Electronic Lab Test Measurement Equipment Day 1 of 3 day event

[ION SYSTEMS 5024(E)-CE] IONIZER CONTROLLER WITH [ION 5285E-28 AEROBAR] IONIZER EMITTER. CONTROLLER RATED .630A TIME-LAG FUSE. INPUT AC 100V 50HZ, 115V 60HZ, 230V 50HZ. OUTPUT: 24VDC. POWER: 8VA - PLUS 1 VA/EMITTER. IONIZER EMITTER INPUT: 24VAC. SKU: X50H014. WEIGHT: 9LBS. DIMENSIONS: 31IN X 8IN X 8IN.

[200L] HYDROLOGIX 3751-HR PURE 200 SOFTFIT~L 200L PIPET TIPS HR STERILE IN HINGED RACKS. 96 TIPS / TRAY, 10 TRAYS / BOX, 960 TIPS PER BOX, 5 BOXES PER CASE, 4800 TOTAL TIPS INCLUDED. NON-FILTERED. RACK COLOR GREEN. SPECIFICATIONS: MANUFACTURER: HYDROLOGIX, MODEL: 3751-HR, DESCRIPTION: PURE 200 SOFTFIT~L 200L PIPET TIPS HR STERILE IN HINGED RACKS. SKU: W44H028. WEIGHT: 20LBS. DIMENSIONS: 20IN X 20IN X 20IN.

NEW HAKKO T7/T15-1206 SOLDERING TIP FOR FM-202/FP-102 SPECIFICATIONS: PART #: T7/T15-1206 TIP SHAPE: QUAD SIZE: 22.5 X 16.5MM FOR IRONS: HAKKO FM-203-HANDPIECE : HAKKO FM-2027(70W) HAKKO FM-204-HANDPIECE : HAKKO FM-2027(70W) HAKKO FX-950-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-951-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-952-HANDPIECE : HAKKO FM-2028(70W) HAKKO FM-202-HANDPIECE : HAKKO FM-2021(70W) OR HANDPIECE : HAKKO FM-2027(70W) NOTE: THE T15 TIPS HAVE REPLACED THE T7 TIPS. THE ONLY DIFFERENCE IS HAKKO HAS PHASED OUT THE BARCODE FROM THE TIPS. SEE THE HAKKO PRODUCT BULLETIN.

[USTC RITMS CONTROLLER] [USTC MRPSS POWER SUPPLY] [USTC 101N61S THERMAL HEAD] [RITMS-MRPSS CABLE] USTC INTEGRATED THERMAL MANAGEMENT SYSTEM RITMS & MRPSS POWER SUPPLY FOR PARTS - MANUFACTURER: USTC MODEL: RITMS CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS LOT IS IN GOOD COSMETIC CONDITION WITH ONLY MINOR BLEMISHES FROM PRIOR USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THESE ARE NOT WORKING PROPERLY. WHEN THE THERMAL HEAD IS CONNECTED TO ANY CHANNEL AND THE CHANNEL IS SELECTED, THE CONTROLLER SAYS THE PWM BOARD FOR THAT CHANNEL DOES NOT RESPOND. WE ARE NOT SURE WHY. THE TH DOES NOT CHANGE TEMPERATURE. NO OTHER TESTING WAS DONE. POKING AROUND IN THE MENUS, WE RAN INTO A PASSWORD PROMPT. WE DON'T HAVE THE PASSWORD. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SPECIFICATIONS: MANUFACTURER: USTC MODEL: RACK INTEGRATED THERMAL MANAGEMENT SYSTEM (RITMS) 4 CHANNELS FOR UP TO 4 THERMAL HEADS AUTOMATICALLY CONFIGURES FOR DIFFERENT COOLING HEADS LCD DISPLAY WITH EASY MENU NAVIGATION ANALOG VOLTAGE OUTPUT TO TH MINIMIZES ELECTROMAGNETIC NOISE SOUND AND LED ALARMS FOR REAL-TIME, IMMEDIATE NOTIFICATIONS FOR ACTION MODULAR RACK POWER SUPPLY SYSTEM (MRPSS) CAN BE MOUNTED REMOTE OR SEPARATE FROM RITMS MODULAR FOUR CHANNELS INSTALLED SKU: P26D026 5B-08-01(1) 72LBS - 36IN X 25IN X 19IN

[HEWLETT PACKARD] HP 6032A SYSTEM DC POWER SUPPLY 1000W 0-60V 0-50A 120V BROKEN POWER INPUT -PARTS - MANUFACTURER: HEWLETT PACKARD HP MODEL: 6032A CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN FAIR COSMETIC CONDITION, WITH LOTS OF MINOR SCUFFS/SCRATCHES AND RESIDUES FROM PRIOR USE. THE MAIN INPUT TERMINAL COVER IS MISSING. THE VSENSE TERMINALS ARE LOOSE. THE SIDES ARE BENT ON THE BACK/BOTTOM. THERE IS A TAPE ON TOP, MARKED "DID NOT WORK IN BAY" WHICH WE ARE NOT SURE WHAT IT MEANS. PLEASE NOTE! THE DIVIDERS BETWEEN THE MAIN INPUT TERMINALS ARE BROKEN. OUR TECHNICIAN DESCRIBED THIS AS "HINKY", "SCARY," AND "UNSAFE" SO IT SHOULD DEFINITELY BE REPAIRED BEFORE RETURNING THIS POWER SUPPLY TO SERVICE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SUPPLY IS IN PARTIAL WORKING CONDITION. WE NOTED THAT, WITHOUT INCREASING THE CURRENT ADJUSTMENT, THE VOLTAGE WILL RISE WHEN INCREASED AND THEN FALL OFF. AFTER ADJUSTING THE CURRENT LIMIT TO ABOUT 0.1A, IT WAS ABLE TO INCREASE VOLTAGE NORMALLY. THIS SUPPLY WILL NOT BE FULLY ABLE TO SUPPLY AND MEASURE LOW-CURRENT OUTPUT! ONE TIME DURING TESTING, WE SWITCHED OFF AT 60V AND TURNED BACK ON AGAIN IMMEDIATELY, AND IT TOOK A LONG TIME (A MINUTE OR SO) FOR THE VOLTAGE TO FALL TO ZERO. THE FAN RUNS, BUT STARTED SLOWLY AND GRUMBLY UNTIL IT CAME UP TO SPEED. WE ARE NOT ABLE TO TEST GP-IB OPERATION. USING THE FRONT PANEL KNOB, WE VERIFIED IT CAN GIVE 20A AT 60V AND 50A AT 20V. CONTROLS RESPOND AS EXPECTED TO USER INPUTS. THE DISPLAYS ARE BRIGHT. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 6032A POWER SUPPLY SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: 6032A SYSTEM POWER SUPPLY HP-IB COMMUNICATIONS/PROGRAMMING OUTPUT: 0 TO 60V DC, 0 TO 50 AMPS, 1064 WATTS MAX. INPUT: 120V 48-63HZ 24A MAX. NOT WORKING PROPERLY! SOLD AS-IS! SKU: Y34D010 2B-03-03(1) 40LBS - 23IN X 23IN X 10IN

[HEWLETT PACKARD] [HP] [6629A] SYSTEM DC POWER SUPPLY 4 OUTPUTS 50W 0-16V/2A 50V/1A - MANUFACTURER: HEWLETT PACKARD HP MODEL: 6629A CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN FAIR COSMETIC CONDITION WITH MINOR BLEMISHES FROM PRIOR USE. THERE ARE SCUFFS/SCRATCHES/STAINS, A FEW SMALL DINGS HERE AND THERE, AND THE PLASTIC DIVIDER ON ONE CHANNEL'S OUTPUT TERMINAL IS A LITTLE BROKEN. ONE OF THE LITTLE WIRE-DIVIDER FINGERS ON A CLEAR PLASTIC OUTPUT COVER IS BROKEN OFF. THERE ARE NO FEET. THE DISPLAY COVER IS CLOUDY AND SCRATCHED BUT STILL EASY TO READ. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SUPPLY IS IN GOOD WORKING CONDITION. WE TESTED ALL CHANNELS TO FULL RATED CURRENT AND VOLTAGE ON BOTH RANGES AND ALL CHANNELS. THE DISPLAY IS CLEAR, AND THE CONTROLS RESPONDED TO FRONT PANEL BUTTON PRESSES AS EXPECTED. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 6629A POWER SUPPLY SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: 6629A SYSTEM DC POWER SUPPLY (4) 50W INDEPENDENTLY PROGRAMMABLE OUTPUTS 2 RANGES PER OUTPUT: 0-16V @ 0-2A OR 0-50V @ 0-1A WITH HP-IB (IEEE-488) PROGRAMMING/COMMUNICATIONS SOFTKEY FRONT PANEL CONTROLS REAR PANEL OUTPUTS REMOTE SENSE CAPABLE INPUT POWER: 100/120/220/240V 50/60HZ 6/3A FAST, LOW-NOISE OUTPUTS PRECISION LOW-CURRENT MEASUREMENTS

[BIO RAD 224 BR VARIABLE SPEED BUFFER RECIRCULATION PUMP] MANUFACTURER: BIO RAD MODEL: BUFFER RECIRCULATION PUMP DESCRIPTION: VARIABLE SPEED BUFFER RECIRCULATION PUMP 224 BR 100/120/220/240V 30A 50/60HZ NEW TUBING IS INCLUDED. THE TUBING CURRENTLY ATTACHED IS OLD AND DISCOLORED. THIS PUMP IS PARTIALLY WORKING. WE POWERED ON THIS PUMP AND OBSERVED AIR FLOWING OUT OF THE EXHAUST AND INTO THE INTAKE. THE VARIABLE ACTION ON THIS PUMP IS NOT FUNCTIONING. THE PUMP DOES NOT ENGAGE UNTIL IT IS TURNED UP TO THE HIGHEST LEVEL. BECAUSE OF THIS, IT IS BEING SOLD AS/IS FOR PARTS OR REPAIR ONLY. 9LBS - 12IN X 12IN X 12IN

[ULTRA-X RST PRO2] PCI RAM MEMORY STRESS TESTER PROFESSIONAL PC DIAGNOSTIC RSTPRO2 - MANUFACTURER: ULTRA-X MODEL: RSTPRO2 CONDITION: NEW OTHER. COMES IN NON-ORIGINAL PACKAGING.A THIS LOT IS IN GOOD COSMETIC CONDITION WITH MINOR 'SHELF WEAR' ON THE ANTI-STATIC PACKAGING.A THE CARD WHICH IS OUT OF BAG IN THE PHOTOS IS A TYPICAL UNIT THAT WAS NOT SEALED WHEN WE RECEIVED THESE; YOU WILL RECEIVE A SEALED CARD. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) RSTPRO2 TESTING CARD SPECIFICATIONS: MANUFACTURER: ULTRA-X, INC. MODEL: R.S.T. PRO2 MEMORY DIAGNOSTIC & VALIDATION TOOL WITH SERIAL PORT FOR DATALOGGING QUICKLY AND ACCURATELY TEST AND VALIDATE MEMORY IN DESKTOPS, SERVERS, AND WORKSTATIONS FOR USE WITH INTEL OR AMD X86 COMPATIBLE 32/64-BIT SINGLE OR MULTI-CORE PROCESSORS FOR BOTH BASE AND EXTENDED MEMORY TEST UP TO 64 GIGABYTES USES OVER 100 TEST PATTERNS AND ALGORITHMS GRAPHIC DISPLAY PINPOINTS EXACT LOCATION OF MEMORY FAILURES SUPPORTS THE LATEST SIMM, DIMM, RIMM SRAM, RDRAM (RAMBUS), ECC, FB-DIMM, PARITY AND NON-PARITY MEMORY TECHNOLOGIES SUPPORTS DDR-266/333/366/400/466/500, DDR2-533/667/800/1066 SELF-BOOT TECHNOLOGY TESTS MEMORY WITHOUT INTERFACE OF ANY DRIVER, TSR OR OPERATING SYSTEM LIMITATIONS SKU: N28D007 4B-03-04(4) 2LBS - 8IN X 8IN X 4IN

[TEKTRONIX 1740] WAVEFORM / VECTOR SCOPE ANALOG MONITOR - PARTS - MANUFACTURER: TEKTRONIX MODEL: 1740 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS WAVEFORM / VECTOR MONITOR IS IN AS/IS CONDITION WITH SCUFFS, SCRATCHES, AND STAINS FROM PREVIOUS USE. THE LEFT ONE POWERS ON BUT THE RIGHT ONE WON'T POWER ON UNLESS YOU HOLD DOWN THE POWER BUTTON, BUT EVEN THEN NOTHING COMES UP ON THE MONITOR. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE POWERED THE UNIT ON AND TURNED THE NOBS AND PRESSED THE BUTTONS. THE UNIT IS OLD AND DOESN'T SEEM TO BE FUNCTIONING PROPERLY SO IT IS BEING SOLD AS/IS FOR PARTS OR REPAIR. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) TEKTRONIX 1740 COMBINATION NTSC WAVEFORM MONITOR / VECTOR SCOPE AS/IS SPECIFICATIONS: MANUFACTURER: TEKTRONIX MODEL: 1740 DESCRIPTION: NTSC WAVEFORM MONITOR/ VECTOR SCOPE PRODUCT FAMILY 1740, 1740A, 1740-A, 1740 A, 1750A, 1750-A, 1750 A, 1760 MAINS VOLTAGE RANGE: 90--250 V MAINS FREQUENCY: 50 OR 60 HZ. POWER CONSUMPTION: 110 VA (67 WATTS) MAXIMUM; 102 VA (60 WATTS) TYPICAL INPUTS/OUTPUTS ANALOG COMPOSITE STANDARD NTSC SKU: W20O015 1E-07-03(1) 41LBS - 23IN X 23IN X 11IN

[GENTEC-EO UP25N-300W-H9-BT LASER POWER DETECTOR SENSOR 300W 25MM APERTURE] -PARTS - MANUFACTURER: GENTEC-EO MODEL: UP25N-300W-H9-BT CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS DETECTOR IS IN FAIR COSMETIC CONDITION WITH A FEW NOTABLE BLEMISHES FROM PRIOR USE. THE BNC CONNECTOR IS BROKEN. THERE WAS VISIBLE SURFACE RUST ON THE SCREW HEADS, SO WE POPPED THIS UNIT OPEN TO INSPECT THE INSIDES. IT LOOKS PRETTY OKAY EXCEPT FOR THE COOLANT PORTS, WHICH HAVE SOME CRUSTY BUILDUP IN THEM. WE BLEW COMPRESSED AIR THROUGH AND FOUND THEY PASS FLUID BUT THERE WILL LIKELY BE REMAINING CRUST INSIDE THE COOLANT LINE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE ARE UNABLE TO TEST THIS ITEM. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) GENTEC UP25N LASER POWER SENSOR SPECIFICATIONS: MANUFACTURER: GENTEC-EO MODEL: UP25N-300W-H9-BT UP SERIES THERMOPILE POWER DETECTOR APERTURE: 25 MM MAXIMUM AVERAGE POWER: 300 W ABSORBER: H - BROADBAND EXTERIOR DIMENSIONS: 89 MM WATER-COOLED, >1.5 LITER/MIN. BNC CONNECTOR FOR DIRECT CONNECTION TO OSCILLOSCOPE OR MICROVOLTMETER (DAMAGED) MOLEX CONNECTOR POWER NOISE RATING: 3 MW RISE TIME, TYPICAL: 5 S (1.3 S WITH ANTICIPATION) SKU: X04D008 1B-10-02(1) 4LBS - 8IN X 8IN X 4IN

[USED] STRYKER 277-100-100 OPERATING ROOM TWO-PEDAL WIRELESS ISWITCH FOOTSWITCH BOARD FOOTSWITCH BOARD PEDALS: 2 CONNECTION: WIRELESS FOR USE WITH: STRYKER TPS, CORE, SERFAS AND SERFAS ENERGY IPX7 7LBS - 16IN X 12IN X 8IN

[CAJON] ULTRA TORR VACUUM FITTINGS 1/4" SIZE (2) - MATERIAL: STAINLESS STEEL, TEMPERATURE RATING: -25 TO 400 F. [WEED INSTRUMENTS] 2443A RTD SENSORS - HIGH OUTPUT SIGNAL, 3 WIRE LEADS, TIME RESPONSE: 5 SECONDS. SKU: R46B003 2N-05-04(1)

[THOMAS] T23X LOW TEMPERATURE THERMOSTATIC WATER BATH 0-50*C 18L DIGITAL -PARTS - MANUFACTURER: THOMAS MODEL: T23X CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS BATH IS IN GOOD COSMETIC CONDITION OVERALL, WITH MINOR SCUFFS/SCRATCHES ALL OVER FROM PRIOR USE. THE PANELS DON'T FIT EXTREMELY WELL BUT THEY ARE ALL SCREWED FIRMLY IN PLACE. THE INLET/OUTLET FITTINGS ON THE LID ARE CORRODED UNDER THE LID. THIS IS BEING LISTED AS/IS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS BATH IS IN PARTIAL WORKING CONDITION. THE REFRIGERATION SYSTEM IS AN ALWAYS-ON SETUP. THE CONTROLLER WON'T COMMAND AN INTERNAL RELAY TO SWITCH ON THE REFRIGERATION, SO A JUMPER WAS SWITCHED OVER TO BYPASS THE RELAY. OTHERWISE IT WORKS AS EXPECTED. WE HEATED A BATH FULL OF WATER TO 50 DEGREES AND THEN FIGURED OUT IT WASN'T COOLING BECAUSE THE REFRIGERATION WON'T START. NEXT MORNING, WE BYPASSED THE RELAY AND THE REFRIGERATION RUNS QUIETLY ALL THE TIME. THE PUMP MAKES A QUIET GRUMBLING NOISE. THE CONTROLS RESPOND TO USER INPUTS AND THE DISPLAY IS EASY TO READ. WE SET THE TEMPERATURE FOR 4O TO AVOID FREEZING THE WHOLE THING UP SOLID WHEN TESTED WITH TAP WATER. NO OTHER TESTING WAS DONE. THIS IS BEING LISTED AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) THOMAS T23X BATH SPECIFICATIONS: MANUFACTURER:THOMAS MODEL: T23X THERMOSTATIC WATER BATH MIRROR-POLISHED STAINLESS STEEL REMOVABLE LID, TOP AND BATH AREA SETPOINT RANGE: 0OC TO 50OC DIGITAL CONTROLLER, SIMPLE OPERATION BATH OPENING: 40X35CM, 15CM DEEP USABLE VOLUME: APPROXIMATELY 18 LITERS APPROXIMATE OUTER DIMENSIONS: 22" X 17" X 17" R134 REFRIGERATION AIR-COOLED INBUILT HEATER POWER: 100V 50/60HZ 9A

[IZON SCIENCE Q5013 QNANO "BLUE" TUNABLE RESISTIVE PULSE SENSING TRPS INSTRUMENT W/ DAMAGED FLUID CELL AND VARIABLE PRESSURE MODULE] MANUFACTURER: IZON SCIENCE MODEL: Q5013 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS UNIT IS IN FAIR OVERALL COSMETIC CONDITION WITH MINOR SCUFFS/SCRATCHES FROM PRIOR USE. THE MAIN PROBLEM IS THAT THE FLUID CELL IS VISIBLY DAMAGED AND WILL NEED TO BE REPLACED. WE ARE NOT ABLE TO PROVIDE SUPPORT FOR THIS UNIT! THIS ITEM IS FOR SALE AS-IS! THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WHEN POWER IS APPLIED WITH A TEST SUPPLY (NOT INCLUDED) THE POWER LIGHT COMES ON STEADY GREEN. NO OTHER TESTING WAS DONE. THIS ITEM IS BEING SOLD AS-IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) IZON Q5013 QNANO TRPS INSTRUMENT (1) VARIABLE PRESSURE MODULE SPECIFICATIONS: MANUFACTURER: IZON SCIENCE LTD MODEL: Q5013 QNANO "BLUE" TUNABLE RESISTIVE PULSE SENSING TRPS INSTRUMENT FLUID CELL IS DAMAGED, THIS LOT IS OFFERED FOR SALE AS-IS! SKU: W03D002 3B-07-02(1) 18LBS - 16IN X 16IN X 14IN

HAKKO T7/T15-1205 SOLDERING TIP FOR FM-202/FP-102 SPECIFICATIONS: PART #: T7/T15-1205 TIP SHAPE: QUAD SIZE: 23.4 X 17.3 FOR IRONS: HAKKO FM-203-HANDPIECE : HAKKO FM-2027(70W) HAKKO FM-204-HANDPIECE : HAKKO FM-2027(70W) HAKKO FX-950-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-951-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-952-HANDPIECE : HAKKO FM-2028(70W) HAKKO FM-202-HANDPIECE : HAKKO FM-2021(70W) OR HANDPIECE : HAKKO FM-2027(70W) NOTE: THE T15 TIPS HAVE REPLACED THE T7 TIPS. THE ONLY DIFFERENCE IS HAKKO HAS PHASED OUT THE BARCODE FROM THE TIPS.

[DETECTUS AB RSE 642 RQ642EH 3D THERMAL SCANNING PLATFORM WITH OPTEX BA-06TA] MANUFACTURER: DETECTUS MODEL: RSE 642 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS ITEM IS IN GOOD OVERALL COSMETIC CONDITION WITH SOME BLEMISHES FROM PRIOR USE. THE WORST IS THAT A STOP SWITCH UNDER THE BOTTOM HAS BEEN SMASHED. PLEASE NOTE: THERE IS NO MODEL NUMBER BUT THIS UNIT APPEARS VISUALLY IDENTICAL TO THE RSE 642 MODEL ON DETECTUS' WEBSITE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS ITEM IS IN GOOD WORKING CONDITION AS FAR AS WE CAN TEST. WHEN POWER IS APPLIED, ALL THE AXES RESIST MOTION WHEN PRESSED WITH LIGHT HAND PRESSURE; WHEN POWER IS REMOVED, THEY MOVE MORE EASILY. THE THERMOMETER ALSO GIVES READINGS WHEN POWER IS APPLIED. NO OTHER TESTING WAS DONE. THIS IS BEING SOLD AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) DETECTUS RQ642EH 3D THERMAL SCANNER SPECIFICATIONS: MANUFACTURER: DETECTUS AB MODEL: RSE 642 TYPE: RQ642EH 3D SCANNING PLATFORM WITH THERMO-HUNTER BA-06TA NON-CONTACT INFRARED THERMOMETER MEASURABLE VOLUME: 600 X 400 X 200 MM MINIMUM STEP SIZE: 1MM MOVEMENT IN XYZ AXIS: 600 X 400 X 200 MM SIZE: 920 X 720 X 750 MM REQUIRES WINDOWS PC AND SPECIAL SOFTWARE TO OPERATE, NOT INCLUDED SMALL STEPPER MOTORS PULL TIGHT WIRES TO DRIVE EACH AXIS DUAL LINEAR MOTION GUIDE RAILS FOR EACH AXIS LIMIT SWITCHES ON ALL AXES POWER: 110V 60HZ 50VA SKU: U37D001 210LBS - 48IN X 40IN X 48IN

(1) ULINE H-1239W CLEAN MATS 36" X 45" WHITE 60-SHEETS/CARTON MANUFACTURER: ULINE MODEL: H-1239W DESCRIPTION: CLEAN MATS 36" X 45" WHITE 60-SHEETS/CARTON SKU: U30H009 1B-10-05(12) 19LBS - 45IN X 37IN X 2IN

[USED] MJ RESEARCH PTC-225 PELTIER THERMAL CYCLER 4-BLOCK WITH POWER SUPPLY. THIS THERMAL CYCLER IS IN GOOD COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM REGULAR INDUSTRIAL USE, AND TAPE AND TAPE RESIDUE ON THE ENCLOSURE FROM OLD TAGS, TAPE, AND MESSAGES STUCK TO THE SURFACE. COMES IN NON-ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. WE POWERED UP THIS THERMAL CYCLER AND OBSERVED ALL FOUR BLOCKS HEAT AND HOLD THEIR TEMPERATURE. ALL FOUR MOTORIZED COVERS FUNCTION AS DESIGNED. THE POWER SUPPLY FAN IS VERY NOISY BUT FUNCTIONS. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) MJ RESEARCH PTC-225 PELTIER THERMAL CYCLER 4-BLOCK WITH POWER SUPPLY SPECIFICATIONS: MANUFACTURER: MJ RESEARCH MODEL: PTC-225 DESCRIPTION: PELTIER THERMAL CYCLER INCLUDES 4 ALPHA UNIT BLOCK 96 ASSEMBLY FOR PTC DNA ENGINE SYSTEM INCLUDES POWER SUPPLY HIGH-DENSITY DISPLAY 4 SAMPLE BLOCK CAPABILITY REAL-TIME MONITORING OF CYCLING TEMPERATURE ON-BOARD POINT-AND-CLICK SOFTWARE NAVIGATION GRADIENT AND NON-GRADIENT CONTROLLED BASE OPTIONS TEMPERATURE RANGE (C) -5.00 TO 105 HEATING RATE (C/SEC) 3.00 COOLING RATE (C/SEC) 3.00 UNIFORMITY (+/-C) 0.4000. BLOCK TYPE: HOT; COLD; GRADIENT. 4-BAY HIGH-THROUGHPUT THERMAL CYCLING ACCOMMODATES UP TO 8 INDIVIDUAL SAMPLE BLOCKS UP TO 1536 SAMPLES CAN BE PROCESSED SIMULTANEOUSLY INTERNAL POWER SUPPLY-NO SEPARATE BOXES TO ACCOMMODATE HIGH-DENSITY COLOR DISPLAY AND ONBOARD MOUSEPAD, WITH POINT-AND-CLICK NAVIGATION OF SOFTWARE REAL-TIME MONITORING OF CYCLING TEMPERATURE EXTRAORDINARY TEMPERATURE UNIFORMITY OF 0.4C WITHIN 30 SECONDS OF ARRIVAL AT 90C, WELL-TO-WELL AVERAGE 0.5C FOR DUAL BLOCK ALPHAS). SUPERB THERMAL ACCURACY OF BLOCKS WITHIN 0.3C OF NIST STANDARD AT 90C, THE AVERAGE ACROSS THE BLOCK (0.4C FOR DUAL BLOCK ALPHAS). THE THERMAL RANGE OF -5 TO 105C RAPID RAMP RATES OF THERMAL RANGE -5 TO 105C, BUT NO MORE THAN 30C BELOW AMBIENT TEMPERATURE THERMAL ACCURACY +/-0.3C OF THE PROGRAMMED TARGET AT 90C THERMAL UNIFORMITY +/-0.4C WELL-TO-WELL WITHIN 30 SECONDS OF ARRIVAL AT 90 RAMPING SPEED UP TO 3C/SEC SAMPLE CAPACITY FOUR ALPHA BLOCK, HOLDS 96 X 0.2 ML TUBES OR ONE 96-WELL MICROPLATE/BLOCK LINE VOLTAGE 10A @ 200-240 VAC, 50-60HZ PORTS ONE 25-PIN 8-BIT PARALLEL INTERFACEPRINTER PORT & RS-232 SERIAL PORTUP TO 3.0C/SEC POWER SUPPLY: LUCENT TECHNOLOGIES 98DJ2321263 RM200HA100 SERIES 1:3 INPUT- 200-240V 11.5A 50/60HZ OUTPUT - 48-56VDC 200W SKU: X04H020 3A-06-01(1) 81LBS - 25IN X 25IN X 20IN

BK PRECISION 4084 20MHZ DIGITAL ARBITRARY/FUNCTION GENERATOR WITH COUNTER - MANUFACTURER: BK PRECISION MODEL: 4084 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS GENERATOR IS IN FAIR COSMETIC CONDITION. THE FRONT PANEL LOOKS NICE BUT THE TOP HAS HEAVY SCUFFS AND A LONG DENT. THE TOPS OF THE BUMPERS ARE HEAVILY SCUFFED AS WELL. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS GENERATOR IS IN PARTIAL WORKING CONDITION. THE DISPLAY IS BRIGHT AND CLEAR. IT TAKES A SURPRISINGLY LONG TIME TO FINISH POWERING ON, AND SAYS 4085 INSTEAD OF 4084 DURING INITIALIZATION. THE CONTROLS DO NOT RESPOND CONSISTENTLY TO BUTTON PRESSES, WE ARE NOT SURE WHY. MOSTLY IT IGNORES, BUT A FEW PERCENT OF THE TIME, WHEN YOU PUSH A BUTTON SOMETHING WILL HAPPEN - NOT NECESSARILY THE THING THAT BUTTON IS SUPPOSED TO MAKE HAPPEN. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) BK PRECISION 4084 FUNCTION GENERATOR SPECIFICATIONS: MANUFACTURER: BK PRECISION MODEL: 4084 ARBITRARY/FUNCTION GENERATOR WITH COUNTER 20MHZ NOT WORKING, SOLD AS-IS! SKU: X33D012 3A-06-03(1) 8LBS - 22IN X 15IN X 8IN

2013 ESPEC EZO30-EA TEMPERATURE/HUMIDITY STABILITY ENVIRONMENTAL CHAMBER S/N: - MANUFACTURER: ESPEC MODEL: EZO-EA ENVIRONMENTAL STABILITY CHAMBER SUITABLE FOR ICH Q1A CONDITIONS: LONG TERM: 25C/60%, 30C/65% INTERMEDIATE: 30C/65% ACCELERATED: 40C/75% INTERIOR VOLUME: 800 LITERS (28.1 CUBIC FEET) INTERIOR DIMENSIONS: 27.5" X 27.8" X 63.5"H EXTERIOR DIMENSIONS: 34" X 40" X 94" TEMPERATURE RANGE: 10 TO 65 OC HUMIDITY RANGE: 20% TO 90% RH, TEMPERATURE-DEPENDENT POWER REQUIREMENT: 208/230V 1-PHASE 4-WIRE 60HZ 24A TEMPERATURE FLUCTUATION AT SENSOR: +/-0.25 OC HUMIDITY FLUCTUATION AT SENSOR: +/- 2% SINGLE-STAGE REFRIGERATION MEETS ICH Q1A GENERAL CASE GUIDELINES FOR PHARMACEUTICAL STABILITY TESTING FROST-FREE CONTINUOUS REFRIGERATION HEATED FULL-VIEW WINDOW HORIZONTAL AIRFLOW (3) ADJUSTABLE SOLID SHELVES WITH LIPS TO PROTECT AGAINST SPILLS DESIGNED FOR FLUSH INSTALLATION ON ALL SIDES MANUFACTURED IN 2013 NOT WORKING RIGHT, PLEASE READ THE TESTING NOTES! CONDITION: FOR PARTS OR NOT WORKING. THIS CHAMBER IS IN FAIR COSMETIC CONDITION. THERE ARE MINOR SCUFFS/SCRATCHES AND SOME ADHESIVE LABEL RESIDUES ON THE STAINLESS, AND THE PAINT OUTSIDE HAS LOTS OF SMALL SPOTS OF CORROSION AND A FEW HEAVY SCRATCHES, BUT NOTHING THAT WILL AFFECT FUNCTION. THE REAR TOP PANEL DOES NOT FIT WELL, WITH A GAP ACROSS THE BOTTOM. THE MOUNT FOR THE CAPACITOR ON THE COMPRESSOR IS BROKEN, SO THE CAPACITOR SITS ON TOP OF THE CHAMBER LOOSE. ONE OF THE WHEELS HAS ITS SOFT TIRE MISSING, SO THE CHAMBER ROCKS SLIGHTLY WHEN PUSHED. THIS IS BEING SOLD AS/IS. NOTE: WE DO NOT HAVE THE KEY FOR THE DOOR LOCK. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS CHAMBER IS IN PARTIAL WORKING CONDITION. WE WERE ABLE TO RUN IT ALL THE WAY TO THE MAXIMUM HIGH TEMPERATURE AND HUMIDITY, WITH CONDENSATION RUNNING DOWN THE DOOR. WE SET MINIMUM TEMPERATURE AND HUMIDITY, AND IT COOLED 10O BUT THE HUMIDITY ONLY LOWERED SLIGHTLY. WE FOUND IN LATER TESTING THAT IT IS ABLE TO INCREASE THE HUMIDITY, BUT NOT ABLE TO DECREASE HUMIDITY. AFTER THE CHAMBER HAD COME TO AMBIENT TEMPERATURE FOR A FEW HOURS, THERE WAS STILL A LARGE AREA OF CONDENSATION INSIDE THE DOOR WINDOW. THE FAN AND REFRIGERATION RUN RELATIVELY QUIETLY. THE DOOR CLOSES VERY SECURELY, TO THE POINT OF BEING HARD TO OPEN. NO OTHER TESTING WAS DONE. WE ARE NOT SURE WHAT-ALL MAY BE WRONG WITH THIS CHAMBER, BUT WE THINK THE (EXPENSIVE) HUMIDITY SENSOR MAY BE FAULTY. THIS IS BEING SOLD AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ESPEC EZO30-EA ENVIRONMENTAL CHAMBER

[NEW] METCAL BVX-201 SOLDERING VAPOR/FUME EXTRACTION SYSTEM FILTER FAN, METCAL BVX-ARM FLEXIBLE EXHAUST ARM, METCAL BVX-ARML 5 FT. FLEXIBLE EXHAUST ARM, MANUAL, POWER ADAPTER, HEPA FILTER. SPECIFICATIONS: MANUFACTURER: METCAL SERIES: BVX-200 MODEL: BVX-201 SOLDERING VAPORS/FUME EXTRACTOR PORTABLE, PLACED UNDER OR BEHIND A WORKSTATION OR DESK FAN CAPACITY: 250 M3/H (150 CFM) FLOW RATE (WITH FILTER): 2 X 75M3/H (45 CFM) STATIC PRESSURE (SUCTION FORCE): 850 PA (3.5" WC) HEPA EFFICIENCY: 99.97 % AT 0.3 MICRONS NOISE LEVEL: < 55 DBA 2 INLET HOSE LOCATIONS FOR UP TO 2 WORKSTATIONS POWER SWITCH ON ONE SIDE DIMENSIONS: 20" X 10" X 15"H POWER INLET: IEC 320 C14 JACK "REGULAR POWER CORD".

ASSEMBLEON/PHILIPS 4022 594 51043 PIPETTE CONTROLLER EXTENSION PCB BOARD - MANUFACTURER: ASSEMBLEON MODEL: 4022 594 51043 CONDITION: NEW OTHER. COMES IN NON-ORIGINAL ESD PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ASSEMBLEON/PHILIPS 4022 594 51043 SPECIFICATIONS: MANUFACTURER: ASSEMBLEON (PHILIPS) MODEL: 4022 594 51043 DESCRIPTION: PIPETTE CONTROLLER BOARD WEIGHT: 0.70 LBS. CONDITION: NEW QUANTITY: 1 SKU: P13P011 1A-02-03-06(1) 0LBS - 10IN X 10IN X 5IN

[BECKMAN OPTIMA TLX ULTRACENTRIFUGE] MANUFACTURER: BECKMAN SPINCO DIVISION MODEL: TLX OPTIMA SERIES ULTRACENTRIFUGE CAT. NO.: 361545 SPEED RATING: 5,000 TO 120,000 RPM DIGITAL SPEED, TEMPERATURE, AND TIME DISPLAYS TEMPERATURE RANGE: 2 TO 40 OC SOLID-STATE REFRIGERATION (USES NO REFRIGERANT EXCEPT AIR) MECHANICAL AND DIFFUSION VACUUM PUMPS INSIDE FOR 10 MICRON CHAMBER PRESSURE POWER: 120V 12A 60HZ MANUAL OR PROGRAMMED OPERATION PROGRAMMABLE ACCELERATION/DECELERATION COMPATIBLE WITH TL-SERIES BECKMAN ROTORS CHEMICAL-RESISTANT CHAMBER IS REINFORCED FOR SAFETY AIR-COOLED DIRECT DRIVE INDUCTION MOTOR HAS NO BELTS, GEARS, OR BRUSHES. CONDITION: FOR PARTS OR NOT WORKING. THIS CENTRIFUGE IS IN FAIR COSMETIC CONDITION. IT HAS LOTS OF MINOR SCUFFS/SCRATCHES FROM PRIOR USE, ESPECIALLY ON THE SIDES. THE LEFT SIDE OF THE TOP COVER HAS A PAIR OF BROKEN BOLT HOLES. THE INSIDE OF THE CHAMBER LOOKS PRETTY CLEAN. THE DOOR OF THE CHAMBER DOOR HAS TWO SPOTS WITH BLACK GOO, WE THINK FROM A PAIR OF PADS DISINTEGRATING SOMEWHERE UNDER THE MACHINE'S TOP COVER. NOTES: THIS ULTRACENTRIFUGE IS NOT WORKING PROPERLY. THE MOTOR WILL NOT SPIN, BUT THE CONTROL PANEL GIVES A FLASHING "DRIVE" INDICATION INSTEAD. THE REFRIGERATION SYSTEM COOLS TO 2OC WITHOUT DIFFICULTY, AND THE VACUUM SYSTEM PUMPS DOWN. PRESSING "ENTER, 4, 1, 1, ENTER" SHOWS A VACUUM READING THAT FALLS FROM 10,000 TO 0 IN A COUPLE OF MINUTES. THE VAC LIGHT GOES OUT SOON AFTER POWER-ON. WHEN THE ROTOR IS SPUN BY HAND, A SPEED INDICATION SHOWS UP ON THE SCREEN. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SKU: X06D003 5A-10-02(1) 230LBS - 48IN X 40IN X 40IN

[ED&D HP-2000] AUTOMATIC AC/DC DIELECTRIC TESTER HIPOT WON'T MAKE FULL VOLTS-PARTS - MANUFACTURER: EDUCATED DESIGN & DEVELOPMENT, INC. MODEL: HP-2000 AUTOMATIC AC/DC DIELECTRIC TESTER TEST VOLTAGE: ADJUSTABLE AC 100-3000 V RMS DC 100-4250 TRIP CURRENT LIMIT: 10 MA 1- OR 6- SECONDS TEST TIME INPUT VOLTAGE: 100-120VAC 1A 50-60HZ CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS TESTER IS IN FAIR COSMETIC CONDITION, WITH SCUFFS/SCRATCHES AND RESIDUES FROM PRIOR USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS TESTER IS IN PARTIAL WORKING CONDITION. WE WERE ONLY ABLE TO GET OUTPUTS OF JUST OVER 1.5KV DC AND 1.6KV AC INDICATED. WE ARE NOT ABLE TO VERIFY OUTPUT VOLTAGE. THE ADJUSTMENT KNOB HAS A PROBLEM, WHERE SETTING IT FULLY CLOCKWISE *LOWERS* THE SETTING AND CAUSES INSTANT FAILURE. WE WERE ONLY ABLE TO GET A FULL TEST TO PASS WITH A GOOD DUT ON THE 1 SECOND DC SETTING. WE ARE NOT SURE WHAT MAY BE WRONG WITH THIS UNIT. NO OTHER TESTING WAS DONE. THIS IS BEING SOLD AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ED&D HP-2000 HIPOT TESTER SKUS: Y40D016 3A-01-03(1) 19LBS - 16IN X 16IN X 10IN

VWR 24X60MM GLASS SLIDES. INCLUDED: (190) NEW VWR 24X60MM GLASS SLIDES (46) 48393 251 (144) 48404 454 SPECIFICATIONS: MANUFACTURER: VWR MODEL: 48393 251 MODEL: 48404 454 MICRO COVER GLASS SLIDES SIZE: 24 X 60 MM RECTANGULAR THICKNESS 0.13 TO 0.17 MM 1 OZ INCREMENTS UNIFORMLY THIN AND FLAT SUITABLE FOR HUMID ENVIRONMENTS RESISTANT TO CORROSION SERIES: SUPERSLIPS

[CBS SCIENTIFIC NGP-400R GLASS SETS] (3) NEW CBS SCIENTIFIC CO. NGP-400R GLASS SETS W/(1)ABI 401835 GLASS SET. GLASS PLATE SET DIMENSIONS: 16.5 CM X 38.7 CM FOR CBS SCIENTIFIC ADJUSTABLE SLAB GEL SYSTEMS. [ABI 401835 GLASS PLATE SET] COMPATIBLE WITH ABI PRISM 377 DNA SEQUENCER UNITS. PLATE: 48 CM PLAIN. SKU: V27B017 5A-01-01(1) 48LBS - 32IN X 17IN X 15IN

[SP SCIENTIFIC XE75] TEMPERATURE CYCLING SYSTEM FTS AIR-JET - WATER IN COOLING - MANUFACTURER: FTS SYSTEMS MODEL: XE753 CONDITION: FOR PARTS OR NOT WORKING. THIS SYSTEM IS IN FAIR COSMETIC CONDITION. THERE ARE LOTS OF SMALL SCUFFS/SCRATCHES/DINGS ESPECIALLY IN THE BIGGER CABINET THAT MAKE IT LOOK A LITTLE ROUGH FROM CLOSE UP. THE PLASTIC COVER ON THE AIR PRESSURE GAUGE MAY BE MISSING FROM THE UNIT YOU RECEIVE. THE MAINS POWER AND AIR INPUT CONNECTIONS MAY VARY FROM THOSE SHOWN. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS UNIT IS NOT WORKING PROPERLY. WE SUSPECT THERE MAY BE WATER IN THE COOLING SYSTEM, WHICH MAY BE ABLE TO BE FIXED JUST BY RUNNING VERY DRY AIR THROUGH (-80OC FREEZING RATED) FOR A WHILE, WE ARE NOT SURE. THE COOLING DOES NOT REACH MAXIMUM COLD TEMPERATURE, IT ONLY GETS TO ABOUT -65 OR SO DEGREES. THE HEATER OVERSHOOTS BADLY AND CAN ONLY ATTAIN ABOUT 200 DEGREES. EVENTUALLY THE AIRFLOW GETS LESS AND LESS AS (WE SUSPECT) THE WATER INSIDE FREEZES UP AND CHOKES OFF THE PASSAGE OF AIR, EVEN TO THE POINT OF STOPPING AIRFLOW OUTPUT ALTOGETHER. THE STATUS LIGHTS ON THE CONTROLLER DOESN'T LIGHT UP. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) REFRIGERATION UNIT WITH OUTPUT HOSE ATTACHED (1) CONTROLLER (1) CONNECTION CABLE SPECIFICATIONS: MANUFACTURER: FTS SYSTEMS MODEL: XE753_01 AIR-JET XE PRECISION TEMPERATURE CYCLING SYSTEM TEMPERATURE RANGE: -75OC TO +225OC THERMAL FORCING UNIT FITS ON THE BENCHTOP SELF-CONTAINED ONLY REQUIRES DRY AIR, NO NITROGEN REQUIRED! MONITOR AND CONTROL FROM AN INTERNAL OR EXTERNAL (SAMPLE-MOUNTED) THERMOCOUPLE SAVE MULTI-STEP PROFILES IN THE WATLOW F4 DIGITAL CONTROLLER RS-232 OR GPIB (IEEE_488) PROGRAMMABILITY TO INTERFACE WITH AUTOMATED TEST EQUIPMENT FLOW RATES AJUSTABLE FROM 1.0 TO 4.0 SCFM (2.0 SCFM GIVES BEST TEMPERATURE CONTROL RANGE) SMALL ENOUGH TO BE RACK-MOUNTED REFRIGERATION UNIT DIMENSIONS: 24" X 15" X 16"H (APPROXIMATELY) BUILT-IN OVERTEMPERATURE SAFETY BUILT-IN LOW-FLOW SAFETY PID DIGITAL CONTROLLER RATED FOR +/-0.5O STABILITY AND REPEATABILITY (PLEASE READ TESTING NOTES!) CONTROL UNIT DIMENSIONS: 10" X 8" X 7" (APPROXIMATELY) TRANSITION SPECIFICATIONS @ 2SCFM (PLEASE READ TESTING NOTES!) -55OC TO +125OC <10 SECONDS +125OC TO -55OC <20 SECONDS POWER: 220V 50HZ (COMPATIBLE WITH 230V 60HZ) REQUIRES CLEAN DRY AIR, 7SCFM WITH -80OC DEWPOINT NO THERMAL CAPS (SAMPLE ENCLOSURES) ARE INCLUDED SKU: S08D012 2A-05-01(2),2B-02-01(2) 190LBS - 48IN X 40IN X 35IN

[VWR] 2.0ML LOW TEMPERATURE FREEZER VIALS SELF STANDING OLD STOCK (400) - MANUFACTURER: VWR MODEL: 66008-284 CONDITION: NEW. THESE VIALS ARE STILL SEALED IN THEIR ORIGINAL BAGS. THE BAGS ARE SLIGHTLY YELLOWED FROM AGE. UNUSED OLD STOCK THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (3) BAGS OF 50PCS. VWR 16001-102 VIALS (5) BAGS OF 50PCS. VWR 66008-284 VIALS SPECIFICATIONS: MANUFACTURER: VWR INTERNATIONAL LOW TEMPERATURE FREEZER VIALS SELF STANDING POLYPROPYLENE 2.0ML GRADUATED ON THE SIDE CAT. NO. 66008-284 HAVE SILICONE WASHER SEAL AND INTERNAL THREADS CAT. NO. 16001-102 HAVE LIP SEALS AND EXTERNAL THREADS SKU: S18D027 2F-03-02(1) 4LBS - 12IN X 12IN X 9IN

HAKKO T7/T15-SD16 SOLDERING TIP FOR FM-202/FP-102 PART #: T7/T15-SD16 TIP SHAPE: 1.6SD FOR IRONS: HAKKO FM-203-HANDPIECE : HAKKO FM-2027(70W) HAKKO FM-204-HANDPIECE : HAKKO FM-2027(70W) HAKKO FX-950-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-951-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-952-HANDPIECE : HAKKO FM-2028(70W) HAKKO FM-202-HANDPIECE : HAKKO FM-2021(70W) OR HANDPIECE : HAKKO FM-2027(70W) NOTE: THE T15 TIPS HAVE REPLACED THE T7 TIPS. THE ONLY DIFFERENCE IS HAKKO HAS PHASED OUT THE BARCODE FROM THE TIPS. SEE THE?HAKKO PRODUCT BULLETIN.

[WISE DEVICE WDI ATF6 SYS 785NM] LASER AUTOFOCUS SENSOR WITH CTR-MCM+ CONTROLLER. MANUFACTURER: WISE DEVICE WDI MODEL: ATF6 SYS 785NM. CONDITION: USED. THIS ASSEMBLY IS IN GOOD COSMETIC CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM REGULAR COMMERCIAL USE AND COMES IN NON-ORIGINAL PACKAGING. WE HAVE FOUR OF THESE IN OUR INVENTORY AND TWO OF THEM HAVE PART OF THE WARNING LABEL MISSING FROM THE BACK OF THE SENSOR THAT READS, "VISIBLE & INVISIBLE LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT". THE CABLE SET MAY VARY SLIGHTLY FROM ONE UNIT TO THE OTHER IN OUR INVENTORY. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: WE APPLIED 24VDC POWER TO THE CONTROLLER POWER INPUT AND OBSERVED THE GREEN POWER LED BLINK ON AND OFF. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) WDI ATF6SYS785NM (1) WDI CTR-MCM+ CONTROLLER (1 SET) CABLES INCLUDING POWER, SENSOR, Z DRIVE. SPECIFICATIONS: MANUFACTURER: WISE DEVICE INC. MODEL: ATF6 SYS 785NM DESCRIPTION: ATF FAMILY AUTONOMOUS DIGITAL AUTOFOCUS SENSOR FOR INTEGRATION INTO MICROSCOPE SYSTEMS MAINTAINS FOCUS ON STATIONARY OR MOVING SURFACES USES A THROUGH-THE-LENS (TTL) 785NM LASER PATTERN FOCUS TECHNIQUE STATIC AUTOFOCUS ACCURACY: 1/4 OBJECTIVE DEPTH OF FIELD OR BETTER TRACKING AUTOFOCUS ACCURACY: 1/2 OBJECTIVE DEPTH OF FIELD OR BETTER CONTROLLER MODEL CTR-MCM+ HAS A Z-AXIS DRIVE OUTPUT POWER REQUIREMENT: 24VDC SKU: Y07H017 3A-02-03(3) 7LBS - 10IN X 10IN X 10IN

[BD] [309656] SYRINGE 3ML SLIP TIP LATEX FREE DISPOSABLE SYRINGE NO NEEDLE (274) - MANUFACTURER: BD MODEL: 31476 CONDITION: NEW OTHER. THESE SYRINGES ARE IN A NEW AND UNUSED COSMETIC CONDITION AND COME IN THE ORIGINAL SEALED BUBBLE WRAP PACKAGING. THE CONTAINER PACKAGING IS NON-ORIGINAL. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (274)6 3ML SLIP TIP SYRINGE SPECIFICATIONS: MANUFACTURER: BD MODEL: 309656 DESCRIPTION: SYRINGE 3ML SLIP TIP LATEX FREE DISPOSABLE SYRINGE NO NEEDLE SKU: V35H016 2B-06-04(1) 6LBS - 22IN X 15IN X 9IN

[HP 8657B RF SIGNAL GENERATOR 100KHZ-2060MHZ +13DBM/-143DBM OPT 001 003] HP 8657B SIGNAL GENERATOR RANGE: 100KHZ TO 1.04GHZ WIDE DYNAMIC RANGE: +13 TO -143.5DBM WITH PROGRAMMABLE AM AND FM MODULATION ABILITIES FULL HP-IB (IEEE-488) PROGRAMMABILITY LOW RESIDUAL FM OPTIONS MARKED AS INSTALLED: OPTION 001 HIGH STABILITY TIMEBASE OPTION 003 PULSE MODULATION. MANUFACTURER: HEWLETT PACKARD HP MODEL: 8657B CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS UNIT IS IN FAIR COSMETIC CONDITION WITH LOTS OF MINOR SCUFFS/SCRATCHES/RESIDUES FROM PRIOR USE. THE POWER SWITCH IS BROKEN OFF. THE AMPLITUDE DOWN ARROW IS BROKEN OFF. THE PLASTIC COVERS ON THE SCREWS HOLDING ON THE SIDE HANDLES ARE BROKEN AND MISSING. THERE IS A FUNKY TEXTURE OVER THE MODULATION DISPLAY THAT LOOKS BAD WHEN IT'S POWERED DOWN BUT DOESN'T INTERFERE WITH USING THE INSTRUMENT. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS UNIT IS IN PARTIAL WORKING CONDITION. THE POWER BUTTON HAS TO BE PRESSED HARD A COUPLE TIMES TO SWITCH ON. THE KEYBOARD BUTTONS WORK. THE DISPLAY IS BRIGHT AND EASY TO READ. WE FOUND DURING A BRIEF TEST THAT THERE IS NO OUTPUT SIGNAL FROM THE RF OUTPUT CONNECTOR, BUT THE ATTENUATORS COULD BE CLEARLY HEARD STEPPING INSIDE WHEN AMPLITUDE CHANGES WERE COMMANDED. OUT OF CURIOSITY, WE POPPED THE BOTTOM COVER AND TOOK OFF THE LINE BEFORE THE ATTENUATORS, AND FOUND ABOUT 1.3V IN THE APPROPRIATE FREQUENCY, WHICH WE WERE ABLE TO MONITOR OUT TO 1.5GHZ (THE LIMIT OF OUR COUNTER). WE ARE NOT SURE WHAT MAY BE WRONG WITH THIS UNIT. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 8657B SIGNAL GENERATOR SPECIFICATIONS: SKU: Y36D018 1D-01-01(1) 47LBS - 36IN X 25IN X 12IN

[MORITEX MTI-195-CG-070] BI-TELECENTRIC LENS ILLUMINATOR. MANUFACTURER: MORITEX MODEL: MTI-195-CG-070 DESCRIPTION: BI-TELECENTRIC LENS GREEN COLOR 195MM AREA 365MM WD DOMINANT WAVELENGTH: 520-550NM BEAM ANGLE: 0~0.11 DEGREES LENGTH: 488.3MM FRONT OUTER DIA: 230MM MAX CURRENT: 700MA 3W. INCLUDED: (1) MORITEX MTI-195-CG-070 BI-TELECENTRIC LENS/ILLUMINATION GREEN COLOR 195MM AREA (1) MORITEX MCEP-CG22-070 ASSEMBLY. WEIGHT: 37LBS - 36IN X 25IN X 19IN.

HP 6624A SYSTEM DC POWER SUPPLY FOUR, 40 WATT OUTPUTS MAXIMUM OUTPUTS: CHANNELS 1 & 2: 7V 5A / 20V 2A CHANNELS 3 & 4: 20V 2A / 50V 0.8A TWO RANGES FOR EACH OUTPUT (0-7V AND 0-20V, 0-20V AND 0-50V) INDIVIDUALLY PROGRAMMABLE OUTPUTS REMOTE SENSE CAPABLE GPIB COMMUNICATIONS RACK MOUNTING TABS AND SIDE HANDLES (NO FEET) POWER INPUT REQUIREMENT: 100/120/220/240 50/60HZ MANUFACTURER: HEWLETT PACKARD HP MODEL: 6624A CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS POWER SUPPLY IS IN FAIR COSMETIC CONDITION WITH LOTS OF MINOR SCUFFS/SCRATCHES/STAINS FROM PRIOR USE. THERE IS AN EXTREME AMOUNT OF DUST INSIDE THIS UNIT. THE PLASTIC BRACKETS THAT HIDE THE ENDS OF THE HANDLES ARE CRACKED AND BROKEN. ONE OF THE SCREWS ON AN OUTPUT TERMINAL STRIP IS MISSING. THE PLASTIC AROUND THE DISPLAY AREA IS DELAMINATING. THERE IS A PERMANENT-MARKER "MOD 1" ON THE FRONT. THERE IS NO FAN IN THIS POWER SUPPLY. THERE ARE VISIBLY-BAD CAPACITORS INSIDE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SUPPLY IS IN PARTIAL WORKING CONDITION. WE TESTED ALL FOUR CHANNELS AND VERIFIED THEY WILL GIVE MAXIMUM RATED VOLTAGE AT NO LOAD. THE DISPLAY WORKS. THE KEYBOARD WORKS. WE ARE NOT ABLE TO TEST THE HP-IB INTERFACE. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 6624A SYSTEM DC POWER SUPPLY

ALCATEL FERROCOM 60D124-04R 10.4-10.8GHZ RF MICROWAVE ISOLATOR SMA S/N: 5885373H09. MANUFACTURER: ALCATEL FERROCOM, MODEL: 60D124-04R, MICROWAVE ISOLATOR, RANGE: 10.4GHZ TO 10.8GHZ, CONNECTORS: MALE AND FEMALE SMA. ALSO MARKED 5885373H09 REV. B. THE BUYER WILL RECEIVE (4) ALCATEL 60D124-04R ISOLATORS. 2LBS - 8IN X 8IN X 4IN

[BASE LAB TOOLS] LIGHTWEIGHT HONEYCOMB OPTICAL BREADBOARD 48" X 60" W/ RIGID FRAME - MANUFACTURER: BASE LAB TOOLS MODEL: BB4860-A-4 / BSS4860-R-36. THE BREADBOARD IS MODEL BB4860-A-4 AND THE TABLE FRAME IS MODEL BSS4860-R-36. THE BREADBOARD AND TABLE ARE IN GOOD COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM REGULAR INDUSTRIAL USE AND COME IN NON-ORIGINAL PACKAGING. THE SHELF APPEARS TO BE AFTERMARKET OR A CUSTOM JOB BY THE PREVIOUS OWNER AS DOES THE ADDITIONAL SUPPORT BEAM IN PLACE UNDER THE CENTER OF THE BREADBOARD. THERE IS ALSO A LARGER CHIP IN THE FINISH ON ONE OF THE SIDES. THE MOUNTING HOLES ARE M6 - 1.0. INCLUDED: (1) BASE LAB TOOLS LIGHTWEIGHT HONEYCOMB OPTICAL BREADBOARD 48" X 60" W/ RIGID FRAME SPECIFICATIONS: MANUFACTURER: BASE LAB TOOLS MODEL: BB4860-A-4 / BSS4860-R-36 DESCRIPTION: LIGHTWEIGHT HONEYCOMB OPTICAL BREADBOARD WITH RIGID FRAME BREAD BOARD BASE LAB TOOLS MODEL: BB4860-A-4 48" X 60" X 4.4" ALUMINUM 6061 SKIN, 3/16" (5MM) THICK AND ADD 3/8" (10MM) TO THE OVERALL THICKNESS OF THE BREADBOARD. SKIN IS COATED WITH A BLACK ANTI-REFLECTIVE FINISH THAT IS IMPERVIOUS TO MOST CHEMICALS. THE FINISH ABSORBS OR SCATTERS MORE THAN 90% OF LIGHT INCIDENT UPON IT. ALUMINUM HONEYCOMB CORE (2773) M6 - 1.0 THREADED MOUNTING HOLES FRAME MODEL BSS4860-R-36 SUPPORTS LOADS UP TO 2000LBS (907KG) ADJUSTABLE HEIGHT 36" MEDIAN RIGID FULLY-WELDED DESIGN SINGLE-LOWER SHELF WHITE FINISH.

[HEWLETT PACKARD 3478A DIGITAL MULTIMETER DMM 5-1/2 DIGIT WITH HP-IB INTERFACE - MANUFACTURER: HEWLETT PACKARD HP MODEL: 3478A CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS METER IS IN FAIR COSMETIC CONDITION. THE UNIT LOOKS AND FEELS DIRTY, AND HAS MANY MINOR SCUFFS/STAINS/SPOTS OF RESIDUES FROM PRIOR USE. THE FRONT PANEL HAS A TAPE APPLIED WITH THE SERIAL NUMBER OVER THE DISPLAY. THAT TAPE IS STUCK ON THERE. THIS IS THE "NEWER" STYLE OF UNIT, WITH PLASTIC ALL OVER. WHILE SUPPLIES LAST, WE ALSO HAVE A COUPLE OF THE "OLDER" STYLE WITH METAL COVERS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS METER IS IN GOOD WORKING CONDITION. THE POWER-ON SELF-TEST GIVES A "SELF TEST OK" MESSAGE. ALL THE MEASUREMENTS FROM THE FRONT PANEL INPUTS ON AC AND DC VOLTS, AC AND DC CURRENT, 2-WIRE AND 4-WIRE OHMS WERE CLOSE TO WHAT WE WOULD GET ON OUR REFERENCE METER. THE DISPLAY IS CLEAR AND EASY TO READ. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 3478A MULTIMETER SPECIFICATIONS: MANUFACTURER: HEWLETT-PACKARD MODEL: 3478A DIGITAL MULTIMETER 3-1/2 TO 5-1/2 DIGIT RESOLUTION (USER SELECTABLE OR AUTORANGE) HP-IB/GPIB COMPATIBLE FRONT- AND REAR-PANEL INPUTS S/N: Y33D017 1E-06-04(1) 10LBS - 18IN X 12IN X 8IN]

[RINCO ULTRASONICS PCS-GM-20] CONTROL GENERATOR PCS II PROCESS 20-KHZ 1500W - MANUFACTURER: RINCO ULTRASONICS AG MODEL: PCS-GM-20 CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. IT HAS SCUFFS AND SCRATCHES FROM NORMAL USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE APPLIED POWER TO THIS UNIT AND IT DID NOT POWER ON. WE CHECKED THE FUSES, WHICH WERE GOOD. NO FURTHER TESTING WAS PERFORMED. NOTE: THIS ITEM IS MISSING A BUNCH OF CASE SCREWS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) RINCO ULTRASONICS PCS-GM-20 CONTROL GENERATOR SPECIFICATIONS: MANUFACTURER: RINCO ULTRASONICS AG TYPE: PCS-GM-20 SINGLE PHASE 50/60 HZ 230V 20 KHZ 1500W SKU: S44L002 2A-04-01(1) 32LBS - 22IN X 15IN X 15IN

[COSMO INSTRUMENTS LS-1840-L/V] AIR LEAK TESTER - PARTS - MANUFACTURER: COSMO MODEL: LS-1840L/V CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS TESTER IS IN FAIR COSMETIC CONDITION WITH LOTS OF MINOR BLEMISHES FROM PRIOR USE INCLUDING SCUFFS/SCRATCHES/STAINS AND ADHESIVE LABEL RESIDUES. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE ARE NOT ABLE TO TEST THIS ITEM. WE DO NOT HAVE THE REQUIRED POWER CABLE OR KEY SWITCH. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) COSMO LS-1840 AIR LEAK TESTER SPECIFICATIONS: MANUFACTURER: COSMO INSTRUMENTS CO., LTD. MODEL: LS-1840-L/V AIR LEAK TESTER SKU: U16D001 1B-01-01(1) 55LBS - 25IN X 19IN X 16IN

CONVIRON TCR60 60 SQ.FT. WATER-COOLED/HEATED GROW ROOM LIT SHELF WALK-IN CHILLER. THIS ROOM IS IN FAIR COSMETIC CONDITION WITH SCUFFS/SCRATCHES/MARKS FROM PRIOR USE AND DUST IN THE MECHANICAL PARTS. THE COPPER WATER LINES HAVE BEEN CUT AND CABLES HAVE BEEN DISCONNECTED; AN ELECTRICIAN AND PLUMBER WILL BE REQUIRED BEFORE THIS ROOM CAN BE RECOMMISSIONED. PLEASE NOTE: THERE IS NO WATER CHILLER IN THIS LOT. YOU WILL NEED TO SUPPLY YOUR OWN CHILLER IF YOU WANT TO HAVE COOLING IN THIS ENVIRONMENT! THIS ROOM WAS WORKING WHEN DECOMMISSIONED AND DISMANTLED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) CONVIRON 60 SQUARE FOOT GROWTH CHAMBER SPECIFICATIONS: MANUFACTURER: CONVIRON COOLED/HEATED WALK-IN ENVIRONMENTAL CHAMBER APPROXIMATE OUTSIDE DIMENSIONS: 128 X 70 X 110 APPROXIMATE 60FT2 (5.6M2) INSIDE DIMENSIONS SMALLER INTERIOR ROOM, LARGER EXTERIOR ROOM DESIGNED FOR GROWING SMALL BIOLOGICAL SAMPLES UNDER FLUORESCENT LIGHTING (6) ILLUMINATED GROWING SHELVES FOAM-CORE INSULATING WALLS WATER-COOLED (REQUIRES EXTERNAL CHILLER, NOT INCLUDED) PUMP AND 3KW HEATER INCLUDED FLUORESCENT BALLASTS ON RACKS IN FAN-COOLED ENCLOSURES SHELVES HAVE REMOVABLE GRATES UNDER GROW PLATFORM NO FLOOR CONTROLLER: CONVIRON TCR60 POWER REQUIREMENT: 120/208V 3PHASE 30.4A SKU: X37D001 4600LBS

AIR CONTROL SPEC CAB LAB AIR BLOWER CABINET 2-DOOR BLOWER-CONTROL PERFORATED, OVERALL DIMENSIONS: 56"W X 35"D X 80-1/2"H, 2 DOORS, 6 - PERFORATED SHELVES, SHELF DIMENSIONS: 17"D X 55"W, CASTERS FOR EASY MOBILITY, 120VAC 60 HZ SINGLE PHASE, BLOWER SPEED CONTROL: LOW - HIGH

HEWLETT PACKARD 54622A OSCILLOSCOPE 100MHZ 250MSA/S MEGAZOOM WITH CRACKED COVERS - PARTS - MANUFACTURER: HEWLETT PACKARD HP MODEL: 54622A CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS SCOPE IS IN FAIR COSMETIC CONDITION, WITH LOTS OF SCUFFS/SCRATCHES ALL OVER, AND PAINT WRITING ON THE FRONT AND SIDES. THE FRONT PANEL BOTTOM CORNERS ARE BROKEN, AND THE FRONT COVER DOES NOT SIT STRAIGHT ON THE CASE. ONE FOOT IS BROKEN OFF THE BACK PANEL. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE GAVE THIS SCOPE A QUICK CHECK AND VERIFIED BOTH CHANNELS WILL AUTO SCALE UP TO 100MHZ. ALL THE BUTTONS AND KNOBS WORK. THE DISPLAY IS SURPRISINGLY BRIGHT WITHOUT NOTABLE BURN-IN. THE CLOCK BATTERY IS DEAD, SO IT GIVES THE SHOWN ERRORS AT FIRST POWER-ON. NO OTHER TESTING WAS DONE. THIS IS BEING SOLD AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1)A OSCILLOSCOPE SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: 54622A DIGITIZING OSCILLOSCOPE WITH MEGAZOOM 100MHZ, 200MSA/S 2 CHANNELS WITH SII DPU-414 PARALLEL PRINTER POWER INPUT: 100-240V 47-440HZ 100W

SIMCO AEROSTAT XC EXTENDED COVERAGE BENCHTOP IONIZING BLOWER WITH HEATER - MANUFACTURER: SIMCO MODEL: AEROSTAT XC CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS IONIZER IS IN FAIR TO POOR COSMETIC CONDITION WITH SCUFFS, SCRATCHES, AND GENERAL WEAR FROM A LIFETIME OF NEUTRALIZING STATIC. SPECIFICALLY, THE STAND ARMS HAVE BEEN BENT AND MODIFIED OVER THE YEARS, BUT STILL SUPPORTS THE IONIZER AND THE BASE IS FLAT. ADDITIONALLY, THE TOP RIGHT CORNER OF THE FRONT DASH IS SEPARATED FROM THE HOUSING (SEE PHOTOS). COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: WE POWERED UP THE IONIZER AND OBSERVED THE IONIZER LIGHT BRIGHTEN AND AIR FLOW FROM THE VENTS. THE AIR WARMED WHEN WE TOGGLED THE "WARM AIR" BUTTON AND THE AIR SPEED REACTED PROPERLY TO THE VARIATION OF "FAN SPEED" POSITIONS. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) SIMCO AEROSTAT XC EXTENDED COVERAGE BENCHTOP IONIZING BLOWER WITH HEATER SPECIFICATIONS: MANUFACTURER: SIMCO MODEL: AEROSTAT XC PN: 4002612 302G DESCRIPTION: IONIZER STATIC NEUTRALIZER EXTENDED COVERAGE BENCHTOP IONIZING BLOWER WITH HEATER 120VAC 60HZ 0.6A HIGH FAN/HEATER OFF 3.6A HIGH FAN / HEATER ON HEATER 350W DISCHARGE: 1.5 SEC @1';FAN SPEED HIGH (1000-100V) BALANCE: 0+/-5V COVERAGE AREA: 3' X 5' TO 2.5' X 6' AREA DIMENSIONS: 15.375W X 4.5H X 8.125D IN. WEIGHT: 17.5 LB. SKU: T19H004 2D-05-01(4) 21LBS - 22IN X 15IN X 15IN

[HORIBA CM-210-DC] HF HYDROFLUORIC ACID CONCENTRATION MONITOR CONTROLLER G0300VET - MANUFACTURER: HORIBA MODEL: CM-210-DC HYDROFLUORIC ACID CONCENTRATION MONITOR FLOW-TYPE SENSOR: G0300VET MEASURABLE RANGE: 0 - 1/2/5/10/20/50 MASS% REPEATABILITY/STABILITY: WITHIN +/-2% OF FULL SCALE RESPONSE TIME: 90% RESPONSE WITHIN 5 SECONDS SERIAL COMMUNICATION: RS-232C (18) SCREW TERMINALS DIMS: 8.25"(L) X 3.75"(W) X 3.75"(H)

[HP 6624A SYSTEM DC POWER SUPPLY] FOUR, 40 WATT OUTPUTS MAXIMUM OUTPUTS: CHANNELS 1 & 2: 7V 5A / 20V 2A CHANNELS 3 & 4: 20V 2A / 50V 0.8A TWO RANGES FOR EACH OUTPUT (0-7V AND 0-20V, 0-20V AND 0-50V) INDIVIDUALLY PROGRAMMABLE OUTPUTS REMOTE SENSE CAPABLE GPIB COMMUNICATIONS SIDE HANDLES (NO FEET) POWER INPUT REQUIREMENT: 100/120/220/240 50/60HZ. CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS POWER SUPPLY IS IN FAIR COSMETIC CONDITION WITH LOTS OF MINOR SCUFFS/SCRATCHES/STAINS FROM PRIOR USE. THE PLASTIC BRACKETS THAT HIDE THE ENDS OF THE HANDLES ARE CRACKED AND BROKEN. A FEW OUTPUT TERMINAL SCREWS ARE MISSING. THE FRONT PANEL ON THE TOP/RIGHT CORNER IS CHIPPED, AND THE TOP/RIGHT SIDE BRACKET ON THE SIDE OF THE FACEPLATE, TO SECURE THE FACEPLATE, IS MISSING/BROKEN OFF. THE NUTS WHERE A RACK MOUNTING EAR WOULD BOLT INTO ON THAT SIDE, ARE MISSING. THE BUTTONS FEEL LOOSE WHEN PRESSED, ESPECIALLY ON THE LEFT SIDE. THERE IS A SOUND OF SMALL PARTS RATTLING AROUND LOOSE INSIDE. THIS SUPPLY IS IN PARTIAL WORKING CONDITION. THE DISPLAY NEVER COMES ON. THE FAN WORKS. NO OTHER TESTING WAS DONE. THIS IS BEING SOLD AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 6624A SYSTEM DC POWER SUPPLY.

[22.8"LX 8"HX 5.5W] 3-SHELF LABORATORY FREEZER RACK STAINLESS STEEL W/EXTRA SHELF - MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY LABORATORY FREEZER RACK LENGTH: 22" WIDTH: 5.5" HEIGHT: 8" MATERIAL: STAINLESS STEEL 3-SHELF DESIGN INCLUDES (1) EXTRA SHELF FEATURES: LABEL SLOTS ON FRONT OF DRAWERS

[OPTOSIGMA] OPTOSIGMA 50X25MM LASER OPTICAL RAIL 240CM W/ (9) CARRIERS MIRRORS LENSES PRISMS. MANUFACTURER: OPTOSIGMA. MODEL: DOES NOT APPLY. CONDITION: USED. THIS LOT IS IN FAIR COSMETIC CONDITION. MOST OF IT IS PRETTY NICE, BUT A FEW PIECES HAVE BURNS FROM WHERE A LASER WAS MIS-AIMED AND CHARRED THE ALUMINUM, AND A COUPLE OF PIECES HAVE LIGHT YELLOW RESIDUES. A FEW BITS OF LOW-FRICTION TAPE IN THE CLAMPS ARE PEELING/TORN. WE ARE NOT SURE OF ANY SPECIFICATIONS OF ANY OF THE INCLUDED MOUNTED OPTICS! THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS LOT WAS REMOVED FROM A DECOMMISSIONED INDUSTRIAL MARKING LASER AND PLAYED WITH BRIEFLY TO SEE WHAT WE COULD DO WITH IT IN THE DARK (SEE PHOTOS). ALL THE MOUNTS CAN ATTACH AND REMOVE EASILY AND THE LASER WORKS. NO OTHER TESTING WAS DONE. IN ADDITION TO PROPER LABORATORY AND INDUSTRIAL USES, THIS WOULD MAKE A FUN DEMONSTRATOR TO SHOW A CLASS OF SCHOOL CHILDREN HOW TO BOUNCE LASERS AROUND A ROOM! NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) 150CM OPTOSIGMA MEDIUM RAIL SEGMENT (1) 50CM OPTOSIGMA MEDIUM RAIL SEGMENT (1) 40CM OPTOSIGMA MEDIUM RAIL SEGMENT (9) CARRIERS WITH MOUNTED OPTICAL ELEMENTS AS SHOWN SPECIFICATIONS: MANUFACTURER: OPTOSIGMA OPTICAL RAILS WITH CARRIERS AND OPTIC MOUNTS RAILS: MEDIUM (50 MM WIDE X 25 MM HIGH) TOTAL LENGTH OF RAIL: 240 CM (9) CARRIERS WITH VARIOUS OPTIC MOUNTS MOUNTS ARE CARRYING: (1) MELLES GRIOT BABYLASER (2) 40MM SQUARE PRISMS IN ROTATABLE MOUNTS (2) 25MM LENSES (4) 50MM MIRROR/BEAM SPLITTERS AT VARIOUS 45-DEGREE ANGLES MOUNTS FOR PRISMS AND LENSES HAVE 54MM CENTRAL OPENING, COULD ACCEPT 2" DIAMETER OPTICS GONIOMETER ADJUSTMENTS ON EVERYTHING! QUICK RELEASE CLAMPS ON ALL CARRIERS ALL ALUMINUM CONSTRUCTION SKU: X04D009 2I-02-04(1) 25LBS - 64IN X 12IN X 12IN

[USED] SIMCO 4009180 VISION CONTROLLER IONIZER 100-240VAC 50/60HZ 22W. THIS VISION CONTROLLER IS IN GOOD COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM REGULAR INDUSTRIAL USE. COMES IN NON-ORIGINAL PACKAGING. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). WE PLUGGED IN THIS CONTROLLER AND OBSERVED THE POWER LIGHT TURN ON. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. MANUFACTURER: SIMCO MODEL:80 DESCRIPTION: VISION CONTROLLER IONIZER 100-240VAC 50/60HZ 22W SKU: X06H014 2J-05-02(3) 5LBS - 10IN X 10IN X 6IN

[THERMO M75] AIR-COOLED WATER CHILLER - PARTS - MANUFACTURER: THERMO MODEL: M75 CONDITION: FOR PARTS OR NOT WORKING. THIS CHILLER IS IN GOOD COSMETIC CONDITION OVERALL, WITH MINOR BLEMISHES FROM PRIOR USE. THERE ARE SCUFFS/SCRATCHES OUTSIDE, AND WHITE DEPOSITS IN BOTH WATER LINES. THE MIDDLE INSET PICTURE IN PHOTO #5 SHOWS THE WHITE GUNK BUILD-UP WE FOUND IN A FITTING, WHEN WE REMOVED THE OLD LINES FROM THIS UNIT. WE ARE NOT SURE WHAT THIS MATERIAL IS, BUT EXPECT THAT THE CHILLER MAY BE CLOGGED UP WITH THIS WHITE STUFF INSIDE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE DO NOT HAVE 50HZ MAINS AND DO NOT WANT TO RISK BURNING UP ANY MOTORS, SO THIS CHILLER WAS NOT TESTED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) THERMO M75 CHILLER SPECIFICATIONS: MANUFACTURER: THERMOFISHER SCIENTIFIC BOM: 264225040000 SILICON THERMAL MODEL CH2400-LR MERLIN M75 LOW-TEMPERATURE REFRIGERATED CHILLER TEMPERATURE RANGE: -15O TO +35OC COOLING CAPACITY: 2156W 1.8 LITER RESERVOIR REFRIGERATION: R134A POWER: 230V 50HZ 1PHASE 10.1A NOT WORKING, PLEASE READ NOTES! SKU: R49D001 5A-10-01(1) 235LBS - 48IN X 40IN X 41IN

[VIA MEDICAL CORPORATION 302146 REV. B] AUTOTIMER PRINTER ASSEMBLY BOARD - MANUFACTURER: MEDICAL CORPORATION MODEL: 302146 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE AUTO-TIMER PRINTER IS IN GOOD CONDITION. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE AUTO-TIMER PRINTER WAS PULLED FROM A WORKING ENVIRONMENT. NO TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) VIA MEDICAL CORPORATION 302146 REV. B AUTOTIMER PRINTER SPECIFICATIONS: MANUFACTURER: MEDICAL CORPORATION MP/N: 302146 REVISION B MP/N: 302148 REVISION B AUTO-TIMER PRINTER SKU: O12N020 1D-08-02(4) 3LBS - 15IN X 12IN X 6IN