6 SLOTS, FULL RACK WIDTH 1800 WATTS TOTAL MAXIMUM POWER ACCEPTS N330X USER-INSTALLABLE LOAD MODULES WITHOUT ANY INSTALLED LOAD MODULES EASY SYSTEM CONFIGURATION AND RECONFIGURATION CAPABLE OF MEASURING ALL INPUTS SIMULTANEOUSLY GPIB AND RS-232 INTERFACES POWER REQUIREMENT: 100-120/200-240V 50/60HZ 440VA. THIS ITEM IS IN FAIR COSMETIC CONDITION WITH SEVERAL NOTABLE DENTS AND SCRATCHES FROM PRIOR USE, BUT NOTHING THAT WOULD AFFECT FUNCTION. SEE ESPECIALLY THE FRONT PANEL AND VENT BY THE POWER CABLE INPUT FOR THE WORST BENDS. THE DISPLAY HAS A FEW HEAVY SCRATCHES THAT DON'T AFFECT USING THE INSTRUMENT. THIS MAINFRAME IS IN GOOD WORKING CONDITION. IT FORMERLY HAD FOUR LOAD MODULES INSTALLED AND WAS ABLE TO IDENTIFY AND USE EACH OF THEM (PHOTO #4 SHOWS THIS UNIT SINKING CURRENT FROM OUR POWER SUPPLY). IT CALLS OUT ZERO ERRORS WHEN IT CHECKS ITSELF. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN.

[CLEAN AIR CAP412-6894-3] LAMINAR FLOW CLEAN WORK STATION HEPA VERTICAL CAP412-6894-3. MANUFACTURER: CLEAN AIR PRODUCTS. MODEL: CAP412-6894-3. CONDITION: USED. THIS ITEM COMES IN NON-ORIGINAL PACKAGING. IT HAS SCUFFS AND SCRATCHES FROM NORMAL USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: WHEN POWER WAS APPLIED, THE BLOWER RAN VERY SMOOTHLY. THE LIGHTS TURN ON, BUT THEY ARE NOT INCLUDED. WE HAVE A LARGE QUANTITY OF THESE AND SOME ARE WIRED SO THAT THE BLOWER HAS TO BE ON IN ORDER FOR THE LIGHTS TO COME ON. NOTE: THE SKATES SHOWN ARE NOT INCLUDED IN THIS PURCHASE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CLEAN AIR CAP412-6894-3 LAMINAR FLOW CLEAN WORK STATION (1) CLEAN AIR PRODUCTS OPERATION & MAINTENANCE INSTRUCTIONS FOR SERIES 412 VERTICAL LAMINAR AIR FLOW CLEAN WORK STATIONS. SPECIFICATIONS: WORK STATION: MANUFACTURER: CLEAN AIR PRODUCTS MODEL: CAP412-6894-3 SERIES 412 CAP 412 120VAC 60 HZ 8.6A SINGLE PHASE 3 - STANDARD FILTERS ON TOP ABOVE BLOWER, 20"X25"X1" 1 - BLOWER: ADJUSTABLE SPEED APPROXIMATE OVERALL DIMENSIONS: 74-1/2"W X 32"D X 94"H APPROXIMATE INTERIOR DIMENSIONS: 70-1/2"W X 30"D X 63"H 2 - FLUORESCENT BULBS F72T12 (WORK, BUT NOT INCLUDED) HEPA FILTER: MANUFACTURER: CLEAN AIR PRODUCTS EFFICIENCY: 99.99% @ 0.3 MICRON APPROXIMATE CFM: 1081 DIMENSIONS: 24" X 72" X 3" CONSISTS OF TWO BASIC MEMBERS: THE ABSOLUTE HEPA FILTER AND A FLEXIBLE DUCT TO FORM A MODULAR COMPONENT SKU: U25L005 6-BILR1(1) 500LBS - 83IN X 40IN X 50IN

[STARRETT CRYSTAL PINK 000915 AA GRANITE SURFACE PLATE 92"X 44"X 16" +STEEL STAND] MANUFACTURER: STARRETT MODEL: CRYSTAL PINK 000915 DESCRIPTION: GRANITE SURFACE PLATE GRADE AA LABORATORY SURFACE DIMENSIONS: 92"L X 44"W X 16" H 4-SIDED LIP LIP DIMENSIONS: 2" DEPTH 8" HIGH STAND STEEL CONSTRUCTION BROWN DIMENSIONS: 92" L X 44" W X 18" H 4-LEG ADJUSTABLE FEET CONDITION: USED. THIS SURFACE PLATE AND STAND ARE IN GOOD COSMETIC CONDITION WITH SCUFFS, SCRATCHES, CHIPS, AND DENTS ON THE STAND FROM INDUSTRIAL USE AND TRANSPORTATION. THERE ARE 5 SIGNIFICANT CHIPS ON THE BOTTOM OF THE LONG SIDES, TWO ON ONE SIDE AND 3 ON THE OTHER SIDE (SEE PHOTOS). ADDITIONALLY, THERE IS A TINY CHIP ON THE SURFACE OF THE PLATE, AND ONE OF THE CORNERS IS CHIPPED (SEE PICTURE). THE STAND IS STRUCTURALLY SOUND BUT DOES HAVE SOME DENTS ON ONE OF THE LONG SIDES (SEE PHOTO). THE VINYL 2/3 COVER IS IN GOOD CONDITION WITH LITTLE SCUFFS AND NO TEARS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE CONFIRMED THE STAND IS STRUCTURALLY SOUND AND SUPPORTS THE WEIGHT OF THE SURFACE PLATE. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) STARRETT CRYSTAL PINK 000915 AA GRANITE SURFACE PLATE 92"X44"X16" + STEEL STAND SPECIFICATIONS: MANUFACTURER: STARRETT MODEL: CRYSTAL PINK 000915 DESCRIPTION: GRANITE SURFACE PLATE GRADE AA LABORATORY SURFACE DIMENSIONS: 92"L X 44"W X 16" H 4-SIDED LIP LIP DIMENSIONS: 2" DEPTH 8" HIGH STAND STEEL CONSTRUCTION BROWN DIMENSIONS: 92" L X 44" W X 18" H 4-LEG ADJUSTABLE FEET SKU: X13H034 5F-08-01(1) 6950LBS - 104IN X 56IN X 42IN

[NTA INDUSTRIES 5525C22 ULTRACLN] 42"L X 22.5"W X 42"H STAINLESS CLEANROOM TABLE. MANUFACTURER: NTA INDUSTRIES INC. MODEL: 5525C22 CLEANROOM TRANSFER TABLE SERIES: ULTRACLN TOTAL LENGTH: 42.25" TOTAL HEIGHT: 41.75" TOTAL WIDTH: 22.5" WORK AREA DIMENSIONS: 37.75" X 22.5" MATERIAL: STAINLESS STEEL CASTER MFR. R.T. LAIRD CASTER WHEEL DIAMETER: 6". INCLUDES (1) NTA INDUSTRIES INC. 5525C22 ULTRACLN CLEANROOM TABLE AND (4) R.T. LAIRD CASTERS 6".

[BAUSCH & LOMB 31-75-05] COMPOUND MICROSCOPE BASE, DAMAGED MOUNTS FOR PARTS. THIS MICROSCOPE IS IN FAIR COSMETIC CONDITION. THERE ARE RESIDUES FROM OLD ADHESIVE LABELS AS WELL AS WRITING, SCRATCHES AND ETCHING ON THE FRAME. THE STAGE IS BROKEN-OFF FROM THE FOCUS MOUNT. THE DOVETAIL MOUNT ON THE BOTTOM OF THE HEAD WAS BROKEN OFF, THE SCREW HOLES ARE STRIPPED AND THE GLASS IN THE HEAD MOUNT IS BADLY CHIPPED. THE STAGE RAISES AND LOWERS WHEN THE KNOBS ARE TURNED, BUT IT IS A LITTLE LOOSE ON ITS MOUNT. THE LAMP AND DIMMER BOTH WORK (WE CAN'T GUARANTEE LAMP LIFE). THE POWER LIGHT COMES ON BUT THE LAMP IS BURNED OUT. MANUFACTURER: BAUSCH & LOMB CAT. NO.: 31-75-05 BINOCULAR VIEWING TUBE HEAD FOUR-PLACE OBJECTIVE TURRET UNDERSTAGE CONDENSER MOUNT TRANSMITTED LIGHT ILLUMINATOR IN BASE INTERPUPILLARY DISTANCE: 54-74MM 23MM EYETUBES DIOPTER ADJUSTMENT BOTH EYETUBES 18LBS - 19IN X 13IN X 13IN

CORRECT-TOUCH PFXT101 SMALL 10" LATEX POWDER-FREE AMBIDEXTROUS GLOVES (100) - MANUFACTURER: CORRECT-TOUCH MODEL: PFXT101 DESCRIPTION: LATEX POWDER-FREE AMBIDEXTROUS TEXTURED GLOVES SIZE: SMALL LENGTH: 10" PACKAGING: 100-COUNT BAG BEADED CUFF SKU: U18U008 2H-01-04(9) 3LBS - 12IN X 12IN X 5IN

MEDICAL CORPORATION 302139 REVISION B POWER REGULATOR ASSEMBLY BOARD 302137 - MANUFACTURER: MEDICAL CORPORATION MODEL: 302139 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE BOARD IS IN GOOD CONDITION. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE BOARD WAS PULLED FROM A WORKING ENVIRONMENT. NO TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) MEDICAL CORPORATION 302139 POWER REGULATOR BOARD SPECIFICATIONS: MANUFACTURER: MEDICAL CORPORATION MP/N: 302139 REVISION B MP/N: ASSY. 302137 REVISION C POWER REGULATOR BOARD SKU: O12N019 1D-09-03(1),3A-02-03(2) 3LBS - 12IN X 12IN X 6IN

[VWR] [10754-818] LAB STORAGE BOTTLES 500ML (9) - MANUFACTURER: VWR MODEL: 10754-818 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE BOTTLES ARE IN GOOD, USED CONDITION WITH MINOR SCUFFS AND SOME MARKINGS FROM PREVIOUS USE, AS SHOWN IN THE PHOTOS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE BOTTLES WERE REMOVED FROM A DECOMMISSIONED ENVIRONMENT. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. THE UNITS DO NOT COME WITH BOTTLE CAPS. ONLY WHAT IS PICTURED IS INCLUDED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (9) LAB STORAGE BOTTLES 500ML (7)VWR (1)KIMAX (1)GIBCOBRL SPECIFICATIONS: MANUFACTURER: VWR MODEL: 10754-818 LABORATORY STORAGE/MEDIA BOTTLES CAPACITY: 500 ML MATERIAL: BOROSILICATE GLASS AUTOCLAVABLE TO 180 C HEIGHT: 176 MM DIAMETER: 86 MM BOTTOM DIAMETER CAP COMPATIBILITY: GL 45 (NOT INCLUDED) MANUFACTURER: KIMBLE KIMAX-35 MODEL: DOES NOT APPLY CAPACITY: 500 ML MATERIAL: BOROSILICATE GLASS MANUFACTURER: GIBCOBRL MODEL: DOES NOT APPLY CAPACITY: 500 ML MATERIAL: BOROSILICATE GLASS

AEROFLEX S3L1R-5 PIN DIODE SWITCH 1-2GHZ SINGLE POLE, THREE THROW REFLECTIVE - MANUFACTURER: IFR AEROFLEX MARCONI MODEL: S3L1R-5 CONDITION: NEW. COMES IN FACTORY ORIGINAL PACKAGING. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AEROFLEX S3L1R-5 PIN DIODE SWITCH SPECIFICATIONS: MANUFACTURER: AEROFLEX MODEL: S3L1R-5 DESCRIPTION: PIN DIODE SWITCH TYPE: SINGLE POLE, THREE THROW FREQUENCY RANGE: 1-2 GHZ MAX. INSERTION LOSS: 1.0 DB VSWR RATIO: 1.5:1 MIN. ISOLATION: 80 DB WEIGHT: 0.10 LBS. CONDITION: NEW QUANTITY: 1 SKU: P13P006 1A-02-02-04(2) 0LBS - 8IN X 8IN X 4IN

COOPER INSTRUMENTS & SYSTEMS DFI 3900 STRAIN GAUGE RANGE 0.222-11 NEWTONS 10VDC 4-CHANNEL. THIS STRAIN GAUGE IS IN GOOD COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM REGULAR INDUSTRIAL USE AND COMES IN NON-ORIGINAL PACKAGING. THE LABEL IS DIFFICULT TO READ IN PLACES. WE HAVE DEFINED THE RANGE AS 0.222-11 NEWTONS BASED ON OUR BEST READING. THIS STRAIN GAUGE WAS REMOVED FROM DECOMMISSIONED EQUIPMENT AND HAS NOT BEEN TESTED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. MANUFACTURER: COOPER INSTRUMENTS & SYSTEMS MODEL: DFI 3900 DESCRIPTION: STRAIN GAUGE RANGE 0.222-11 NEWTONS 10VDC 4-CHANNEL 4-ALARM CALIBRATION DUE 13 FEB 2009 UNIT SET FOR 115VAC

[UNBRANDED] 11-SPACE DOUBLE-HANDLE VERTICAL LAB FREEZER RACKS 25.25" X 6.5" X 6" (2) - MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE RACKS ARE IN GOOD, USED CONDITION WITH SOME SCUFFS AND SCRATCHES FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE RACKS WERE REMOVED FROM DECOMMISSIONED ENVIRONMENTS. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) 11-SPACE DOUBLE-HANDLE VERTICAL LAB FREEZER RACKS 25.25"X6.5"X6" SPECIFICATIONS: MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY LABORATORY FREEZER/STORAGE RACK MATERIAL: STAINLESS STEEL 11-SPACE DESIGN LENGTH: 25.25" WIDTH: 6.25" DEPTH: 6" DOUBLE HANDLE DESIGN

[ROFIN BAASEL LASERTECH] LASER SHUTTER WITH CABLE FROM BAASEL SMP 65 65W - MANUFACTURER: ROFIN MODEL: 101106-178 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS SHUTTER IS IN GOOD COSMETIC CONDITION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS WAS REMOVED FROM A DECOMMISSIONED SMP 65 MARKING LASER. WE HAD A PEEK INSIDE OUT OF CURIOSITY BECAUSE IT'S NOT JUST A LEAF SHUTTER, IT'S A DUAL-BLADED ROTATING SYSTEM. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ROFIN 101106178 SHUTTER SPECIFICATIONS: MANUFACTURER: ROFIN (BAASEL LASERTECH) CAT.NO.: 101106178 LASER SHUTTER WITH INDICATOR LAMP ON TOP ELECTRONIC CONTROL, REQUIRES DRIVE OR POWER SUPPLY (NOT INCLUDED) ROTARY SOLENOID: MAGNET-SCHULTZ GDAY025X20E14 (G DA Y 025 X20 E14) FAIL-SAFE (POWER-OFF = BLOCKED LIGHT PATH) SKU: X49D015 2I-04-02(1) 2LBS - 6IN X 6IN X 4IN

[1980S] ZUMBACH ODAC 35XY-J-19M-53 LASER MEASUREMENT SYSTEM - PARTS - MANUFACTURER: ZUMBACH MODEL: ODAC CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THESE PARTS ARE IN FAIR COSMETIC CONDITION WITH LOTS OF SCUFFS/SCRATCHES FROM PRIOR USE. THE CORNERS OF THE SCANNER AND THE TOP OF THE CONTROL RACK ARE THE PLACES WITH THE MOST SCRATCHED/CHIPPED PAINT. WE WERE UNABLE TO FIND ANY INFORMATION ABOUT THESE PARTS ONLINE, SORRY. PLEASE NOTE: THIS IS MISSING AT LEAST THE CABLE TO CONNECT THE SCANNER TO ITS CONTROLLER. ANY INTERNAL CABLES NOT SHOWN IN THE CONTROL CABINET ARE NOT INCLUDED! THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS LOT IS IN AT-LEAST-PARTIAL WORKING CONDITION. NOTHING HAPPENS WHEN THE ZZZZ IS PLUGGED INTO POWER. WHEN THE CONTROLLERS ARE SWITCHED ON, THEY GO THROUGH SELF-TESTING AND END UP WITH THE SHOWN DISPLAYS OF "E1, ERR 300, AND NO VIDEO SIGNAL IS BEING RECEIVED FROM SCANNER. CHECK POWER AND LIGHT SOURCE". WE ARE NOT SURE WHAT THESE MEAN. DURING BOOT-UP, THE USYS CONTROLLER SAID ITS LAST CALIBRATION WAS IN 1987. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ZUMBACH AE ALARM ENUNCIATOR PANEL TYPE AE2-19-RK2 (1) ZUMBACH ODAC P80, TYPE 35XYJ-19M-53, 19M (1) ZUMBACH USYS 100B UNIVERSAL PROCESSOR/CONTROLLER (1) ZUMBACH ODAC 35XY-J LASER MEASURING HEAD SPECIFICATIONS: MANUFACTURER: ZUMBACH ODAC LASER MEASURING SYSTEM VERY OLD, 1980S VINTAGE ODAC 35XY MEASURING HEAD MEASURES IN TWO AXES WITH HIGH PRECISION MEASURING FIELD: 35MM MINIMUM OBJECT DIAMETER: 0.25MM MEASURING ACCURACY: 0.01MM SAMPLING FREQUENCY: 200/SEC LIGHT SOURCE: HENE LASER WITH V-GUIDE ODAC P80 PROCESSOR THUMBWHEEL SWITCHES FOR NOMINAL VALUE, OFFSET VALUE, TOLERANCE LIMIT, DISPLAY AVERAGING, PRODUCT ID/OD RATIO HI/GO/LO SIMPLE VISUAL INDICATOR LIGHTS RESPONSE TIME: 0.04 TO 99 SEC SKU: W30D014 5F-01-01(1) 210LBS - 48IN X 40IN X 36IN

[CASCADE TEK] TVO-2 VACUUM OVEN WITH PUMP, 1.7 CUBIC FEET, 1500 WATTS, 115V POWER. MANUFACTURER: CASCADE TEK MODEL: TVO2. THIS OVEN IS IN FAIR COSMETIC CONDITION. THERE ARE SEVERAL SCUFFS AND SCRATCHES OUTSIDE, WITH SLIGHT RESIDUES HERE AND THERE. INSIDE, IT LOOKS PRETTY CLEAN, WITH MINOR RUB MARKS. THE LABEL ON THE OVEN IS PEELING. THE VACUUM PUMP HAS SOME BLEMISHES IN THE PAINT. THE OIL IN THE PUMP IS CLEAR. THIS OVEN IS IN MOSTLY-WORKING CONDITION. IT CONTROLS TEMPERATURE WELL, BUT THE VACUUM LEVEL ONLY GOES TO 28" INSTEAD OF 29.9". WE SET 100O AND FOUND IT OVERSHOT ABOUT 5O BEFORE STABILIZING (GOOD, SPEC IS 7%). WE SET 220O AND IT EVENTUALLY REACHED THAT TEMPERATURE AND HELD STEADY. THE EZ-ZONE CONTROLLER CAN HAVE ITS PID TUNING ADJUSTED TO BE FASTER TO REACH TEMPERATURE, BUT TUNING IS TRICKY. THE MANUFACTURER'S TUNING DOES NOT OVERSHOOT MUCH, BUT IT TAKES MANY HOURS (AS THE MANUAL SAYS IT SHOULD) TO REACH TEMPERATURE. THE VACUUM PUMP RUNS RELATIVELY QUIETLY, AND DRAWS DOWN THE VACUUM LEVEL IN THE OVEN QUICKLY. ULTIMATE VACUUM LEVEL IN THIS SETUP IS ABOUT 28"HG (WHICH IS A LITTLE HIGH, THE SPEC IS 29.9"). INCLUDED: (1) CASCADE TVO-2 VACUUM OVEN (1) PFEIFFER DUO 10M VACUUM PUMP HOSES/SEALS/CLAMPS/VALVES/PUMP EXHAUST FILTER AS SHOWN SPECIFICATIONS: MANUFACTURER: CASCADE TEK MODEL: TVO-2 P/N: 9100744 VACUUM OVEN CAPACITY: 1.7 CUBIC FOOT VOLUME INTERIOR DIMENSIONS: 12" X 12" X 20" TEMPERATURE RANGE: AMBIENT + 5O TO 220O C INCLUDES VACUUM PUMP, HOSES, AND (1) STACKABLE SHELF INSULATED GLASS DOOR WINDOW POWER: 115V 50/60HZ 10A HEATER: 1500 WATTS CONTROLLER: WATLOW EZ-ZONE DIGITAL PID CONTROLLER CONTROLLER COMMUNICATION: RS-485 SEPARATE OVERTEMPERATURE SAFETY VACUUM PUMP: PFEIFFER DUO10M (MODEL: PKD62707D) SELECTABLE GAS BALLAST IN CASE YOU HAVE FUNNY BUSINESS OFF-GASSING IN YOUR CHAMBER MOTOR: LEROY SOMER LS80PR/T VACUUM PUMP CAN BE RUN FROM 100-120/200-240V 50/60HZ SINGLE PHASE MAINS.

[UNBRANDED] OPTIC MOUNTS, VARIOUS 45 LENSES/ VERTCAL OPTIC MOUNTS (5) - MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THESE OPTIC MOUNTS ARE IN GOOD CONDITION WITH MINOR SCUFFS AND SCRATCHES BUT NOTHING ON THE LENSES THEMSELVES. 3 OF THESE ARE 45 MIRRORS AND THE OTHER 2 ARE VERTICAL MIRROR MOUNTS IN A METAL "CASE". THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THESE LENS MOUNTS WERE REMOVED FROM A DECOMMISSIONED LAB AND NOT TESTED SEPARATELY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) 2" 45 MIRROR LENS MOUNT (1) 3" 45 MIRROR LENS MOUNT (1) 10 3/4" VERTICAL MIRROR OPTIC MOUNT (1) 16 13/16" VERTICAL MIRROR OPTIC MOUNT SPECIFICATIONS: MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY DESCRIPTION: OPTIC MOUNTS BLACK ANODIZED ALUMINUM CONSTRUCTION SKU: X29S019 1D-12-01(1) 15LBS - 22IN X 15IN X 10IN

[AGILENT TECHNOLOGIES 6552A] DC POWER SUPPLY 0-20V 0-25A 500 WATTS 120V INPUT - MANUFACTURER: AGILENT TECHNOLOGIES MODEL: 6552A. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN FAIR COSMETIC CONDITION WITH MINOR BLEMISHES FROM PRIOR USE. THE WORST ARE ON TOP, WITH DINGS/SCUFFS/SCRATCHES ON TOP OF THE FRONT/TOP PLASTIC BEZEL, AND THE PAINT ON TOP IS UNEVEN, WITH STAINS AND BLOTCHES IN THE MIDDLE. THE KNOBS ARE NOT ORIGINAL, AND THEY WOBBLE A LITTLE AS THEY ARE TURNED. THE PLASTIC COVERS ON THE END OF THE CARRY HANDLES ARE ALL EITHER CRACKING OR MISSING. THIS SUPPLY IS IN GOOD WORKING CONDITION WITH ONE CAVEAT: THE DISPLAYS ARE UNSTABLE. OUR BENCH METER SAID THE VOLTAGE WAS STEADY WHILE THE SUPPLY SAID THE VOLTAGE WAS FLUCTUATING SEVERAL MILLIVOLTS. OUR LOAD SAID THE CURRENT OUTPUT WAS STEADY BUT THE SUPPLY INDICATED FLUCTUATIONS IN THE 3RD SIGNIFICANT DIGIT OF +/-2. CONTROLS RESPOND TO USER INPUTS AS EXPECTED, THE DISPLAY IS EASY TO READ. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT 6552A POWER SUPPLY SPECIFICATIONS: MANUFACTURER: AGILENT TECHNOLOGIES MODEL: 6552A DC SYSTEM POWER SUPPLY OUTPUT: 0-20V DC 0-25A POWER: 120V AC 50/60HZ 1380VA REMOTE SENSE CAPABLE SINGLE OUTPUT CONTROLLED FAN SPEED FOR REDUCED NOISE FAST, LOW-NOISE OUTPUT REAL-TIME DIGITAL VOLTAGE AND CURRENT METERS DIMENSIONS: 17"W X 22"D X 5.5"H, 52LBS.