Electronic Lab Test Measurement Equipment Day 1 of 3 day event

PARTICLE MEASURING SYSTEMS AM-12-1.0-(3) PARTICLE COUNTER 12-PORT + CABLE - MANUFACTURER: PARTICLE MEASURING SYSTEMS PMS MODEL: AM-12-1.0-(3) CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS PARTICLE COUNTER IS IN GOOD COSMETIC CONDITION WITH A FEW MINOR SCUFFS AND SCRATCHES FROM NORMAL USE, BUT NOTHING MAJOR OR ANYTHING THAT WOULD AFFECT FUNCTION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS ITEM WAS NOT TESTED BY US, SINCE WE DO NOT HAVE THE PROPER RESOURCES. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) PARTICLE MEASURING AM-12-1.0-(3) PARTICLE COUNTER (1) CABLE SPECIFICATIONS: MANUFACTURER: PARTICLE MEASURING SYSTEMS MODEL: AM-12-1.0-(3) SN: 32791-1194-484 12 PORT SKU: Q47L004 1B-02-01(1) 13LBS - 18IN X 12IN X 12IN

[FTS SYSTEMS XE75 TEMPERATURE CYCLING FTS AIR-JET COOL/HEAT -WET COOLING SYSTEM B] MANUFACTURER: FTS SYSTEMS MODEL: XE752_01 AIR-JET XE PRECISION TEMPERATURE CYCLING SYSTEM TEMPERATURE RANGE: -75OC TO +225OC THERMAL FORCING UNIT FITS ON THE BENCHTOP SELF-CONTAINED ONLY REQUIRES DRY AIR, NO NITROGEN REQUIRED! MONITOR AND CONTROL FROM AN INTERNAL OR EXTERNAL (SAMPLE-MOUNTED) THERMOCOUPLE SAVE MULTI-STEP PROFILES IN THE WATLOW F4 DIGITAL CONTROLLER RS-232 OR GPIB (IEEE_488) PROGRAMMABILITY TO INTERFACE WITH AUTOMATED TEST EQUIPMENT FLOW RATES AJUSTABLE FROM 1.0 TO 4.0 SCFM (2.0 SCFM GIVES BEST TEMPERATURE CONTROL RANGE) SMALL ENOUGH TO BE RACK-MOUNTED REFRIGERATION UNIT DIMENSIONS: 24" X 15" X 16"H (APPROXIMATELY) BUILT-IN OVERTEMPERATURE SAFETY BUILT-IN LOW-FLOW SAFETY PID DIGITAL CONTROLLER RATED FOR +/-0.5O STABILITY AND REPEATABILITY (PLEASE READ TESTING NOTES!) CONTROL UNIT DIMENSIONS: 10" X 8" X 7" (APPROXIMATELY) TRANSITION SPECIFICATIONS @ 2SCFM (PLEASE READ TESTING NOTES!) -55OC TO +125OC <10 SECONDS +125OC TO -55OC <20 SECONDS POWER: 120V 60HZ 20A REQUIRES CLEAN DRY AIR, 7SCFM WITH -80OC DEWPOINT NO THERMAL CAPS (SAMPLE ENCLOSURES) ARE INCLUDED REFRIGERATION UNIT WITH OUTPUT HOSE ATTACHED, CONTROLLER, CONNECTION CABLE

NEW HAKKO T7/T15-R27 SOLDERING TIP FOR FM-202/FP-102. PART #: T7/T15-R27 TIP SHAPE: 2.7R. FOR IRONS: HAKKO FM-203-HANDPIECE : HAKKO FM-2027(70W), HAKKO FM-204-HANDPIECE : HAKKO FM-2027(70W), HAKKO FX-950-HANDPIECE : HAKKO FM-2028(70W), HAKKO FX-951-HANDPIECE : HAKKO FM-2028(70W), HAKKO FX-952-HANDPIECE : HAKKO FM-2028(70W), HAKKO FM-202-HANDPIECE : HAKKO FM-2021(70W) OR HANDPIECE : HAKKO FM-2027(70W). THE T15 TIPS HAVE REPLACED THE T7 TIPS. THE ONLY DIFFERENCE IS HAKKO HAS PHASED OUT THE BARCODE FROM THE TIPS. SEE THE HAKKO PRODUCT BULLETIN.

[NIKON 6R] MECHANICAL X-Y STAGE WITH 200MM ROTATING WAFER HOLDER PLATE, 15CM TRAVEL. RECTANGULAR MECHANICAL STAGE. STAGE FOR MOUNTING ON YOUR MICROSCOPE. TRAVEL: 153 X 153 MM. MAIN TOP AREA: 28 X 23 CM. STAGE PLATE WELL: 20 X 18 CM. OPENING INSIDE STAGE PLATE WELL: 16 X 16 CM. ROUND STAGE HAS RINGS FROM 6 CM INSIDE TO 20 CM OUTSIDE. SMALL LIP ON TOP OF ROUND STAGE, 204 MM INSIDE DIAMETER. ROUND WELL UNDER ROTARY STAGE: 151 MM INNER DIAMETER, 156 MM OUTER DIAMETER. REVERSE SIDE OF CIRCULAR WELL UNDER ROUND STAGE: 156 MM DIAMETER PROTRUSION. PROTRUDING PINS FOR RAPID MANUAL MOTION OF ROUND AND TOP RECTANGULAR STAGES. STAGE MOUNTING BOLT PATTERN: 14 X 10 CM. HOLE UNDER STAGE: 7 CM. BLACK ALUMINUM CONSTRUCTION. FORMERLY USED WITH AN OPTIPHOT-66 MICROSCOPE.

[THERMO FISCHER SCIENTIFIC 3950] LARGE CAPACITY CO2 INCUBATOR REACH-IN 29-CU-FT. 100/120V 50/60 HZ 10 AMP SINGLE PHASE 2 WIRE. PORTS: 1 - CO2 INLET (15 PSIG REGULATED), 1 - ALARM CONTACT (30V MAX / 1A MAX), 0 - RS-485 EMPTY PORT. FOR PARTS OR NOT WORKING. SCUFFS AND SCRATCHES FROM NORMAL USE. AS/IS FOR PARTS OR REPAIR ONLY. UPON POWER UP, IT INITIALIZED AND DISPLAYED "SYSTEM OK". IT INDICATED WHEN THE DOOR WAS OPEN AND THAT THERE WERE NO CO2 TANKS CONNECTED. THE DOOR DOES NOT OPEN AND CLOSE NORMALLY. THE BOTTOM PIN/HINGE IS BROKEN OFF. RS-485 PORT IS EMPTY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. WEIGHT: 580LBS. DIMENSIONS: 48IN X 42IN X 88IN.

[UNBRANDED] [DOES NOT APPLY] 8FT WET SOLVENT PARTS CLEANER BENCH WITH 1-SINK. WORK AREA (NOT INCLUDING THE SINK): 64"L X 30"D. SINK: 18"L X 18"W X 12"D. INCLUDES 1 OMRON SOLID-STATE DIGITAL TIMER: H3CA. SCUFFS AND SCRATCHES FROM NORMAL USE. DIGITAL TIMER WAS NOT TESTED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS INCLUDED IF NOT LISTED OR SHOWN. SKU: V04L004. 520LBS - 104IN X 48IN X 83IN.

[UNBRANDED] LABORATORY FREEZER RACKS ADJUSTABLE W/ (2) EXTRA SHELVES. THE RACK IS IN GOOD, USED CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE. LABORATORY FREEZER RACK SHELVING UNIT ADJUSTABLE, REMOVABLE SHELVES HORIZONTAL ORIENTATION TOTAL LENGTH: 22" TOTAL HEIGHT: 11" DEPTH/WIDTH: 5.30" CONSTRUCTION: STAINLESS STEEL 20-SPACE CONFIGURATION, INCLUDES 2 ADDITIONAL SHELVES SINGLE HANDLE

[THERMO FISHER SCIENTIFIC NICOLET IR200] INFRARED SPECTROMETER SPECTRAL RANGE: 7800~375CM-1 RESOLUTION: 1CM-1 DETECTOR: DTGS INTERFEROMETER: QUADRASCAN CUBE CORNER INTERFEROMETER DESIGN VOLTAGE: +5V/+12V DC POWER MAX: 45W -PARTS - MANUFACTURER: THERMO FISHER SCIENTIFIC MODEL: NICOLET IR200 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THE DEVICE IS IN HEAVILY USED CONDITION WITH SOME SCUFFS, SCRATCHES, AND CHIPS TO THE SAMPLE COVER. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE UNIT WAS REMOVED FROM A DECOMMISSIONED UNIVERSITY LABORATORY ENVIRONMENT. THE UNIT IS BEING SOLD AS/IS FOR PARTS OR REPAIR DUE TO NOT HAVING THE CORRECT POWER SUPPLY TO TEST THE UNIT. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) THERMO FISHER SCIENTIFIC NICOLET IR200 INFRARED SPECTROMETER 7800~375CM-1 SPECIFICATIONS: MANUFACTURER: THERMO FISHER SCIENTIFIC MODEL: NICOLET IR200 INFRARED SPECTROMETER SPECTRAL RANGE: 7800~375CM-1 RESOLUTION: 1CM-1 DETECTOR: DTGS INTERFEROMETER: QUADRASCAN CUBE CORNER INTERFEROMETER DESIGN VOLTAGE: +5V/+12V DC POWER MAX: 45W SKU: X14B011 2C-03-03(1) 31LBS - 23IN X 23IN X 11IN

[NEW] TEKTRONIX TCA292D TEKCONNECT 2.92MM SMA 50 OHMS ADAPTER CONNECTOR. MANUFACTURER: TEKTRONIX, MODEL: TCA292D, DESCRIPTION: TEKCONNECT ADAPTER CONNECTOR DC TO 33 GHZ (INSTRUMENT DEPENDENT) 50 INPUT (ONLY) SMA COMPATIBLE 2.92MM CONNECTION. INCLUDES: (1) TEKTRONIX TCA292D TEKCONNECT 2.92MM SMA 50 OHMS ADAPTER CONNECTOR.

OPTOSIGMA 3-AXIS XYZ LINEAR TRANSLATION STAGE 12.5X12.5X7MM TASB-653/652 - MANUFACTURER: OPTOSIGMA MODEL: TASB-65. INCLUDED: (1) OPTOSIGMA TASB-652-M6 XY STAGE (1) OPTOSIGMA TASB-653-M6 Z STAGE SPECIFICATIONS: MANUFACTURER: OPTOSIGMA PART NUMBER: TASB-653-M6 Z-AXIS TRANSLATION STAGE TRAVEL: 7MM LOAD CAPACITY: 98.1N ADJUSTMENT VIA THUMBWHEEL PART NUMBER: TASB-652-M6 X/Y TRANSLATION STAGE TRAVEL: +/-12.5MM LOAD CAPACITY: 147N ADJUSTMENT VIA KNOB WITH HEX HEY FOOTPRINT: 65 X 65 MM MINIMAL PROTRUSIONS, EVEN ADJUSTMENT KNOB IS ALMOST ENTIRELY WITHIN FOOTPRINT LOCKABLE WITH SMALL ALLEN WRENCH SCREW PITCH: 0.5MM DOVETAIL SLIDE LINEAR MOTION GUIDES BRASS BODY MATERIAL.

SM-535/ AN/APM-282 AIM-7 MONITOR-SIMULATOR COMPUTER TEST SET W/ CASE AND CABLES - MANUFACTURER: MCDONNEL MODEL: AN/APM-282 CONDITION: FOR PARTS OR NOT WORKING. THIS SET IS IN FAIR COSMETIC CONDITION. THE OUTSIDE OF THE BOX HAS LOTS OF WEAR, SCUFFS/SCRATCHES/DENTS AND LABELS FROM SHIPPING. THE INSIDE LOOKS PRETTY CLEAN. THE TOP LID HAS HEAVY DENTS THAT HAVE PUSHED THE PAINT OFF THE METAL IN SEVERAL PLACES. THE CABLES ARE COATED WITH A SLIMY, FOUL-SMELLING SUBSTANCE; WE ARE NOT SURE WHAT THIS MAY BE. IT SMELLS LIKE MILITARY SURPLUS, FOR SURE. ONE OF THE LATCHES WON'T SET BECAUSE ITS CATCH IS STRETCHED OUT, AND ONE LATCH IS MISSING. THE CABLES BARELY FIT IN THE STORAGE COMPARTMENT. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE ARE NOT ABLE TO FULLY TEST THIS SET. THE SWITCHES CAN ALL BE TURNED. THE LATCHES FOR THE CABLE COMPARTMENT ARE DIFFICULT TO OPERATE. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AN/APM-282 TEST SET, COMPUTER SPECIFICATIONS: MANUFACTURER: MCDONNEL AN/APM-282 COMPUTER TEST SET 53E340014-305 SM-535/APM-282 MONITOR-SIMULATOR P/N: 917E065G01 MCDONNEL 53E340014-15 POWER: 115V 400HZ 1PHASE INCORPORATED MODIFICATION: 33D5-15-11-502 HOURS METER: 815 OPERATE IN ACCORDANCE WITH T.O. 33D5-15-11-1 MAINTENANCE AND TEST SET FOR AIRBORNE RADAR SYSTEM TO TEST MISSILE COMPUTER FUNCTIONS, LAUNCH TEST SET WITH SETTINGS FOR AIM-7 MISSILE, POSSIBLY A SPARROW COMPUTER TEST SET (?) STURDY METAL SHIPPING/STORAGE CONTAINER HEAVY! NEARLY 93LBS! ABOUT 21" X 16" X 18" PLUS LATCHES AND HANDLES TOP LID HAS STORAGE COMPARTMENT FOR CABLES

[NIKON ECLIPSE L200 TRINOCULAR MICROSCOPE WITH OPTICS, 8X8 STAGE NOMARSKI DIC] MANUFACTURER: NIKON MODEL: ECLIPSE L200 CONDITION: USED. THIS MICROSCOPE IS IN FAIR COSMETIC CONDITION WITH MINOR SCUFFS/MARKS/SCRATCHES FROM PRIOR USE. THE GLASS HAS BEEN RECENTLY CLEANED AND IS IN GOOD CONDITION. THE ONLY NOTABLE BLEMISH IS INVISIBLE: THE MOUNTING DOVETAIL FOR THE VIEWING TUBE HAS A BROKEN PIECE (SEE PHOTO) WHICH DOES NOT PREVENT IT MOUNTING ON THE SCOPE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS UNIT IS IN GOOD WORKING CONDITION, EXCEPT THAT THE VERY BOTTOM OF THE FOCUS TRAVEL HAS A LITTLE JUMP IN THE MOTION, WELL BELOW THE BOTTOM OF FOCUSING RANGE. THE VIEW THROUGH THE SCOPE IS CLEAR AND BRIGHT, WITH GOOD COLOR. THE STAGE, HEAD, AND FOCUS MECHANICS WORK AS EXPECTED. THE ILLUMINATOR WORKS. THE DIC ANALYZER WORKS THE MOTORIZED NOZEPIECE ROTATES TO EACH POSITION NORMALLY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) NIKON ECLIPSE L200 BASE (1) NIKON ECLIPSE 8X8 STAGE (1) NIKON LU PLAN 5X OBJECTIVE LENS (1) NIKON LU PLAN 10X OBJECTIVE LENS (1) NIKON LU PLAN 20X OBJECTIVE LENS (2) CFIUW 10X/25 EYEPIECES (1) TRINOCULAR OBJECTIVE VIEWING TUBE (1) NIKON TRINOCULAR TUBE (1) DIAGNOSTIC INSTRUMENTS 1.0X C-MOUNT ADAPTER (1) 6-POSITION MOTORIZED TURRET (1) LHS-H100P-2 LAMPHOUSE (NEW LAMP IS INSTALLED) (1) NIKON L2-PO POLARIZER (1) NIKON L2-AN ANALYZER (1) NIKON L-DIC NOMARSKY PRISM SLIDER (1) NIKON NCB11 FILTER SPECIFICATIONS: MANUFACTURER: NIKON MODEL: ECLIPSE L200 TRINOCULAR COMPOUND MICROSCOPE NOMARSKY PRISM/DIC ANALYZER & POLARIZER SLIDER INSERTS 6-PLACE MOTORIZED OBJECTIVE TURRET OBJECTIVE LENSES: NIKON LU PLAN 5X/0.15 A /0 BD WD 18 RED STRIPE NIKON LU PLAN 10X/0.30 A /0 BD WD 15 YELLOW STRIPE NIKON LU PLAN 20X/0.45 A /0 BD WD 4.5 GREEN STRIPE EYEPIECES: CFIUW 10X/25 ULTRA-WIDE FIELD 100W HALOGEN LIGHTING BRIGHTFIELD/DARKFIELD ILLUMINATION C-MOUNT CAMERA PORT ADAPTER COARSE/FINE FOCUS CONTROLS ON BOTH SIDES FOCUSING TARGET TO GET YOU "CLOSE" MOTORIZED APERTURE/FIELD ADJUSTABLE LAMP ADJUSTABLE INTERPUPILLARY DISTANCE, DIOPTER ADJUST ON BOTH EYES 8X8 STAGE HAS 8"X8" TRAVEL, WITH 8X20CM INSERT PLATE STAGE HAS DISCONNECT TO PREVENT ACCIDENTAL CONTROL STALK INPUTS POWER REQUIREMENT: 100-120V 50/60HZ 2.4A SKU: Y11D003 3B-01-02(1) 180LBS - 40IN X 40IN X 40IN

[BARRY CONTROLS ISOLAIR SYSTEM 3-ZONE AUTOMATIC VIBRATION ISOLATION PLATFORM AIR] MANUFACTURER: BARRY MODEL: ISOLAIR CONDITION: USED. THIS SYSTEM IS IN GOOD OVERALL COSMETIC CONDITION WITH MINOR BLEMISHES FROM PRIOR USE. THERE ARE LIGHT SCUFFS/SCRATCHES AND OILY RESIDUES HERE AND THERE, BUT MOSTLY IT LOOKS PRETTY GOOD EVEN UP CLOSE. NOTE: THIS CAME IN A CRATE MARKED LMS 2020, WHICH IS A METROLOGY MACHINE FOR LITHOGRAPHY, AN OPTICAL MASK COMPARATOR TYPE OF SYSTEM. NOTHING ELSE RELATED TO THAT SYSTEM IS INCLUDED IN THIS LOT! THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WHEN AIR IS PUT TO THE INLET FITTING AND THE VALVE OPENED, ALL FOUR ISOLATORS LIFT THE PLATFORM TO THE SET HEIGHT. THE HEIGHT OF THE PLATFORM IS AUTOMATICALLY REGULATED VERY QUICKLY TO COMPENSATE FOR LOAD CHANGES. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) BARRY ISOLAIR VIBRATION ISOLATION SYSTEM SPECIFICATIONS: MANUFACTURER: BARRY CONTROLS ISOLAIR VIBRATION ISOLATION SYSTEM 3-ZONE AUTOMATIC HEIGHT AND VIBRATION CONTROL PNEUMATIC ISOLATION AUTOMATIC OVER-HEIGHT RELIEF VALVES AIR PRESSURE GAUGES FOR INPUT AND PER-ZONE PRESSURES INPUT CUTOFF VALVE OVERALL OUTSIDE DIMENSIONS: JUST OVER 46" X 38" X 24"H TOP PLATFORM WITH CROSS BEAMS IS REMOVABLE SO YOU CAN FIT YOUR OWN TABLE ADJUSTABLE ISOLATED PLATFORM HEIGHT ADJUSTABLE HEIGHT FEET HANDWHEEL CRANKS CASTERS UP AND DOWN TO ALLOW THE SYSTEM TO REST ON ITS FEET HEAVY STEEL FRAME SKU: V05D008 5A-06-04(1) 470LBS - 54IN X 46IN X 32IN

[HAMAMATSU PHOTONICS A6089-01] SWITCHING INPUT/OUTPUT 50-SWITCH BOX I/O - MANUFACTURER: HAMAMATSU PHOTONICS MODEL: A6089-01 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS SWITCHING BOX IS IN GOOD CONDITION WITH A FEW MINOR SCUFFS AND SCRATCHES FROM NORMAL USE, BUT NOTHING MAJOR OR ANYTHING THAT WOULD AFFECT FUNCTION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SWITCHING BOX WAS REMOVED FROM A WORKING SYSTEM THAT WAS BEING DECOMMISSIONED, BUT WAS NOT TESTED SEPARATELY AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HAMAMATSU PHOTONICS A6089-01 SWITCHING BOX SPECIFICATIONS: MANUFACTURER: HAMAMATSU PHOTONICS MODEL: A6089-01 DESCRIPTION: SWITCHING BOX # OF SWITCHES: 50 SWITCHES SWITCH TYPE: 3-POSITION TOGGLE TOTAL WEIGHT: 2.25 LBS. CONDITION: USED QUANTITY: 1 SKU: O14P012 1D-17-03(1) 4LBS - 15IN X 12IN X 6IN

GGB INDUSTRIES PICOPROBE 12C-1-22 REPLACEMENT TUNGSTEN TIP FOR MICROPOSITIONER PROBE. MANUFACTURER: GGB INDUSTRIES MODEL: 12C-1-22. PROBE TIPS ARE IN NEW CONDITION. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). SPECIFICATIONS: MANUFACTURER: GGB INDUSTRIES MODEL: PICOPROBE 12C-1-22 INPUT CAPACITANCE: 0.1PF INPUT RESISTANCE: 1.0 MEGOHM RISE/FALL TIME: 0.8NS BANDWIDTH: DC TO 500 MHZ LINEARITY: 0.5% VOLTAGE RANGE: -10 TO +20V GAIN ACCURACY: 3% SIGNAL ATTENUATION: (HIGH INPUT IMPEDANCE OSCILLOSCOPE) 10 TO1 (50 OHM INPUT) 20 TO 1 TUNGSTEN WIRE SHAFT DIAMTER: 22 MICRON POINT DIAMTER: <0.2 MICRON

[SOLID STATE COOLING SYSTEMS] SWITCHBACK 6600 CE POWER SUPPLY/TEMPERATURE CONTROLLER. HIGH EFFICIENCY (95%), 6.9 KW BIPOLAR CURRENT-CONTROLLED PRECISION POWER SUPPLY. VARIABLE DC OUTPUT VOLTAGE FROM 0 TO 230V. VARIABLE DC CURRENT FROM 0 TO 30 AMPS. CAN BE SET UP FOR EITHER CURRENT (4-20 MA) OR VOLTAGE (0-5 VDC) CONTROL. MAXIMUM VOLTAGE OUTPUT: 230V (CONFIGURED FOR 30V). MAXIMUM CURRENT OUTPUT; 30A. WEIGHT: 32LBS. DIMENSIONS: 23IN X 23IN X 11IN.

TEKTRONIX TLA7XM TLA7016 6-SLOT BENCHTOP LOGIC ANALYZER MAINFRAME NO POWER-PARTS. MANUFACTURER: TEKTRONIX MODEL: TLA7XM. THIS MAINFRAME IS IN FAIR COSMETIC CONDITION WITH LIGHT SCUFFS/SCRATCHES AND LOTS OF RESIDUE ON TOP FROM ADHESIVE TAPE. WHEN THE POWER IS SWITCHED ON, NOTHING HAPPENS. WE ARE NOT SURE WHAT MAY BE WRONG WITH THIS UNIT. NO OTHER TESTING WAS DONE. THIS IS BEING SOLD AS/IS FOR PARTS OR REPAIR ONLY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) TEKTRONIX TLA7016 MAINFRAME. SPECIFICATIONS: MANUFACTURER: TEKTRONIX MODEL: TLA7XM, UPGRADED TO TLA7016 LOGIC ANALYZER FRAME BENCHTOP MAINFRAME ACCEPTS UP TO 6 TLA MODULES NOT WORKING, SOLD AS-IS. 54LBS - 36IN X 25IN X 19IN

[3M 992X-0600-LW00-H] BAR IONIZER STATIC CONTROLLER 24VDC 150MA 0.01-0.50MPA 24" - MANUFACTURER: 3M MODEL: 992X0600-LW00-H DESCRIPTION: BAR IONIZER STATIC CONTROLLER 24VDC 150MA 0.01-0.50MPA 24" SKU: X38H002 1B-20-01(4) 4LBS - 30IN X 8IN X 4IN

[WELLS CTI 7012-080-1-08A-712C] OPEN-TOP IC TEST SOCKET QFP (12) - MANUFACTURER: WELLS CTI MODEL: 7012-080-1-08A-712C CONDITION: NEW OTHER. COMES IN NONORIGINAL PACKAGING. THESE SOCKETS ARE IN UNUSED CONDITION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (12) WELLS-CTI 7012-080-1-08A-712C OPEN-TOP QFP TEST SOCKET SPECIFICATIONS: MANUFACTURER: WELLS-CTI PART #: 7012-080-1-08A-712C SOCKET TYPE: QFP (OPEN-TOP) LEAD FORM: 2.0MM MS-026 LEAD COUNT: 80 PITCH: 0.50 MM DIMENSIONS: LENGTH: 35.3 MM WIDTH: 35.3 MM SKU: T43A015 4B-04-02(1) 3LBS - 10IN X 10IN X 10IN

2004 COHERENT STARCII-I-LINE-KLA AR LASER HEAD 0.45W W/ CABLES & HOSES. MANUFACTURER: COHERENT MODEL: STARCII-I-LINE-KLA INNOVA I-LINE LASER MODULE KLA TENCOR P/N: 750-321825-004 P/N: 1094775 CLASS IIIB ARGON LASER 0.45 WATTS MAXIMUM OUTPUT POWER WATER COOLED MODEL I70 STARTER P/N: 0171-543-00 LASER TUBE: ARMSTRONG MODEL 1033239 LASER TUBE DATE: 2006 STAR II MOTOR BOARD: 0167-121-00 MOTOR BOARD: 0166-702-00 SOME LONG THING MOUNTED UNDER THE TUBE MARKED MODEL SLX. CONDITION: FOR PARTS OR NOT WORKING. COSMETIC CONDITION: FAIR. SCUFFS/SCRATCHES ALL OVER OUTSIDE, AND MINOR RESIDUES IN THE COOLANT FITTINGS. SOME ELECTRICAL CONTACTS ARE VISIBLY BURNED. HOURS METER IS OFF/BLANK. U45 ICU IS NOT INCLUDED. COULD NOT ALIGN THROUGH M1/M2. SOLD AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SKU: T02D026 5A-06-02(1) 155LBS - 58IN X 36IN X 28IN

[AGILENT TECHNOLOGIES 61384-01] PCB POWER ASSEMBLY BOARD FOR STRATAGENE ROBOCYCLER. MANUFACTURER: AGILENT MODEL: 61384-01 TYPE: PCB POWER ASSEMBLY BOARD COMPATIBLE WITH: STRATAGENE ROBOCYCLER SKU: L52F002 1B-15-03(3) 5LBS - 16IN X 13IN X 7IN

[HONEYWELL FLUKA 34828-40ML HYDRANAL WATER STANDARD 1.0 AMPOULES] MANUFACTURER: HONEYWELL MODEL: 34828-40ML HYDRANAL WATER STANDARD 1.0 AMPOULES WATER CONTENT: 1MG/G=0.1% BOILING POINT/RANGE: 153-155 C COLOR: COLORLESS FLASHPOINT: 43 C FORM: LIQUID PARTITION COEFFICIENT:: 2.11 INSOLUBLE HAZARD CLASS: 3 FLAMMABLE SKU: V28B011 1E-10-02(1) 2LBS - 12IN X 6IN X 4IN

[AGILENT E6175A] VXI BUS LOAD CARD 8 CHANNELS 7.5A (15A PEAK) WITH TRANSDUCER. MANUFACTURER: AGILENT TECHNOLOGIES, MODEL: E6175A (E6175-81000), LOAD CARD, 8 CHANNELS MAXIMUM, 4 CHANNELS WHEN USING UNSHARED RELAYS, FOR VXI BUS, 2 SLOTS WIDE, MAXIMUM CURRENT PER CHANNEL: 7.5 A (15 A PEAK), INDIVIDUALLY FUSED CHANNELS, CURRENT TRANSDUCER FOR CURRENT MEASURING, REMOVABLE ALUMINUM HEAT SPREADER WITH CONNECTOR, FOR CUSTOM LOADS. ORIGINALLY INSTALLED IN TS-5400 FUNCTIONAL TEST SYSTEM. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS CARD IS IN FAIR COSMETIC CONDITION, WITH MINOR SCUFFS/STAINS AND LABELS ON THE FRONT FROM PRIOR USE. THE HEAT SPREADER/MOUNTING PLATE BEHIND THE FRONT PANEL ON THE UNIT YOU RECEIVE MAY HAVE HOLES OR HEATSINK COMPOUND RESIDUE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS CARD WAS REMOVED FROM A DECOMMISSIONED SYSTEM AND NOT TESTED SEPARATELY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT E6175A LOAD CARD.

KEWAUNEE H05E 6 FT LABORATORY FUME HOOD W/ STAND 72" X 36.5" X 108.5" NO SIDES - MANUFACTURER: KEWAUNEE MODEL: H05E CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS VENT HOOD IS IN USED CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE. THE UNIT IS MISSING ONE LIGHT BULB, AND THE HOOD IS MISSING BOTH SIDE PANELS AND THE TOP FRONT AND TOP SIDE PANELS. THIS UNIT DOES NOT HAVE A FAN SYSTEM AND WILL NEED TO HAVE THAT HOOKED UP EXTERNALLY ON THE TOP. SEE PIC 5 FOR THE TOP VIEW OF THE FAN HOLE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS UNIT DOES NOT COME WITH A FAN/ EXHAUST SYSTEM AND WILL NEED TO BE PURCHASED AND INSTALLED SEPARATELY. SEE PIC 4 FOR THE TOP VIEW OF THE HOLE WHERE THE EXHAUST CONNECTS. WE CONNECTED 115VAC TO THE LIGHTS AND LET THEM RUN FOR A COUPLE OF MINUTES. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) KEWAUNEE H05E 6 FT LABORATORY FUME HOOD W/ STAND 72" X 36..5" X 108.5" NO SIDES SPECIFICATIONS: MANUFACTURER: KEWAUNEE MODEL: H05E DESCRIPTION: FUME HOOD EPOXY RESIN COUNTER TOP 7 - TURN HANDLES & MATCHING AIR/GAS LINE HOOK-UP NOZZLES FRONT GLASS DOOR (CABLE WEIGHT CONTROLLED) 1 - INTERNAL FLUORESCENT LIGHT DIMENSIONS: PUT TOGETHER W/ STAND: HEIGHT: 108 1/2" LENGTH: 72" DEPTH: 36 1/2" WITHOUT STAND: HEIGHT: 74 1/2" LENGTH: 72" DEPTH: 36 1/2" STAND DIMENSIONS: HEIGHT: 34" LENGTH: 72" DEPTH: 22" INTERNAL ENCLOSURE DIMENSIONS: HEIGHT: 46" LENGTH: 64" DEPTH: 24 1/2" POWER: 115 VAC 60 HZ SKU: X07O003 6-BILR2(1) 1350LBS - 80IN X 82IN X 75IN

[HP 6624A SYSTEM DC POWER SUPPLY] FOUR, 40 WATT OUTPUTS MAXIMUM OUTPUTS: CHANNELS 1 & 2: 7V 5A / 20V 2A CHANNELS 3 & 4: 20V 2A / 50V 0.8A TWO RANGES FOR EACH OUTPUT (0-7V AND 0-20V, 0-20V AND 0-50V) INDIVIDUALLY PROGRAMMABLE OUTPUTS REMOTE SENSE CAPABLE GPIB COMMUNICATIONS SIDE HANDLES (NO FEET) POWER INPUT REQUIREMENT: 100/120/220/240 50/60HZ. THIS POWER SUPPLY IS IN FAIR COSMETIC CONDITION WITH LOTS OF MINOR SCUFFS/SCRATCHES/STAINS FROM PRIOR USE. THERE IS AN EXTREME AMOUNT OF DUST INSIDE THIS UNIT. THE PLASTIC BRACKETS THAT HIDE THE ENDS OF THE HANDLES ARE CRACKED AND BROKEN. SEVERAL OUTPUT TERMINAL SCREWS ARE MISSING. THE TOP/REAR CORNERS OF THE FACEPLATE ARE BROKEN. THE TABS THAT MOUNT THE FACEPLATE TO THE CHASSIS ARE BROKEN. THERE IS SOME DUST INSIDE THE FRONT PANEL THAT IS A SLIGHT DISTRACTION WHEN VIEWING THE DISPLAY. THE FAN HAS BEEN REMOVED. THE KEYBOARD HAS SOME KEYS THAT DON'T WORK, AND THE REST ALL REQUIRE AN EXTRA-FIRM PRESS TO ACTUATE. SEVERAL KEYS GIVE MULTIPLE INPUTS PER PRESS. WE TESTED ALL FOUR CHANNELS AND VERIFIED THEY WILL GIVE VOLTAGE AT NO LOAD, BUT WE COULDN'T GET THE ZERO OR 1 KEYS TO DO RIGHT, SO WE TESTED THE OUTPUTS AT 9V AND 49V. THE DISPLAY WORKS. THE FAN DOES NOT WORK. WE ARE NOT ABLE TO TEST THE HP-IB INTERFACE. NO OTHER TESTING WAS DONE. THIS IS BEING SOLD AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 6624A SYSTEM DC POWER SUPPLY

AGILENT 66309D DUAL OUTPUT MOBILE COMMUNICATIONS DC SOURCE POWER SUPPLY - FOR PARTS OR NOT WORKING. THIS SOURCE IS IN FAIR COSMETIC CONDITION WITH SCUFFS/SCRATCHES AND ADHESIVE LABEL RESIDUES FROM PRIOR USE. THE BOTTOM HAS SOME LONG "RACK RASH" TYPE SCRATCHES. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. THIS SOURCE HAS PROBLEMS ON BOTH CHANNELS, BUT BOTH CHANNELS GIVE OUTPUT TO FULL VOLTAGE AND CURRENT. THE OUTPUT FROM CHANNEL 1 IS PRETTY ACCURATE TO OUR METER AND HOLDS STEADY, BUT AT OUTPUTS OVER 11 VOLTS WITH ANY CURRENT DRAWN, THE VOLTAGE METER GIVES AN OVERLOAD INDICATION, WHILE STILL GIVING THE SET VOLTAGE AND CURRENT. CHANNEL 2 DOESN'T GIVE OVERLOAD INDICATIONS, BUT THE VOLTAGE OUTPUT (ON OUR METER) JUMPS ALL OVER THE PLACE, WITHIN THE RANGE OF ABOUT A HALF VOLT WHILE THE DISPLAY ON THE SUPPLY HOLDS STEADY. THE FAN RAMPS UP WHEN CURRENT OUTPUT INCREASES. THE GPIB, DBM, REMOTE, INH OR FLT CONNECTIONS WERE NOT TESTED. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT 66309D DC SOURCE SPECIFICATIONS: MANUFACTURER: AGILENT TECHNOLOGIES MODEL: 55309D MOBILE COMMUNICATIONS DC SOURCE DUAL OUTPUT POWER SUPPLY OUTPUTS: 0 ... 15 V, 0 ... 3 A, 0 ... 12 V, 0 ... 1.5 A. GPIB IEEE-4888 AND REMOTE INTERFACES. ADAPTIVE FAN SPEED FOR QUIET OPERATION AT LOW POWER. SOLD AS-IS NOT WORKING RIGHT!

[HP 6032A] SYSTEM DC POWER SUPPLY 1000W 0-60V 0-50A 120VIN HPIB FAULTY - PARTS - MANUFACTURER: HEWLETT PACKARD HP MODEL: 6032A CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN FAIR COSMETIC CONDITION, WITH LOTS OF MINOR SCUFFS/SCRATCHES AND RESIDUES FROM PRIOR USE. THE MAIN INPUT COVER IS MISSING FOUR SCREWS, BUT THE ONE CENTRAL SCREW STILL HOLDS THE COVER IN POSITION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SUPPLY IS IN PARTIAL WORKING CONDITION. THE PREVIOUS OWNER SAID THE HP-IB INTERFACE DOESN'T WORK WHEN THE UNIT IS HOT. WE ARE NOT ABLE TO TEST HP-IB INTERFACES. WHEN WE FIRST TESTED THIS, WE STARTED AT 10V AND INCREASED THE CURRENT DRAW TO ABOUT 16 AMPS, AND IT SHUT OFF THE OUTPUT. WE SWITCHED OFF OUR LOAD. OVERRANGE, DISABLED AND OT LIGHTS STARTED FLASHING AND THE VOLTS AND AMPS BECAME ERRATIC, SHOWING FROM 0 TO 5V AND 0 TO 0.5A. THEN IT CALMED DOWN AND SHOWED A STEADY 10V UNTIL WE APPLIED A LOAD AGAIN, AND IT FREAKED OUT AGAIN. THE SUPPLY WAS PICKED UP AND SHAKEN, AND A RATTLY NOISE WAS HEARD - WE OPENED IT, AND EVENTUALLY, A NUT (THAT DIDN'T LOOK LIKE IT BELONGED IN THERE) FELL OUT. WE BLEW OUT A MODERATE AMOUNT OF DUST, RESEATED THE FET AND DIODE HEATSINK CARDS, PUT IT ALL BACK TOGETHER AND ... IT WORKS. WE WERE ABLE TO SINK 20A AT 60V, 40A AT 30V, AND 50A AT 10V, WITH NO DIFFICULTIES, FOR A COUPLE OF MINUTES' TESTING. MAYBE SOME DUST WAS MAKING AN INTERMITTENT FAULT, MAYBE THE NUT WAS DOING SOMETHING NUTTY, MAYBE SOMETHING ELSE WAS BAD IN THERE, BUT WE ARE OFFERING THIS SUPPLY FOR SALE AS-IS. THE DISPLAY IS BRIGHT AND CLEAR, AND THE CONTROLS RESPONDED NORMALLY TO USER INPUT. THE FAN RUNS. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 6032A POWER SUPPLY SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: 6032A SYSTEM POWER SUPPLY HP-IB COMMUNICATIONS/PROGRAMMING (FAILED!) OUTPUT: 0 TO 60V DC, 0 TO 50 AMPS, 1064 WATTS MAX. INPUT: 120V 48-63HZ 24A MAX. NOT WORKING PROPERLY! SOLD AS-IS! SKU: Y34D001 2B-04-01(1) 40LBS - 23IN X 23IN X 10IN

[ERLAB CAPTAIR XL-1044 FUME ENCLOSURE & HOOD] MANUFACTURER: ERLAB MODEL: XL 1044 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS ITEM IS IN GOOD COSMETIC CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM REGULAR USE BUT NOTHING THAT WOULD AFFECT FUNCTIONALITY. THE FILTER IN THIS IS IN NEW CONDITION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS FUME HOOD WAS PLUGGED IN AND TURNED ON. THE FANS ENGAGED AND IT APPEARED TO FUNCTION AS INTENDED. NO FURTHER TESTING WAS PERFORMED. IMAGE 7 IS THE AIRFLOW READING WITH FILTERS INSTALLED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CAPTAIR XL 1044 FILTAIR 115V DUCTLESS FILTERING FUME ENCLOSURE & FUME HOOD SPECIFICATIONS: MANUFACTURER: ERLABS, CAPTAIR MODEL: XL 1044 DESCRIPTION: DUCTLESS FILTERING FUME ENCLOSURE NEW FILTER DIMENSIONS: EXTERNAL: HEIGHT: 50" LENGTH: 39" DEPTH: 28" INTERNAL ENCLOSURE DIMENSIONS: HEIGHT: 39" LENGTH: 35" DEPTH: 27" FUME HOOD POWER: 115 VAC 60 HZ 50 W SKU: X43G002 1B-07-05(1) 310LBS - 48IN X 40IN X 58IN

KEYENCE SJ-H036A ULTRA HIGH-SPEED IONIZER BAR STATIC ELIMINATOR 14" 360MM 24VDC. THIS IONIZER BAR IS IN GOOD COSMETIC CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM REGULAR INDUSTRIAL USE AND COMES IN NON-ORIGINAL PACKAGING. THIS IONIZER BAR WAS REMOVED FROM DECOMMISSIONED EQUIPMENT AND HAS NOT BEEN TESTED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) KEYENCE SJ-H036A ULTRA HIGH-SPEED IONIZER BAR STATIC ELIMINATOR 360 MM SPECIFICATIONS: MANUFACTURER: KEYENCE MODEL: SJ-H036A DESCRIPTION: IONIZER BAR STATIC ELIMINATOR INPUT: 24VDC; 500MA 36VDC; 350MA CLASS 2 OR LPS ONLY OUTPUT: +/-7KV SKU: Y15G008 1B-07-02(1) 3LBS - 17IN X 8IN X 4IN

[KINETIC SYSTEMS] VIBRAPLANE 110X98CM VIBRATION ISOLATION/HEIGHT LEVELING TABLE PNEUMATIC - MANUFACTURER: KINETIC SYSTEMS KS MODEL: 390238-01-0082. THIS TABLE IS IN FAIR COSMETIC CONDITION WITH LOTS OF MINOR SCUFFS/SCRATCHES FROM PRIOR USE. THE TABLE TOP, ESPECIALLY THE UPPER CORNERS, HAS SOME RUBBING THROUGH THE FINISH. ALL OF THE RUBY-I EQUIPMENT EXCEPT THE PNEUMATICS FOR THE TABLE HAVE BEEN REMOVED, AND SEVERAL MOUNTING AND BOLT HOLES ARE LEFT BEHIND. THE STAGE PLATE CLAMPS HAVE SOME PADS AND HOLD-DOWN FINGERS MISSING. THE TABLE IS IN GOOD WORKING CONDITION EXCEPT FOR ONE IMPORTANT "BUT" ... BUT ONE OF THE TOP-HEIGHT REGULATORS IS BROKEN. THE FITTING ON BOTTOM AND THE ARM ON TOP OF THE REGULATOR ARE BOTH SNAPPED-OFF, SO THE TABLE WAS REPLUMBED TO HAVE ONLY 2 ZONES OF HEIGHT REGULATION, EFFECTIVELY LEFT/RIGHT OR FRONT/BACK. WHEN AIR IS APPLIED AND ALL THREE SWITCHES ARE ON, THE TABLE TOP LIFTS AND THE HEIGHT IS AUTOMATICALLY REGULATED BY THE REGULATORS BENEATH, AND THE FRAME IS LIFTED OFF THE WHEELS SO THE TABLE CAN'T ROLL AROUND. WHEN THE SWITCHES ARE OFF, THE TABLE RESTS ON FOUR RUBBER BUMP-STOPS ON TOP OF THE FRAME, AND THE FRAME ROLLS EASILY ON ITS CASTERS. NO OTHER TESTING WAS DONE. INCLUDED: (1) KS VIBRAPLANE VIBRATION ISOLATION TABLE SPECIFICATIONS: MANUFACTURER: KINETIC SYSTEMS INCORPORATED (FOR DCG SYSTEMS) MODEL: 390238-01-0082 VIBRAPLANE VIBRATION ISOLATION TABLE ISOLATES THE TOP PLATFORM FROM VIBRATIONS VIA AIR SUSPENSION 2-ZONE AUTOMATIC HEIGHT REGULATION ROLLS EASILY ON WHEELS, THEN LOCKS IN PLACE WITH AIR JACKS TO LIFT FRAME OFF THE WHEELS ALUMINUM TABLE TOP: ABOUT 110 CM X 98 CM X 1.5" THICK SIDES OF TOP SLOPE TOWARD THE MIDDLE, UNSLOPED AREA ABOUT 101 X 91 CM TOP HEIGHT FROM FLOOR (ON CASTERS, DEFLATED ISOLATORS): 79 CM RECTANGULAR OPENING IN TOP 61 X 51 CM ROUND WELL IN RECTANGULAR STAGE PLATE: 38 CM DIAMETER SQUARE OPENING IN ROUND STAGE PLATE: 8.5" SQUARE SWAG PRESSURE INDICATORS TURN GREEN WHEN AIR PRESSURE IS PRESENT KEY SWITCH FOR MAIN AIR INPUT MANUAL SWITCHES TO ENABLE FRAME LIFT AND TABLE LEVELING PNEUMATICS LOTS OF THREADED HOLES AND THREE WELLS IN TOP FOR MOUNTING YOUR EQUIPMENT THREADED HOLES UNDER TABLE EDGES AND AROUND OUTSIDE OF FRAME FORMERLY PART OF A DCG SYSTEMS RUBY-I MEASUREMENT SYSTEM DCG MODEL 20-101130-00 HEAVY! ABOUT 440 LBS. SKU: X39D014 5G-02-01(1) 545LBS - 52IN X 48IN X 40IN

2006 THERMO SCIENTIFIC 2006-0002 POLYPROPYLENE BOTTLES 60ML (120) - MANUFACTURER: THERMO SCIENTIFIC MODEL: 2006-0002 CONDITION: NEW. COMES IN ORIGINAL PACKAGING. THE BOTTLES ARE UNUSED. ONE BOX IS OPENED AND IS MISSING SOME QUANTITY FROM THE ORIGINAL. INCLUDED: (120) NEW THERMO SCIENTIFIC 2006-0002 POLYPROPYLENE BOTTLES 60ML SPECIFICATIONS: MANUFACTURER: THERMO SCIENTIFIC MODEL: 2006-0002 NARROW-MOUTH NALGENE BOTTLES CAPACITY: 2 OZ, 60 ML CAP/STOPPER SIZE: 20 MM CAP COLOR: NATURAL BOTTLE FINISH: TRANSLUCENT OUTER DIAMETER: 1.5", 3.8 CM OVERALL HEIGHT: 3" MATERIAL: POLYPROPYLENE

[VEECO FIB1-100 AFM PROBES] FOR USE WITH: VX & UVX AUTOMATED AFM CONDITION: NEW QUANTITY: 5 (1 PACK) SKU: M38P023 1A-02-02-01(1) 1LBS - 6IN X 6IN X 4IN

[AGILENT N6700B] 4-SLOT 400 WATT LOW-PROFILE 1U MPS MODULAR POWER SUPPLY MAINFRAME - MANUFACTURER: AGILENT TECHNOLOGIES MODEL: 6700B MODULAR POWER SUPPLY MAINFRAME COMPACT DIMENSION, LOW PROFILE ONLY 1U HIGH (4) SLOTS, ACCEPTS UP TO (4) N6700-SERIES DC POWER MODULES IN ANY COMBINATION UP TO 400 WATTS OUTPUT (DEPENDS ON INSTALLED MODULES) GPIB, ETHERNET AND USB INTERFACES LXI COMPLIANT BACKLIT LCD DISPLAY INPUT POWER: 100-240V 50/60/400HZ 1000VA MAXIMUM

[B.F. WEHMER MIXER] MIXER 1/3-HP W/ VACUUM DENTAL ORTHODONTIC - MANUFACTURER: B.F. WEHMER MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. IT HAS SCUFFS AND SCRATCHES FROM NORMAL USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WHEN POWER WAS APPLIED, THIS ITEM RAN VERY SMOOTHLY. IT WAS NOT TESTED UNDER A LOAD. NO FURTHER TESTING WAS PERFORMED. NOTE: THIS ITEM IS MISSING BOTH VACUUM CANISTERS AND THE GUAGE IS MISSING ITS FRONT COVER. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) B.F. WEHMER MIXER SPECIFICATIONS: MANUFACTURER: B.F. WEHMER MODEL: DOES NOT APPLY TABLE BASE DIMENSIONS: 9"D X 9-1/4"W DISTANCE BETWEEN TABLE BASE AND MOTOR SHAFT: 7-3/4" GE MOTOR: 1/3 HP 60 HZ SINGLE PHASE 1725 RPM FR: 48Y 115V 6.4 AMPS SKU: S43L015 1D-18-01(1) 41LBS - 25IN X 19IN X 14IN

[PACKARD GENPROBE MULTIPROBE 204 ROBOT MODEL C204400] PACKARD GEN-PROBE MULTIPROBE 204 LIQUID HANDLING ROBOTIC SYSTEM ROBOT HANDLER - MANUFACTURER: GEN-PROBE MODEL: MULTIPROBE 204 CONDITION: FOR PARTS OR NOT WORKING. THIS SYSTEM IS IN GOOD COSMETIC CONDITION, WITH MINOR BLEMISHES FROM PRIOR USE. THE BOTTLE BRACKET HANGING ON THE FAR-RIGHT END IS CRACKING. THIS SYSTEM IS MISSING AT LEAST A BUNCH OF HOSES AND A CONTROL COMPUTER. THE CABLE/HOSE GUIDE ON THE BACK IS BROKEN. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SYSTEM IS IN PARTIAL WORKING CONDITION. THE FOUR NOZZLES ON THE RIGHT, NEAR THE PUMP, MOVE UP/DOWN A LITTLE, AND THE FOUR HEADS ON THE GANTRY PULL THEMSELVES UP. NOTHING ELSE VISIBLY MOVES. WHEN POWER IS REMOVED, THREE OF THE HEADS DROP AND ONE HAS TO BE GENTLY NUDGED TO MAKE IT FALL. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) PACKARD GENPROBE MULTIPROBE 204 ROBOT MODEL C204400 SPECIFICATIONS: MANUFACTURER: PACKARD INSTRUMENT COMPANY GEN-PROBE MULTIPROBE 204 ROBOTIC SYSTEM LIQUID HANDLING ROBOT POWER: 100-120V 2A 60HZ NOT COMPLETE, NOT 100% WORKING! SKU: N35D017 5H-07-03(1) 334LBS - 67IN X 40IN X 40IN

[USED] JEOL LAMP ASSEMBLY FOR JSM-6400F FIELD EMISSION SCANNING ELECTRON MICROSCOPE WITH 6V2AGB-2 LIGHT BULB. THIS LAMP ASSEMBLY HAS MINOR SCUFFS AND SCRATCHES FROM NORMAL USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. THIS LAMP ASSEMBLY WAS NOT TESTED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SPECIFICATIONS: MANUFACTURER: JEOL MODEL: UNKNOWN DESCRIPTION: LAMP ASSEMBLY FOR JSM-6400F FIELD EMISSION SCANNING ELECTRON MICROSCOPE 6V2AGB-2 LIGHT BULB INCLUDED. WEIGHT: 4LBS - DIMENSIONS: 10IN X 10IN X 6IN

[UNBRANDED] FILTER WHEEL FOR (6) 1.80" OPTICAL FILTERS/ MIRRORED OPTICS, W/ SPARE. MANUFACTURER: UNBRANDED. MODEL: DOES NOT APPLY. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS FILTER WHEEL IS IN FAIR COSMETIC CONDITION WITH MINOR SCUFFS/SCRATCHES FROM PRIOR USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE WHEEL TURNS EASILY AND SNAPS INTO POSITION AT EACH LOCATION. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) UNBRANDED FILTER WHEEL FOR (6) 1.80" OPTICAL FILTERS/ MIRRORED OPTICS, (1) SPARE FILTER WHEEL. SPECIFICATIONS: MANUFACTURER: UNBRANDED. MODEL: DOES NOT APPLY. FILTER WHEEL STATION. ACCEPTS 1.80" FILTERS UP TO 4MM THICK. HAS AN ORBOT 710-34041-DD BOARD ATTACHED. THE ATTACHED WHEEL HAS MIRRORED LENSES ON. THE SPARE WHEEL HAS FILTERED LENSES.

(1) FXR/MICROLAB Y157A ISOLATOR SPECIFICATIONS: MANUFACTURER: FXR/MICROLAB MODEL: Y157A DB: 20 GHZ;12.4-18.0

[HP 53132A] HP 53132A UNIVERSAL COUNTER W/3GHZ OPTION 030 MOSTLY WORKS - PARTS - MANUFACTURER: HEWLETT PACKARD HP MODEL: 53132A CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS COUNTER IS IN FAIR COSMETIC CONDITION WITH MINOR SCUFFS/SCRATCHES AND STAINS FROM PRIOR USE. THE BUMPERS ARE DIRTIER THAN THE REST. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS COUNTER IS IN PARTIAL WORKING CONDITION. THE DISPLAY IS BRIGHT AND THE CONTROLS RESPONDED TO BUTTON PRESSES. WE WERE ABLE TO GET ALL CHANNELS TO REGISTER UP TO THEIR MAXIMUM RATED FREQUENCIES, CHANNEL 3 DOWN TO ITS MINIMUM, AND CHANNELS 1 AND 2 DOWN TO 10 HZ, THE LIMIT OF OUR GENERATOR. WE ARE NOT ABLE TO TEST THE HP-IB OR SERIAL INTERFACES. WE FOUND THAT ALL THE CHANNELS ARE ABLE TO REGISTER SIGNALS OF -10DBM WELL, BUT AT LOWER FREQUENCIES CHANNELS 1 AND 2 REQUIRED MUCH HIGHER INPUT SIGNALS, FROM ABOUT 0 DB AT 28KHZ TO EVEN AS HIGH AS 2 VOLTS TO GET DOWN TO 10HZ! WE ARE NOT SURE WHY. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1)A COUNTER SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: 53132A UNIVERSAL COUNTER (53132A 030) FREQUENCY RANGE: DC TO 225MHZ (CHANNELS 1&2), 100MHZ-3GHZ (CHANNEL 3) 12 DIGITS PER SECOND RESOLUTION 1-BUTTON MEASUREMENTS WITH HPIB & RS-232 COMMUNICATIONS INSTALLED OPTIONS 030: ADD CHANNEL 3, 100-3000MHZ BANDWIDTH SKU: X34D012 1E-05-03(1) 9LBS - 18IN X 12IN X 9IN

[KOKUSAI ELECTRIC] UO2000PMA MASTER MIKRO SONIC ULTRASONIC GENERATOR 1000W 1000KHZ. INPUT POWER: 208V 1PHASE 2080VA 60HZ. OUTPUT RATING: 1000W 1000KHZ. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS UNIT IS IN GOOD COSMETIC CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE. THE POWER LIGHT COMES ON WHEN POWER IS SWITCHED ON. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SKU: Y16S011 5I-09-03(1) 57LBS - 36IN X 25IN X 12IN

[HEWLETT PACKARD E1418A] 8/16 CHANNEL D/A CONVERTER WITH 75000 SERIES C CARRIER - MANUFACTURER: HEWLETT PACKARD HP MODEL: E1418A CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS CONVERTER IS IN FAIR COSMETIC CONDITION WITH SCUFFS/SCRATCHES/STAINS AND ADHESIVE LABEL RESIDUES FROM PRIOR USE. PLEASE NOTE: WE DO NOT KNOW HOW TO TELL WHETHER THIS IS 8- OR 16-CHANNEL, ISOLATED OR NON-ISOLATED, SORRY! THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE ARE NOT ABLE TO TEST THIS MODULE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP E1418A D/A CONVERTER SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: E1418A 8/16 CHANNEL DIGITAL TO ANALOG CONVERTER C-SIZE 1-SLOT VXI MODULE 8 OR 16 CHANNELS WITH 16-BIT D/AS FLEXIBLE AND CONFIGURABLE ABLE TO SET EACH CHANNEL TO CURRENT OR VOLTAGE MODE SKU: Y40D007 2C-01-03(1) 4LBS - 18IN X 12IN X 4IN

1981 THERMOTRON FM-16-CHM-5-5 ENVIRONMENTAL CHAMBER 480V - MANUFACTURER: THERMOTRON MODEL: FM-16-CHM-5-5 CONDITION: USED. THIS CHAMBER IS WELL WORN WITH A FEW FASTENERS ABSENT OR MANGLED. IT HAS BEEN REPAINTED AND IS A BIT OF AN UGLY DUCKLING, BUT LOVABLE NONETHELESS FOR ITS COOLING CAPACITY AND RAMP RATE. IT'S VERY WELL CONSTRUCTED. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE RAN THIS CHAMBER; IT ACHIEVED -25C FROM 20C IN FIVE MINUTES; A FURTHER SEVEN MINUTES RESULTED IN -50C. NINE MINUTES WERE REQUIRED TO REACH -60C FROM -50C. THE HEATER WORKS; IT DRAWS 6A AT 480V THREE-PHASE. THE STEAM GENERATOR SHOWS GOOD CONTINUITY. THE HUMIDITY SENSOR DOES NOT WORK AND THE HUMIDITY COIL DID NOT ENERGIZE WHEN WE ENABLED HUMIDITY IN THE CONTROL. THE HUMIDITY WATER FILL DOES WORK. A TAG BY THE DATA PLATE STATES A REFRIGERANT CONVERSION WAS PERFORMED IN 1995 FROM R13/R502 TO R23/R404A. AT THIS TIME A REFRIGERANT EXPANSION TANK WAS ADDED AT THE TOP OF THE CHAMBER. APPARENTLY, THE 4800 CONTROL IS ORIGINAL TO THIS UNIT; IT HAS SEVERAL OPTION CARDS INCLUDING GPIB. THE CHART RECORDER IS A TRULINE BY HONEYWELL; IT SEEMS TO WORK BUT WE DID NOT HAVE PAPER TO TEST IT WITH. A DESTACO LATCH WAS INSTALLED TO REMEDY A DOOR LEAK. NO MANUAL OR SHELVES ARE INCLUDED. A REFRIGERATION TECH WILL BE REQUIRED TO INSTALL THIS UNIT AS THE R404A COMPRESSOR RUNS PERIODICALLY TO KEEP LIQUID REFRIGERANT OUT OF THE SUCTION LINE. R404A LEAKDOWN IS VERY SLOW. THIS IS A NICE HIGH POWERED CHAMBER READY TO WORK. AN OLDIE BUT A GOODIE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) THERMOTRON FM-16-CHM-5-5 ENVIRONMENTAL CHAMBER SPECIFICATIONS: MANUFACTURER: MODEL: FM-16-CHM-5-5 DATE OF MANUFACTURE: 1981 REFRIGERATION HOURS: 99,000+ REFRIGERANT: R23/R404A POWER REQUIREMENT: 480V/24A THREE PHASE OTHER FACILITIES REQUIREMENTS: WATER FOR HUMIDITY SYSTEM. DRAIN. THERE'S NO AIR PURGE ON THIS CHAMBER. COOLING: WATER COOLED; 1" NPT CONNECTIONS ARE PROVIDED. THIS CHAMBER REQUIRES A FAIR AMOUNT OF WATER AT ROOM TEMP IN ORDER TO RUN AT FULL CAPACITY. INTERIOR DIMENSIONS: 23.5" WIDE, 36.5" DEEP, 32" HIGH COMPRESSORS: TWO COPELAND 5HP, BOLTED CONSTRUCTION. CHAMBER HEAT: 4.5KW STEAM GENERATOR: 4.5KW HUMIDITY SENSOR: WET WICK CONTROLLER: THERMOTRON 4800 SKU: T24X001 6-BILR1(1) 3200LBS - 102IN X 57IN X 106IN

ANRITSU MP1763C PULSE PATTERN GENERATOR 0.05 12.5 GHZ WITH OPTION 01 INTERNAL CLOCK POWER: 115V 47.5-63HZ 400VA MAXIMUM. THIS GENERATOR IS IN FAIR COSMETIC CONDITION WITH LOTS OF SCUFFS/SCRATCHES FROM PRIOR USE. THERE IS ONE SECTION OF A TOP CORNER THAT IS HEAVILY SCRATCHED/DENTED. THE FEET DO NOT ALL HAVE THEIR PLASTIC CLIPS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE ARE NOT FAMILIAR WITH THIS TYPE OF EQUIPMENT. WE COULD TELL FOR SURE THAT THE DETECTOR'S DELAY TIME WOULD INCREASE AND DECREASE WHEN THE GENERATOR'S DELAY TIME WAS INCREASED OR DECREASED. WE ARE NOT ABLE TO GIVE PROPER OPERATIONAL CHECKS. CONTROLS RESPONDED TO USER INPUTS BUT WE ARE NOT SURE WHAT THEY ARE SUPPOSED TO DO, SO WE ARE NOT SURE IF THEY RESPOND APPROPRIATELY. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ANRITSU MP1763C PULSE PATTERN GENERATOR SPECIFICATIONS: MANUFACTURER: ANRITSU MODEL: MP1763C PULSE PATTERN GENERATOR 0.05 12.5 GHZ WITH OPTION 01 INTERNAL CLOCK POWER: 115V 47.5-63HZ 400VA MAXIMUM SKU: X35D025 3B-02-01(1) 66LBS - 25IN X 25IN X 15IN

[APPLIED BIOSYSTEMS ABI] [GENEAMP PCR SYSTEM 9700] [N8050200] [96-WELL THERMAL CYCLER] - MANUFACTURER: APPLIED BIOSYSTEMS ABI MODEL: GENEAMP CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS CYCLER IS IN GOOD COSMETIC CONDITION WITH ONLY MINOR BLEMISHES FROM PRIOR USE. THERE ARE MINOR SCUFFS/SCRATCHES/STAINS ALL OVER INCLUDING LIGHT "CLEANING" SCRATCHES ON THE DISPLAY THAT DO NOT INTERFERE WITH USING THE INSTRUMENT. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS CYCLER IS IN GOOD WORKING CONDITION. WE REMOVED IT FROM A DECOMMISSIONED LAB AND GAVE IT A QUICK CHECK, VERIFYING IT STILL PASSES THE COOL AND HEAT RATE TEST AS WELL AS THE CYCLE PERFORMANCE TEST, THEN WE RAN A QUICK CUSTOM PROGRAM. EVERYTHING WORKED AS EXPECTED; NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ABI GENAMP PCR SYSTEM 9700 SPECIFICATIONS: MANUFACTURER: APPLIED BIOSYSTEMS MODEL: GENEAMP PCR SYSTEM 9700 P/N: N8050200 AUTOMATED THERMAL CYCLER 96-WELL SAMPLE BLOCK BLUE/WHITE LCD DISPLAY, PUSHBUTTON CONTROLS PCMCIA FLASH MEMORY CARD STORAGE/TRANSFER SLOT POWER: 100/120/220/230/240VAC 50/60HZ 725VA SKU: U51D012 3A-01-03(1) 30LBS - 25IN X 19IN X 14IN

[IKA T18 BASIC S1] LABORATORY STIRRER HOMOGENIZER - PARTS - MANUFACTURER: IKA MODEL: T18 BASIC S1 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS STIRRER IS IN FAIR COSMETIC CONDITION WITH MINOR BLEMISHES INCLUDING SCUFFS/SCRATCHES AND RESIDUES FROM PRIOR USE. THERE IS NO ATTACHMENT FOR THE END, AND WHAT LOOKS LIKE A DRIVE COUPLING IS HEAVILY WORN. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS STIRRER IS IN PARTIAL WORKING CONDITION. IT RUNS AT VARIABLE SPEED AS SET BY THE DIAL, BUT A FOUL ODOR COMES FROM THE AIR VENT AND IT SMELLS LIKE "BAD MOTOR" WHEN OPERATING. SOMETIMES, RANDOMLY, IT WILL MAKE A LOUD HOWLING NOISE. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) IKA T18 BASIC S1 STIRRER SPECIFICATIONS: MANUFACTURER: IKA MODEL: T18 BASIC S1 ULTRA TURRAX STIRRER VARIABLE SPEED 6000-30000 RPM POWER REQUIREMENT: 115V 50/60HZ 300W IP20 SMELLS BAD DURING OPERATION! SOLD AS-IS! SKU: Y14D004 2L-03-03(1) 4LBS - 12IN X 6IN X 6IN

NEW HAKKO T7/T15-1606 SOLDERING TIP FOR FM-202/FP-102 SPECIFICATIONS: PART #: T7/T15-1606 TIP SHAPE: GROOVED COAX FOR IRONS: HAKKO FM-203-HANDPIECE : HAKKO FM-2027(70W) HAKKO FM-204-HANDPIECE : HAKKO FM-2027(70W) HAKKO FX-950-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-951-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-952-HANDPIECE : HAKKO FM-2028(70W) HAKKO FM-202-HANDPIECE : HAKKO FM-2021(70W) OR HANDPIECE : HAKKO FM-2027(70W) NOTE: THE T15 TIPS HAVE REPLACED THE T7 TIPS. THE ONLY DIFFERENCE IS HAKKO HAS PHASED OUT THE BARCODE FROM THE TIPS. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN.

[HEWLETT PACKARD 6673A] SYSTEM DC POWER SUPPLY OUTPUT: 0-35V DC, 0-60A INPUT: 200-240V AC 50-60HZ 19A MAX. ANALOG VOLTAGE & CURRENT CONTROLS GPIB PROGRAMMABLE BUILT-IN MEASUREMENTS & ADVANCED PROGRAMMABLE FEATURES OUTPUT TERMINALS CAN BE FLOATED UP TO +240VDC ABOVE GROUND REMOTE SENSING CAPABLE WITH RACK MOUNTING HARDWARE INSTALLED. WORKS, SMOKE SMELL!-PARTS - MANUFACTURER: HEWLETT PACKARD HP MODEL: 6673A CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN FAIR COSMETIC CONDITION, THERE ARE SCUFFS/SCRATCHES/ADHESIVE LABEL RESIDUES FROM PRIOR USE. THERE ARE SMALL RUST SPOTS ON TOP FROM THE THING THAT USED TO BE SITTING ON THIS. THE PLASTICS AROUND THE LEFT SIDE OF THE FRONT PANEL ARE CRACKED/BROKEN. THE KNOBS ARE MISSING BUT THEIR SHAFTS WORK FINE. NOTE THERE IS NO MAIN POWER PLUG INSTALLED. THE POWER CABLE IS "SECURED" BY ZIP TIES AT THE REAR PANEL. THE HANDWRITTEN NOTE ON TOP SAYS "NO SIRVE" (DOESN'T WORK). THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SUPPLY IS IN PARTIAL WORKING CONDITION. WE WERE JUST ABOUT TO TAKE A PICTURE AT 35V, 60A OUTPUT, WHEN A POWERFUL SMELL OF ACRID ELECTRONIC MAGIC SMOKE CAME OUT! WE SHUT DOWN IMMEDIATELY. AFTER CALMING DOWN A BIT, WE RAN THE CURRENT TO 60V AT 5V AND IT SMELLED NORMAL. WE SET 35V AGAIN AND INCHED UP THE CURRENT, AND THE SMELL OF SMOKE CAME BACK AROUND 30A. WE DECIDED TO NOT TEMPT FATE AND PUSH CURRENT OUTPUT ANY HIGHER. AFTER SHUTTING OFF THE OUTPUT, VOLTAGE FALLS VERY SLOWLY, WHICH SEEMS BAD. THE DISPLAY IS A LITTLE LOW-CONTRAST BUT EASY TO READ. WHEN ASKED FOR ERRORS, IT SAYS "0". THE KEYBOARD AND BOTH KNOBS WORK. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 6673A POWER SUPPLY SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: 6673A SYSTEM DC POWER SUPPLY OUTPUT: 0-35V DC, 0-60A INPUT: 200-240V AC 50-60HZ 19A MAX. ANALOG VOLTAGE & CURRENT CONTROLS GPIB PROGRAMMABLE BUILT-IN MEASUREMENTS & ADVANCED PROGRAMMABLE FEATURES OUTPUT TERMINALS CAN BE FLOATED UP TO +240VDC ABOVE GROUND REMOTE SENSING CAPABLE WITH RACK MOUNTING HARDWARE INSTALLED SKU: Y40D001 2L-01-02(1) 62LBS - 36IN X 25IN X 10IN

[NEW] THERMO SCIENTIFIC 2003-0004 LDPE NALGENE LABORATORY BOTTLES 125ML. MANUFACTURER: THERMO SCIENTIFIC MODEL: 2003-0004 NARROW-MOUTH LDPE LABORATORY BOTTLES CAPACITY: 125 ML, 4 OZ. MATERIAL: LDPE CAP MATERIAL: POLYPROPYLENE CAP/STOPPER SIZE: 24 MM BOTTLE COLOR: TRANSLUCENT NON-AUTOCLAVABLE OUTER DIAMETER: 2" OVERALL HEIGHT: 4" BOTTLE MATERIAL: LDPE-LOW DENSITY POLYETHYLENE. CONDITION: NEW. COMES IN SEALED ORIGINAL PACKAGING. THE BOX HAS SOME MINOR DAMAGE FROM PREVIOUS STORAGE AND SHELF-WEAR. AN OPENED BAG OF BOTTLES WAS USED FOR PHOTO AND INSPECTION PURPOSES. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (72) NEW THERMO SCIENTIFIC 2003-0004 LDPE NALGENE LABORATORY BOTTLES 125ML. SKU: V31B027 5A-21-01(11) 9LBS - 25IN X 19IN X 16IN

VWR SCIENTIFIC PRODUCTS 210 4-1/8" X 5-3/8" TOP PLATE 371C MAX MINI HOT PLATE. MANUFACTURER: VWR SCIENTIFIC PRODUCTS. MODEL: 210. CAT NO: 33918-556. PART #: 947001. DESCRIPTION: MINI HOT PLATE. LINE VOLTAGE: 115VAC. CAST ALUMINUM TOP PLATE. PLATE DIMENSIONS: 4-1/8" X 5-3/8". LED HEAT INDICATOR. POWER CONSUMPTION: 325W. LINE FREQUENCY: 50/60HZ. MAX TEMPERATURE: 371C. CAPACITY: 2L OF LIQUID.

HEWLETT PACKARD 3314A FUNCTION GENERATOR SYNTHESIZER 20MHZ NO POWER - PARTS - MANUFACTURER: HEWLETT PACKARD HP MODEL: 3314A CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS GENERATOR IS IN FAIR COSMETIC CONDITION, WITH SCUFFS/SCRATCHES, AND RESIDUES ALL OVER OUTSIDE. THE ADJUSTMENT KNOB IS DAMAGED. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS GENERATOR IS NOT WORKING. THE FRONT PANEL DOES NOT LIGHT UP. THE FAN RUNS, BUT IT SOUNDS ABNORMAL. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 3314A FUNCTION GENERATOR SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL 3314A FUNCTION GENERATOR/WAVEFORM SYNTHESIZER FREQUENCY RANGE: 0.001HZ TO 19.99MHZ AMPLITUDE RANGE: 0.01MVPP TO 10VPP INTO 50 OHMS SINE/SQUARE/TRIANGLE WAVES LIN/LOG SWEEPS, GATE, COUNTED BURST, AM/FM/VCO ARBITRARY WAVEFORM GENERATOR PHASE LOCK XN AND /N MODES, 1/2-CYCLE MODE AUTORANGING OR HOLD RANGE DOES NOT POWER ON! SOLD AS-IS! SKU: Y33D019 1E-12-04(2) 18LBS - 22IN X 15IN X 10IN