Electronic Lab Test Measurement Equipment Day 1 of 3 day event

[LEITZ WETZLAR] NPL 50X/0.65 DF MICROSCOPE OBJECTIVE LENS DARKFIELD - MANUFACTURER: LEITZ MODEL: 569238 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS LENS IS IN GOOD CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE BUT NOTHING THAT WOULD AFFECT FUNCTIONALITY. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS LENS WAS REMOVED FROM A WORKING MICROSCOPE SYSTEM AND IS IN GOOD WORKING CONDITION. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) LEITZ NPL 50X/0.658 MICROSCOPE OBJECTIVE LENS GERMANY SPECIFICATIONS: MANUFACTURER: LEITZ/ WETZLAR PART NO: 569238 MODEL NO: NPL DESCRIPTION: MICROSCOPE OBJECTIVE LENS 20X/0.65 DF /0 19MM THREAD MADE IN GERMANY SKU: X29S004 1E-07-02(1) 2LBS - 6IN X 6IN X 4IN

SCANLAB HURRYSCAN 25 2-AXIS LASER SCANNING HEAD FOR 1064NM UP TO 1500W W/ OPTICS. MANUFACTURER: SCANLAB. MODEL: HURRYSCAN 25. TYPE: HURRYSCAN 25 2-AXIS LASER SCANNING HEAD. APERTURE: 25 MM. WAVELENGTH: 1064 NM. MAXIMUM LASER POWER AT 100% DUTY CYCLE: 1500 WATTS WITH AIR COOLING. TYPICAL TUNING: FAST VECTOR TUNING. TACKING ERROR: 0.50 MS. MARKING SPEED RATING: 0.8 M/S. WRITING SPEED RATING: 260 CPS GOOD QUALITY, 170 CPS HIGH QUALITY. STEP RESPONSE TIME (SETTLING TO 1/1000 OF FULL SCALE: 1% 0.90 MS, 10% 3.20 MS. REPEATABILITY: < 2 RAD. MAXIMUM POSITIONING RESOLUTION: 18 BITS. NONLINEARITY: < 3.5 MRAD / 44. WATER-COOLED ENTRANCE APERTURE. AIR-COOLED GALVOS. LENS PHOTONIC DEVICES, UNKNOWN SPECIFICATION, FRONT ELEMENT HAS MARKING ON THE SIDE "5428AO-A". WITH REMOVABLE FILTER OVER FRONT ELEMENT. GONIOMETER-ADJUSTABLE INPUT MIRROR. ADJUSTABLE FOCUSING INPUT LENS, UNKNOWN SPECIFICATION, WITH ADJUSTMENT LOCKING RING. S/N: X03D002

[KIMBLE 73500-1275] 12X75MM BOROSILICATE GLASS CULTURE TUBES 6ML (1000) - MANUFACTURER: KIMBLE MODEL: 73500-1275 DISPOSABLE CULTURE TUBES CAPACITY: 6 ML OUTER DIAMETER: 12 MM LENGTH: 75 MM 1000/PER CASE SUITABLE FOR CELL WASHING PROCEDURES DESIGNED FROM ASTM SPECIFICATION E890 CONSTRUCTION: BOROSILICATE GLASS MADE IN GERMANY

NEW PLASTRONICS 40LQ50S16060-B 40-PIN IC BURN-IN/TEST SOCKET - MANUFACTURER: PLASTRONICS MODEL: 40LQ50S16060-B CONDITION: NEW OTHER. COMES IN NON-ORIGINAL PACKAGING. THIS TEST SOCKET IS BRAND NEW AND HAS BEEN REPACKAGED WITH ESD FOAM INSIDE OF AN ESD SAFE BAG. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) PLASTRONICS 40LQ50S16060-B BURN-IN/TEST SOCKET SPECIFICATIONS: MANUFACTURER: PLASTRONICS PART #: 40LQ50S16060-B DESCRIPTION: BURN-IN/TEST SOCKET LEAD COUNT: 40 CONDITION: NEW QUANTITY: 1 SKU: N12P016 1E-07-04(2) 2LBS - 6IN X 4IN X 4IN

[NATIONAL INSTRUMENTS PXI-1031] CHASSIS W/ PXI-8175, 6713, 6527, 6031E - MANUFACTURER: NATIONAL INSTRUMENTS NI MODEL: PXI-1031 CONDITION: USED. THIS CONTROLLER IS IN GOOD COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM REGULAR INDUSTRIAL USE AND COMES IN NON-ORIGINAL PACKAGING. PLEASE NOTE: THE HARD DRIVE HAS BEEN REMOVED TO MAINTAIN DATA SECURITY FOR THE PREVIOUS OWNER THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE POWERED ON THIS CONTROLLER AND OBSERVED IT BOOT UP WITH NO ERRORS AND LOAD THE SOFTWARE THE PREVIOUS OWNER WAS USING. ADDITIONALLY, WE CAN HEAR THE FAN RUNNING. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) PXI-1031 CHASSIS (1) PXI-8175 EMBEDDED CONTROLLER (1) PXI-6713 ANALOG OUTPUT (1) PXI-6527 DIGITAL I/O (1) PXI-6031E MULTI-FUNCTION I/O SPECIFICATIONS: MANUFACTURER: NATIONAL INSTRUMENTS MODEL: PXI-1031 P/N: 190871K-01L PXI CHASSIS WITH BACKPLANE AND POWER SUPPLY 4 SLOTS POWER: 100-240VAC 50/60HZ 4-2A PXI-8175 EMBEDDED CONTROLLER CPU: PENTIUM III 866MHZ 128 MB RAM MODULE INSTALLED HARD DRIVE IS NOT INCLUDED PXI-6713 ANALOG OUTPUT CARD 12-BITS 8 CHANNELS HIGH SPEED ANALOG OUTPUT PXI-6527 DIGITAL INPUT/OUTPUT CARD 24 SOLID STATE RELAY DIGITAL OUTPUTS 24 OPTICALLY ISOLATED DIGITAL INPUTS SWITCH UP TO 120MA SENSE DIGITAL LEVELS TO 28VDC PXI-6031E MULTIFUNCTION CARD 64 ANALOG INPUTS, 16-BIT 100KS/S 2 ANALOG OUTPUTS 8 DIGITAL INPUT/OUTPUTS 2 24-BIT COUNTERS SKU: X35D016 3A-08-02(1) 20LBS - 16IN X 16IN X 12IN

[MORITEX MML12-110D] MICRO MACHINE VISION 12X C LENS - MANUFACTURER: MORITEX MODEL: MML12-110D CONDITION: NEW OTHER. COMES IN OPENED, SHELF-WORN ORIGINAL PACKAGING. THE LENS IS IN VERY GOOD COSMETIC CONDITION. THE BOX HAS SOME DENTS AND HANDWRITING AS SHOWN. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) MORITEX MML12-110D LENS SPECIFICATIONS: MANUFACTURER: MORITEX MODEL: MML12-110D MICRO MACHINE (MACHINE VISION) LENS CAMERA MOUNT: C MAGNIFICATION: 12X VERY LONG WORKING DISTANCE: 110MM EFFECTIVE F/NO.: 135.1 DEPTH OF FIELD: 200M RESOLUTION: 10M TV DISTORTION: 0.1% OR LESS NA: 0.04 LARGEST COMPATIBLE CCD: 2/3" UNIFORM COAXIAL ILLUMINATION PORT (ON THE SIDE) TELECENTRIC ON OBJECT SIDE HIGH PERFORMANCE FIXED MAGNIFICATION LENS FOR ALIGNMENT AND PART RECOGNITION SMALL WITH LONG WORKING DISTANCE LENGTH: 19CM X 1.6CM DIAMETER EMPTY AREAS CAN BE USED FOR MOUNTING (AREAS WITH OPTICS NOT SUITABLE FOR MOUNTING CLAMPS) WEIGHT: 88G OTHER MARKINGS ON THE BOX: 4600-0067-02 A-0055 C500129P ROHS HJ SKU: R18D012 1B-21-04(10) 2LBS - 10IN X 10IN X 7IN

VWR 1365DP-2 DEPRYOGENATION OVEN MECHANICAL CONVECTION 5 CU.FT. 260C SHELDON - MANUFACTURER: VWR MODEL: 1365DP-2 CONDITION: USED. THIS OVEN IS IN FAIR COSMETIC CONDITION WITH RESIDUES AND SCUFFS/SCRATCHES FROM PRIOR USE. THE INSIDE HAS SOME BROWN DISCOLORATION. ONE OF THE SHELF-MOUNTING BRACKETS IS MISSING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS OVEN IS IN GOOD WORKING CONDITION. WE VERIFIED IT WILL HOLD STEADY AT A SETPOINT, AND THEN TURNED UP THE TEMPERATURE. IT ACCEPTED A SETPOINT OF 275O BUT THE OVER-TEMPERATURE SAFETY SET TO MAXIMUM TRIPPED AT 273O. THIS WAS WELL OVER THE MAXIMUM RATING OF 260O THOUGH, SO A GOOD PERFORMANCE OVERALL. THE INTERNAL FAN BLOWS A STRONG CURRENT IN THE CHAMBER. THE DOOR LATCHES SECURELY. THE TIMER COUNTS DOWN. AT VERY HIGH TEMPERATURES, AN UNPLEASANT ODOR COMES FROM THE OVEN. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) VWR 1365DP-2 OVEN SPECIFICATIONS: MANUFACTURER: SHELDON (FOR VWR) MODEL: 1365DP-2 PART NO.: 9070908 LABORATORY OVEN MECHANICAL HORIZONTAL CONVECTION EXTERIOR DIMENSIONS: 31.5" X 25.5" X 35"H INTERIOR DIMENSIONS: 23" X 21" X 18"H STAINLESS STEEL INTERIOR CAPACITY: 5 CUBIC FEET AIR FLOW: 144 LFM (EXHAUST CLOSED) TEMPERATURE RANGE: 40 TO 260 OC SPECIALLY DESIGNED FOR DEPRYOGENATION, LOOKS LIKE A GENERAL PURPOSE OVEN THOUGH (?) MICROPROCESSOR CONTROLLED LED TIMER FOR UP TO 99H59M COUNTS DOWN AND CUTS HEAT AT END OF RUN ADJUSTABLE OVERTEMPERATURE SAFETY POWER: 230V 1PHASE 60HZ 9A SKU: V14D004 5I-17-04(1) 225LBS - 48IN X 40IN X 53IN

GGB INDUSTRIES 34A-4-10 PICOPROBE REPLACEMENT PROBE TIPS (6) - MANUFACTURER: GGB INDUSTRIES MODEL: 34A-4-10 REPLACEMENT TIPS FOR MODEL 34A-4-10 S/N: S51A005 2L-01-03(3) 2LBS - 6IN X 6IN X 4IN

1000 GLOBAL SCIENTIFIC 113146Y 13MM POLYETHYLENE SNAP CAP - YELLOW SNAP CAP FOR USE WITH VACUUM AND GLASS TUBES 13MM YELLOW POLYETHYLENE (LDPE) NON-STERILE SKU: W12H035 1B-04-04(10) 3LBS - 16IN X 12IN X 7IN

[NATIONAL INSTRUMENTS NI PXI-1031] PXI MAINFRAME CHASSIS 4-SLOTS P/N: 190871N-01L. THIS CHASSIS IS IN FAIR COSMETIC CONDITION. FROM A FEW FEET AWAY IT LOOKS NICE. UP CLOSE YOU WILL NOTICE MOST OF THE CORNERS AND EDGES ARE SCUFFED/SCRATCHED/STAINED. THE BLUE PLASTIC TRIM UNDER THE FRONT PANEL IS CRACKED ON THE BOTTOM. THE LABEL ON THE BACK IS SLIGHTLY TORN. THE POWER LIGHT COMES ON, AND A LIGHT INSIDE CHANGES WHEN THE FAN SWITCH IS MOVED. THE FAN RUNS AT HIGH AND LOW SPEED WITH NORMAL FAN NOISES. MANUFACTURER: NATIONAL INSTRUMENTS MODEL: PXI-1031 PXI CHASSIS MAINFRAME WITH BACKPLANE AND POWER SUPPLY P/N: 190871N-01L 4 SLOTS POWER: 100-240VAC 50/60HZ 4-2A.

[HAMILTON SAFEAIRE 6' BENCH-TOP LAB FUME HOOD MISSING SIDE PANEL W/ TOP PANELS] FUME HOOD EPOXY RESIN COUNTER TOP 7 - TURN HANDLES & MATCHING AIR/GAS LINE HOOK-UP NOZZLES FRONT GLASS DOOR (CABLE WEIGHT CONTROLLED) 1 - INTERNAL FLUORESCENT LIGHT DIMENSIONS: EXTERNAL ENCLOSURE DIMENSIONS: HEIGHT: 55 1/2" LENGTH: 72" DEPTH: 34 1/4" INTERNAL ENCLOSURE DIMENSIONS: HEIGHT: 30 LENGTH: 62 1/2 DEPTH: 23" POWER: 115 VAC 60 HZ - MANUFACTURER: HAMILTON MODEL: SAFEAIRE CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS VENT HOOD IS IN USED CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE BUT NOTHING THAT SHOULD AFFECT FUNCTIONALITY. THE UNIT IS MISSING ONE OF THE SIDE PANELS. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: WE CONNECTED THE VENT HOOD TO POWER WITH A TEST CABLE AT 115 VAC AND OBSERVED IT FOR A FEW MINUTES. THE HOOD HAS LIGHTS BUT DOES NOT HAVE A FAN SYSTEM AND WILL NEED TO HAVE THAT HOOKED UP EXTERNALLY ON THE TOP. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HAMILTON SAFEAIRE 6 BENCH-TOP LAB FUME HOOD MISSING SIDE PANEL W/ TOP PANELS SPECIFICATIONS: SKU: X07O011 6-BILR1(1) 725LBS - 80IN X 43IN X 64IN

[LASOS LGK 7812 ML4 AR LASER HEAD 500MW] ZEISS 577009-2125-000 CABLE IS CUT!-PARTS - MANUFACTURER: LASOS LASERTECHNIK (CARL ZEISS) MODEL: LGK 7812 ML4 ZEISS NR.: 577009-2125-000 ARGON LASER REGULATORY MAXIMUM POWER: 500 MW WAVELENTH 450-530 NM CABLE IS CUT! SOLD AS-IS! SKU: W52D003 3A-08-02(1) 14LBS - 22IN X 15IN X 10IN

TEKTRONIX TLA7012 LOGIC ANALYZER PORTABLE MAINFRAME DUAL MONITOR PORTABLE MAINFRAME WITH OPTION 18 TOUCH SCREEN POWER REQUIREMENT: 100-240V 50-60HZ OR 115V 400HZ 750W. THE DISPLAY GOES BLACK AND STAYS BLACK. NOTHING ELSE HAPPENS. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) TEK TLA7012 PORTABLE MAINFRAME. SOLD AS-IS!

[AGILENT 81110A PULSE/PATTERN GENERATOR WITH (2) 81111A OUTPUT MODULES] MANUFACTURER: AGILENT TECHNOLOGIES MODEL: 81110A DESCRIPTION: PULSE-/PATTERN GENERATOR NUMBER OF CHANNELS: 2 WITH (2) 81111A MODULES INSTALLED FREQUENCY RANGE: 1 MHZ ... 165 MHZ SINGLE-ENDED BNC OUTPUTS TRIGGERABLE / PLL OPERATION SELECTABLE PULSE/BURST/PATTERN MODES SELECTABLE SELF-CAL FOR IMPROVED TIMING ACCURACY SELECTABLE EDGES, 800 PS OR 1.6 NS OUTPUT IMPEDANCE: 50 OHMS PROVIDES UP TO 3.8 VPP INTO 50 OHMS VARIABLE DELAY RANGE: 1.515 ... 999.5 S WITH FEET AND BUMPERS FRONT-AND-BACK POWER: 100-120 V, 50-60HZ/400HZ , OR 200-240 V, 50-60 HZ, 170VA

20-SPACE ADJUSTABLE LABORATORY FREEZER RACK 22"L X 11"H X 5.25"W NO DRAWERS - MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE RACK IS IN GOOD, USED CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE RACK WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) 20-SPACE STAINLESS STEEL LABORATORY FREEZER RACK 22"L X 11"H X 5.25"W NO DRAWERS SPECIFICATIONS: MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY LABORATORY FREEZER RACK SHELVING UNIT ADJUSTABLE, REMOVABLE SHELVES HORIZONTAL ORIENTION TOTAL LENGTH: 22" TOTAL HEIGHT: 11" DEPTH/WIDTH: 5.25" CONSTRUCTION: STAINLESS STEEL 20-SPACE DESIGN

[HP 6624A SYSTEM DC POWER SUPPLY] FOUR, 40 WATT OUTPUTS MAXIMUM OUTPUTS: CHANNELS 1 & 2: 7V 5A / 20V 2A CHANNELS 3 & 4: 20V 2A / 50V 0.8A TWO RANGES FOR EACH OUTPUT (0-7V AND 0-20V, 0-20V AND 0-50V) INDIVIDUALLY PROGRAMMABLE OUTPUTS REMOTE SENSE CAPABLE GPIB COMMUNICATIONS SIDE HANDLES (NO FEET) POWER INPUT REQUIREMENT: 100/120/220/240 50/60HZ - MANUFACTURER: HEWLETT PACKARD HP MODEL: 6624A CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THE FRONT/LEFT CORNER TOOK A HUGE HIT, AND THE FRONT PANEL IS ALL MESSED UP. SOME LOOSE BITS CAN BE HEARD RATTLING AROUND LOOSE, INSIDE THE UNIT. THE KEYBOARD IS LOOSE, AND SOME OF THE KEYS PRESS INTO THE FACE PLATE! THIS POWER SUPPLY IS OTHERWISE IN FAIR COSMETIC CONDITION WITH LOTS OF MINOR SCUFFS/SCRATCHES/STAINS FROM PRIOR USE. ONE RACK MOUNT TAB IS MISSING. THE OUTPUT TERMINAL FOR #3 HAS A BROKEN PLASTIC DIVIDER TAB. SEVERAL SCREWS ARE MISSING FROM THE OUTPUT TERMINALS. THIS SUPPLY IS IN PARTIAL WORKING CONDITION. WE TESTED ALL FOUR CHANNELS AND VERIFIED THEY WILL GIVE MAXIMUM RATED VOLTAGE AT NO LOAD. THE DISPLAY WORKS. THE FAN WORKS. THE KEYBOARD WILL SOMETIMES GIVE A DOUBLE-PRESS WHEN A KEY IS PUSHED, AND OPERATION OF THE OUTPUT SELECT KEY IS INTERMITTENT. WE ARE NOT ABLE TO TEST THE HP-IB INTERFACE. NO OTHER TESTING WAS DONE. THIS IS BEING SOLD AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 6624A SYSTEM DC POWER SUPPLY

[UNBRANDED] [DOES NOT APPLY] 22"L X 2.25"H X 5.25"W 4-SEGMENT LABORATORY FREEZER RACK DRAWERS SS (4) - MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE DRAWERS ARE IN GOOD, USED CONDITION WITH SOME SCUFFS AND SCRATCHES FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE RACK WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (4) 22"L X 2.25"H X 5.25"W 4-SEGMENT LABORATORY FREEZER RACK DRAWERS SS SPECIFICATIONS: MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY LAB FREEZER RACK DRAWERS FRONT HANDLES 4-SEGMENT, OPEN SPACES LENGTH: 22" HEIGHT: 2.25" WIDTH: 5.25" CONSTRUCTION: STAINLESS STEEL

[UVP] B-100Y HANDHELD UV INSPECTION LAMP 115V 60HZ 2.5A - NO BULB - MANUFACTURER: UVP MODEL: B-100Y CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS INSPECTION LAMP IS IN FAIR COSMETIC CONDITION WITH SCUFFS, SCRATCHES, AND DOME DAMAGE FROM COMMERCIAL USE. THE HANDLE HAS A CHUNK BROKEN OFF THE TOP, AND THE BACK HOUSING TO THE HANDHELD LAP IS CRACKED IN MULTIPLE LOCATIONS (SEE PHOTO). THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS TAKES A TYPE OF LAMP THAT WE DON'T HAVE, SO WE WERE NOT ABLE TO PERFORM COMPLETE OPERATIONAL TESTING. WE PUT A VOLTMETER ON THE LAMP SOCKET AND FOUND ABOUT 260VAC. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) UVP B-100Y HANDHELD UV INSPECTION LAMP 115V 60HZ 2.5A SPECIFICATIONS: MANUFACTURER: UVP MODEL: B-100Y DESCRIPTION: HANDHELD UV INSPECTION LAMP 115V 60HZ 2.5A NO BULB INCLUDED SKU: Y16H002 4B-03-02(1) 14LBS - 22IN X 15IN X 15IN

1991 ENVIROTRONICS ST3.5H BURN-IN OVEN 220V 1PHASE 250*C INCOMPLETE - PARTS - MANUFACTURER: ENVIROTRONICS MODEL: ST3.5H CONDITION: FOR PARTS OR NOT WORKING. THIS UNIT IS IN FAIR COSMETIC CONDITION. THE METAL INTERIOR IS ALL STAINED YELLOW. THE OUTSIDE HAS LOTS OF SCUFFS/SCRATCHES/RESIDUES ALL OVER. THERE ARE SOME BROKEN CONNECTORS ON THE BACK PANEL. THE MAIN PROBLEM WITH THIS UNIT IS ALL THE ELECTRONICS HAVE BEEN REMOVED. THIS IS THE SHELL WITH A BLOWER AND HEATERS, PLUS AN OVERTEMPERATURE SAFETY AND SOME TEST CONNECTIONS IN THE BACK. THIS IS NOT A COMPLETE OVEN. IT IS SOLD FOR PARTS, AS-IS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS OVEN IS NOT WORKING! WE MEASURED 62, 63, AND 63 OHMS ACROSS THE THREE HEATERS. THE BLOWER WHEEL SPUN WHEN ROTATED BY HAND, BUT THE MOTOR DOES NOT TURN WHEN POWER IS APPLIED DIRECTLY TO THE MOTOR. THE DOOR CLOSES SECURELY. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ENVIROTRONISC ST3.5H BURN-IN OVEN SPECIFICATIONS: MANUFACTURER: ENVIROTRONICS MODEL: ST3.5H BURN-IN OVEN BRANDED AS A MICRO-INSTRUMENT CO. BURN IN SYSTEM TEMPERATURE RANGE: AMBIENT TO +250OC POWER: 220V 1PHASE 50HZ AS-CONFIGURED USABLE INTERIOR DIMENSIONS: 27"W X 16"D X 13"H TOP-DOWN FORCED CONVECTION RESISTIVE HEATING ELEMENTS PERFORATED MESH CHAMBER FLOOR REAR WALL IS (12 PIECES) MICRO INSTRUMENT E/M B/B MODULE 220-204687-007 MOTOR IS DEAD CONTROL ELECTRONICS ARE MISSING MANUFACTURED: 1991 SOLD AS-IS SKU: X14D034 6-BILR1(1) 480LBS - 67IN X 43IN X 40IN

[ATEQ F2P] AIR LEAK DETECTOR CHECKER, REF. 103.00, FOR PARTS OR NOT WORKING. TESTER IS IN FAIR COSMETIC CONDITION WITH SCUFFS/SCRATCHES/ADHESIVE LABEL RESIDUE. AIR PRESSURE REGULATOR IS MISSING. BOTTOM PANEL IS BENT WITH A SMALL CUT AND DENTED FITTINGS. LISTED AS/IS. ASSUMED FAULTY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS INCLUDED. INCLUDED: (1) ATEQ F2P PRESSURE TESTER. SPECIFICATIONS: MANUFACTURER: ATEQ, MODEL: F2P, REF. 103.00 PRESSURE TESTER AS/IS. SKU: V51D025 1B-23-03(1) 25LBS - 18IN X 18IN X 11IN

[THORLABS B120180B] BREADBOARD WITH LEGS 1200 MM W X 1800 MM L X 110 MM H THE LEGS ARE 31 1/8" TALL (NOT INCLUDING BREADBOARD) THE HOLES ARE THREADED IN M6-1.0 20MM SPACE BETWEEN HOLES TOTAL WEIGHT: 490 LBS. INCLUDES: (1) THORLABS 1200MM X 1800 MM X 110MM OPTICAL BREADBOARD TABLE M6-1.0 W/AIR SPRINGS. MINOR SCUFFS, SCRAPES, AND MARKINGS FROM PREVIOUS USE.

ULINE S-22137 DELUXE SURGICAL MASK (300) MANUFACTURER: ULINE MODEL: S-22137 DESCRIPTION: DELUXE SURGICAL MASK 300 TOTAL MASKS (1 CASE WITH 6 BOXES, 50 PER BOX) FOAM NOSE STRIP EXTRA THICK EAR-LOOPS FLUID RESISTANT 99% BACTERIAL FILTRATION EFFICIENCY SKU: Y28U011

[MEIJI EMZ-5 STEREO ZOOM MICROSCOPE W/BOOM STAND/SCHOTT FIBER LIGHT] MANUFACTURER: MEIJI TECHNO MODEL: EMZ-5 CONDITION: REFURBISHED BY SELLER. COMES IN NON-ORIGINAL PACKAGING. THE SCOPE HEAD AND EYEPIECES ARE IN GOOD COSMETIC AND WORKING CONDITION. THE INTERNAL OBJECTIVE POSTS HAVE BEEN PROFESSIONALLY CLEANED/LUBRICATED BY OUR MICROSCOPE TECHNICIAN. THE BOOM BASE HAS SOME PAINT CHIPS AND SMALL AREAS OF DISCOLORATION. ALL OF THE ITEMS HAVE SOME COSMETIC SCUFFS, SCRATCHES AND SIGNS OF NORMAL USE/WEAR. HOWEVER, THIS DOES NOT AFFECT FUNCTIONALITY. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE VIEW THROUGH THE SCOPE IS CLEAR AND ALIGNED WITH NO CHIPS, CRACKS OR FLAWS IN ANY OF THE OPTICS (THE LAST PHOTO SHOWS THE ACTUAL LOW AND HIGH MAGNIFICATION VIEW THROUGH THIS SCOPE). THE FIBER OPTIC ILLUMINATOR ADJUSTS THROUGH ITS PROPER LOW LIGHT TO BRIGHT LIGHT RANGE. ALL OF THE ZOOM CONTROLS, FOCUS MOUNT AND BOOM STAND MECHANICS FUNCTION NORMALLY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) MEIJI EMZ-5 MICROSCOPE HEAD (2) MEIJI SWF10X SUPER WIDEFIELD EYEPIECES (1) MEIJI F-HOLDER FOCUS MOUNT (1) MEIJI S-TYPE BOOM STAND (S-4100) (1) MEIJI BOOM STAND RING LOCK (1) MEIJI MA517 0.5X AUXILIARY OBJECTIVE LENS (1) SCHOTT DCR III PLUS FIBER OPTIC LIGHT SOURCE (EKE 20871) (1) SCHOTT-FOSTEC FIBER RING LIGHT (1) NEW POWER CORD FOR LIGHT SOURCE (1) COPY OF MEIJI EMZ SERIES MANUAL SPECIFICATIONS: MANUFACTURER: MEIJI TECHNO, JAPAN MODEL: EMZ-5 ZOOM RATIO: 6:5:1 ZOOM RANGE: 0.7X - 4.5X FIELD OF VIEW: 32MM - 5.1MM EYETUBE INCLINATION: 45O ZOOM CONTROL: DUAL, GRADUATED BODY-MOUNTED SIDE ZOOM CONTROLS BODY: BINOCULAR/STEREO HEAD, 360O ROTATION MAGNIFICATION: 3.5X - 22.5 (7X - 45X WITHOUT AUXILARY OBJECTIVE) WORKING DISTANCE: 150MM (93MM WITHOUT AUXILARY OBJECTIVE) ADJUSTABLE INTERPUPILLARY DISTANCE: 54MM - 75MM DUAL DIOPTRIC ADJUSTMENT: +/-5 DIOPTERS MAIN BOOM POST IS 15.75" (400MM) DOUGDEALS FACTOID: MEIJI MICROSCOPES ARE NAMED AFTER EMPEROR MUTSUHITO MEIJI (MEANING "THE ENLIGHTENED RULER"). DURING JAPAN'S MEIJI PERIOD (1868-1912), EMPEROR MEIJI MOVED FROM KYOTO (THE OLD CAPITAL OF JAPAN) TO TOKYO - WHICH BECAME THE NEW CAPITAL AND REMAINS SO TO THIS DAY. SKU: Y41V001 3B-03-01(1) 58LBS - 25IN X 19IN X 16IN

[USTC 205000LC] AIR-COOLED WATER CHILLER 230V 1PHASE WITH COPELAND CONDENSING UNIT - MANUFACTURER: UNITED STATES THERMOELECTRIC CONSORTIUM USTC MODEL: 205000LC. THIS CHILLER IS IN FAIR OVERALL COSMETIC CONDITION WITH MINOR BLEMISHES FROM PRIOR USE. THERE ARE LOTS OF DENTS/SCRATCHES/DINGS ON THE COVER PANELS, AND LOTS OF SPOTS OF MINOR SURFACE CORROSION WHERE THE SCRATCHES GO ALL THE WAY THROUGH THE PAINT. SEVERAL COVER SCREWS ARE MISSING. THIS CHILLER IS IN PARTIAL WORKING CONDITION. THE PUMP PROVIDES A STRONG STREAM FROM THE OUTPUT FITTING, AND THE DIGITAL CONTROLLER WORKS, BUT THE REFRIGERATION IS NOT COOLING. WE CAN HEAR THE COMPRESSOR RUNNING, BUT IT DOES NOT COOL THE WATER. DURING A FEW MINUTES OF RUNNING, THE TEMPERATURE OF THE WATER IN THE RESERVOIR WENT UP TWO DEGREES :( INSTEAD OF DOWN. WE ARE NOT SURE WHY. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) USTC 205000LC CHILLER SPECIFICATIONS: MANUFACTURER: UNITED STATES THERMOELECTRIC CONSORTIUM MODEL: 205000LC REFRIGERATED RECIRCULATING WATER CHILLER AIR-COOLED CONDENSING UNIT: COPELAND FTAH-A100-CAV-240 COMPRESSOR: COPELAND RR10K1E-CAV-101 REFRIGERANT: R134A POWER: 208-230V 60HZ 1PHASE 20A SKU: S51D001 5C-16-01(1) 275LBS - 48IN X 40IN X 50IN

[HP 8657A-002 SIGNAL GENERATOR] 100KHZ -1.04GHZ +13DBM TO -143DBM WITH HP-IB GPIB. MANUFACTURER: HEWLETT PACKARD HP MODEL: 8657A. THIS GENERATOR IS IN FAIR COSMETIC CONDITION WITH LOTS OF SCUFFS/SCRATCHES/RESIDUES FROM PRIOR USE, AND SOME ADHESIVE LABEL RESIDUES. THE FRONT HAS LOTS OF LITTLE SPOTS OF MISSING PAINT AND SMALL DINGS AROUND THE FRONT EDGE. THE POWER BUTTON HAS SMALL AMOUNTS OF PLASTIC WORN AWAY AROUND THE CORNERS. THE TOP COVER WAS LOOSE FOR UNKNOWN REASONS. EVERYTHING LOOKED OKAY INSIDE, AND IT IS SUSPECTED THE COVER CAME OFF BECAUSE THE COVER SCREWS' PLASTIC PARTS ARE BROKEN OFF. THERE IS A VERY FADED LABEL ON THE FRONT, WHICH WAS ENHANCED AND PUT IN THE LAST PICTURE, THE PREVIOUS OWNER LABELED THIS "LOSS W/ FM .8 DB, LOSS W/O FM 3.2 DB". THIS GENERATOR IS IN GOOD WORKING CONDITION AS FAR AS TESTED. OPERATION VERIFIED FROM 10KHZ TO 1040MHZ, WITH AM AND FM. SOLID SIGNALS OBSERVED FROM -70 TO +10 DBM USING AN OSCILLOSCOPE. CONTROLS RESPONDED TO USER INPUTS. THE DISPLAY IS BRIGHT AND CLEAR. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 8657A SIGNAL GENERATOR. SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL 8657A SIGNAL GENERATOR RANGE: 100KHZ TO 1.04GHZ WIDE DYNAMIC RANGE: +13 TO -143.5DBM WITH PROGRAMMABLE AM AND FM MODULATION ABILITIES FULL HP-IB (IEEE-488) PROGRAMMABILITY LOW RESIDUAL FM REAR PANEL OUTPUT 50 N TYPE CONNECTOR (OPTION 002). SKU: Y36D017 1D-01-01(1) 41LBS - 25IN X 25IN X 12IN

1991 PARTICLE MEASURING SYSTEM LASAIR 510 PARTICLE COUNTER .5 - 10.0 MICRONS S/N: 23233-0191-75 POWER: 115VAC 60 HZ 3.5 AMPS LASER PRODUCT PAPER PRINT-OUT 52LBS - 25IN X 19IN X 16IN

[NTA INDUSTRIES 3106C1] ULTRACLEAN BRUSHED STAINLESS STEEL 48"W DUAL LEAN RAIL - MANUFACTURER: NTA INDUSTRIES MODEL: 3106C1 CONDITION: USED. COMES IN NON ORIGINAL PACKAGING. THIS CLEAN ROOM RAILING IS IN GOOD CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM PRIOR USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) NTA INDUSTRIES 3106C1 ULTRACLEAN BRUSHED STAINLESS STEEL DUAL LEAN RAILING SPECIFICATIONS: MANUFACTURER: NTA INDUSTRIES MODEL: 3106C1 ULTRACLEAN DUAL LEAN RAILING MATERIAL: STAINLESS STEEL RAIL CONFIGURATION: DUAL FLOOR MOUNTABLE (4 HOLES) RAIL 1: 48"W X 36"H RAIL 2: 48"W X 24"H RAILS ARE 5" APART SKU: Q19Y022 6-TRL 27(1) 190LBS - 56IN X 40IN X 50IN

[RADIOMETER PHYSICS] FS-Z90 HARMONIC MIXER W/ SAGE STA-10-12-F2 & SAR-2507-12-S2 - MANUFACTURER: RADIOMETER PHYSICS MODEL: FS-Z90 CONDITION: USED. COMES IN THE ORIGINAL CASE. THE COMPONENTS ARE IN GREAT CONDITION, WE THINK THIS HARMONIC MIXER MIGHT BE NEW BUT WE ARE LISTING IT AS USED AS WE CAN'T BE CERTAIN. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) RADIOMETER PHYSICS FS-Z90 HARMONIC MIXER (1) SAGE STA-10-12-F2 E-BAND FIXED ATTENUATOR (1) SAGE SAR-2507-12-S2 WR-12 WAVEGUIDE RECTANGULAR HORN ANTENNA (1) ROHDE & SCHWARZ USB DRIVE WITH CALIBRATION CERTIFICATION (1) SCREWDRIVER (1) ALLEN KEY (2) SMA MALE-TO-MALE CABLES SPECIFICATIONS: MANUFACTURER: RADIOMETER PHYSICS (ROHDE & SCHWARZ) MODEL: FS-Z90 DESCRIPTION: HARMONIC MIXER FREQUENCY RANGE [GHZ] 60 - 90 RF PORT WR12 (UG387/UM) IF & LO INTERFACE SMA-F LO HARMONIC NO. 6 LO FREQUENCY [GHZ] 7.44 TO 15.34 LO POWER RANGE [DBM] +13.5 TO +16 IF FREQUENCY [GHZ] 5 MHZ TO 6.0 GHZ RF VSWR 1.4:1 (TYP.) 1 DB COMPR. POINT [DBM (TYP.)] -6 MAX. RF INPUT POWER [DBM] +0 CONVERSION LOSS [DB] 60 GHZ FRF 78 GHZ: MAX. 22, TYP. 16 78 GHZ FRF 90 GHZ: MAX. 28, TYP. 21 TRACEABLE STANDARDS FULLY REFERENCED MANUFACTURER: SAGE MODEL: STA-10-12-F2 DESCRIPTION: E-BAND FIXED ATTENUATOR MINIMUM FREQUENCY 60 GHZ MAXIMUM FREQUENCY 90 GHZ ATTENUATION 10 DB @ 75 GHZ VSWR 1.2 POWER HANDLING 0.50 W RF PORT WR-12 WAVEGUIDE ATTENUATOR TYPE FIXED MANUFACTURER: SAGE MODEL: SAR-2507-12-S2 DESCRIPTION: WR-12 WAVEGUIDE RECTANGULAR HORN ANTENNA MINIMUM FREQUENCY 60 GHZ MAXIMUM FREQUENCY 90 GHZ GAIN 25 DBI 3 DB BEAMWIDTH, E-PLANE 9 3 DB BEAMWIDTH, H-PLANE 10 RETURN LOSS 23 DB ANTENNA PORT WR-12 WAVEGUIDE SKU: Y34S025 1D-06-02(1) 5LBS - 12IN X 12IN X 6IN

SMC NCY2B15H-1000 PNEUMATIC AIR CONTROL. COMES IN NON-ORIGINAL PACKAGING. THIS PNEUMATIC AIR CONTROL HAS SOME MINOR SCUFFS, SCRATCHES, AND DISCOLORATION FROM NORMAL USE BUT NOTHING SIGNIFICANT THAT WOULD AFFECT FUNCTIONALITY. THIS PNEUMATIC AIR CONTROL WAS PULLED FROM DECOMMISSIONED EQUIPMENT IN A WORKING ENVIRONMENT. INCLUDED: (1) SMC PNEUMATICS NCY2B15H-1000 AIR CYLINDER 5/8" BORE/10" STROKE SPECIFICATIONS: MANUFACTURER: SMC CYLINDER MODEL: NCY2B15H-1000 DESCRIPTION: PNEUMATIC AIR CYLINDER MAX PRESSURE: 100 PSI 0.70 MPA STROKE: 10" STROKE BORE: 5/8" BORE

HP HEWLETT PACKARD 3457A 6.5 / 7.5 DIGIT BENCH TOP/SYSTEM DIGITAL MULTIMETER - MANUFACTURER: HEWLETT PACKARD HP MODEL: 3457A CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS METER IS IN FAIR OVERALL COSMETIC CONDITION WITH MINOR BLEMISHES FROM PRIOR USE INCLUDING SCUFFS/SCRATCHES, STAINS AND REMNANTS OF ADHESIVE LABELS. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS METER IS IN GOOD WORKING CONDITION AS FAR AS WE CAN TEST. SELF-TEST RETURNS AN "OK" RESULT. READINGS FROM THE FRONT INPUTS ON THE DC VOLTS, AC VOLTS, DC CURRENT, AC CURRENT, FREQUENCY, 2-WIRE AND 4-WIRE OHMS WERE CLOSE TO THE READINGS WE WOULD GET ON OUR REFERENCE METER. WITH THE INPUTS DISCONNECTED, VOLTAGE READINGS WERE IN THE LOW SINGLE-DIGITS VOLTS; WE THINK THIS IS COMMON/NORMAL FOR THIS TYPE OF METER. WE ARE NOT ABLE TO TEST THE HP-IB INTERFACE. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 3457A MULTIMETER SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: 3457A BENCHTOP OR SYSTEM MULTIMETER WITH HP-IB COMMUNICATIONS WITH FRONT AND REAR PANEL INPUTS 6.5-DIGITS DIGITAL LCD DISPLAY MEASURES DC AND AC VOLTS, DC AND AC CURRENT, 2 AND 4 WIRE OHMS, FREQUENCY/PERIOD 1350 READINGS/SECOND FOR 3.5 DIGITS, 1 READING/4 SECONDS FOR 7.5 DIGITS INCLUDES PLUGIN 44491A RELAY MULTIPLEXER, WITHOUT CONNECTOR SKU: Y39D002 1B-20-03(1) 13LBS - 22IN X 15IN X 8IN

THERMCO SYSTEMS TMS211022A ELBOW HEATER JACKETS - LOT OF 4 - MANUFACTURER: THERMCO SYSTEMS MODEL: TMS211022 AMAT PART #: 907951-001 DESCRIPTION: 30A ELBOW HEATER JACKETS VOLTAGE: 120 VOLTS WATTAGE: 475 WATTS AMPERAGE: 3.96A PHASES: 1-PHASE TOTAL WEIGHT: 7.45 LBS. QUANTITY: 4 JACKETS SKU: M33P023

ION SYSTEMS 4210UN IN-LINE GAS NITROGEN IONIZER 120VAC STEADY-STATE DC ION. THIS IONIZER IS IN GOOD COSMETIC CONDITION WITH SCUFFS AND SCRATCHES FROM NORMAL INDUSTRIAL USE. COMES IN NON-ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. WE POWERED ON THIS IONIZER AND OBSERVED THE GREEN LIGHT TURN ON YOU CAN HEAR A SLIGHT BUZZING SOUND AND WHEN THE AIR WAS APPLIED TO THE INTAKE THE SMELL OF OZONE COULD BE SMELLED. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ION SYSTEMS 4210UN IN-LINE GAS NITROGEN IONIZER 120VAC STEADY-STATE DC ION SPECIFICATIONS: MANUFACTURER: ION SYSTEMS MODEL: 4210UN DESCRIPTION: IN-LINE GAS NITROGEN IONIZER 120VAC 50/60HZ STEADY-STATE DC ION EMISSIONS 2.4D X 4.75L X 3.13W (6.1D X 12.1L X 8.0W CM). SKU: W44H024 1E-01-02(1) 5LBS - 8IN X 8IN X 7IN

[2000-2030] CDI TORQUE PRODUCTS 501-I-ETT ELECTRONIC TORQUE TESTER 5-50 IN.LB. S/N: 1B-04-02(1) - MANUFACTURER: CDI TORQUE PRODUCTS MODEL: 501-I-ETT ELECTRONIC TORQUE TESTER TORQUE RANGE: 5-50 IN.LB., 5.65-56.5 DNM MEASURES PEAK OR INSTANTANEOUS TORQUE IN EITHER DIRECTION DIGITAL INDICATION 1/4" DRIVE JOINT RATE SIMULATOR ALLOWS TESTING OF POWER TOOLS, CAN SIMULATE HARD/MEDIUM/SOFT JOINT RATES. INCLUDED: (1) CDI 501-I-ETT TORQUE TESTER (1) POWER SUPPLY (1) 900-0 JOINT RATE SIMULATOR.

[AGILENT TECHNOLOGIES] N6700B 4-SLOT 400W LOW-PROFILE MPS MODULAR POWER SUPPLY MAINFRAME DENTS. THIS MAINFRAME IS IN FAIR COSMETIC CONDITION WITH MINOR BLEMISHES FROM PRIOR USE. THERE ARE LOTS OF SCUFFS/SCRATCHES, MOSTLY ON TOP OF THE WHITE PART NEAR THE FRONT. OVER THE INPUT POWER SECTION AND OVER THE KEYPAD AREA, THERE ARE DENTS. THERE ARE ALSO SCUFFS/SCRATCHES/RESIDUES ELSEWHERE, ALL OVER REALLY, FROM PRIOR USE. THIS MAINFRAME IS IN GOOD WORKING CONDITION. WE USED FOUR DC POWER MODULES FOR TESTING, AND THESE ARE NOT INCLUDED. WITH THE MODULES INSTALLED, THIS MAINFRAME WAS ABLE TO CONTROL AND GIVE POWER FROM ALL FOUR LOCATIONS, CORRECTLY IDENTIFYING THE MODULES AS SHOWN. NO ERRORS WERE RECORDED IN THE SYSTEM. CONTROLS RESPONDED TO USER INPUTS AS EXPECTED. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AGILENT 6700B MPS MAINFRAME SPECIFICATIONS: MANUFACTURER: AGILENT TECHNOLOGIES MODEL: N6700B MODULAR POWER SUPPLY MAINFRAME COMPACT DIMENSION: 1U HIGH (4) SLOTS, ACCEPTS UP TO (4) N6700-SERIES DC POWER MODULES IN ANY COMBINATION UP TO 400 WATTS OUTPUT (DEPENDS ON INSTALLED MODULES) GPIB, ETHERNET AND USB INTERFACES LXI COMPLIANT BACKLIT LCD DISPLAY INPUT POWER: 100-240V 50/60/400HZ 1000VA MAXIMUM. SKU: X35D022 3A-10-02(1) 20LBS - 27IN X 22IN X 6IN

2007 LASOS LGK 7786 GREEN HE-NE LASER TUBE HEAD WITH 7640 AC INPUT POWER SUPPLY - MANUFACTURER: LASOS MODEL: LGK 7786 P. INCLUDED: (1) LASOS LGK7786P HENE LASER (1) LASOS LGN7460A POWER SUPPLY. SPECIFICATIONS: MANUFACTURER: CARL ZEISS/LASOS LASERTECHNIK GMBH. LASER HEAD MODEL: LGK 7786 P. ZEISS NR. 577009-1136-000. HELIUM-NEON LASER. REGULATORY MAXIMUM OUTPUT: 5 MW. WAVELENGTH: 543NM. MANUAL SHUTTER ON OUTPUT END. BOLT-DOWN MOUNTING FEET HOT-GLUED TO THE TUBE. POWER SUPPLY MODEL: LGN 7460 A. INPUT: 115/230V 50-400HZ 0.55A. OUTPUT: 2200-2600VDC 6.5MA. COMPACT DIMENSIONS: 11 X 8 X 3 CM. THROUGH-HOLES FOR BOLT-DOWN MOUNTING.

TEKTRONIX TLA7AA4 LOGIC ANALYZER MODULE 136 CHANNELS CONFIGURATION: DS TIMING: 8 GHZ STATE SPEED: 450 MHZ MEMORY DEPTH: 8M FOR USE WITH TLA700 SERIES

[EDWARDS/TEMESCAL] VES-2550 E-BEAM EVAPORATOR 3-PHASE 208V CV-6SLX (6024-7110-0) - MANUFACTURER: EDWARDS MODEL: VES-2550 CONDITION: USED. THIS SETUP IS IN NICE CONDITION WITH THE USUAL MARKS FROM NORMAL USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: NO TESTING WAS PERFORMED. FILAMENT ASSEMBLIES ARE MISSING FROM THE TWO LARGE CRUCIBLES. THE CONDITION OF THE FILAMENT ASSEMBLY ON THE FOUR POSITION HEARTH IS UNKNOWN. HEARTH POSITIONS ARE LABELED NICKEL, ALUMINUM, AND MAGNESIUM FLUORIDE. THE SYSTEM WAS USED FOR OPTICAL COATINGS. THE SUBSTRATE HOLDER AND SHUTTERS ARE MISSING AND THERE IS NO HELIUM COMPRESSOR. PLEASE ASK QUESTIONS AS NEEDED; WE HAVE NOT RUN THE SYSTEM. PLEASE NOTE: NO CHILLER OR HELIUM COMPRESSOR IS INCLUDED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) E-BEAM EVAPORATOR (2) EQUIPMENT RACKS (1) ROUGH PUMP (1) CTI 10 CRYO-TORR CRYO PUMP (NO COMPRESSOR) (1) PARTIAL MANUAL SPECIFICATIONS: MANUFACTURER: EDWARDS/TEMESCAL MODEL: VES-2550 POWER REQUIREMENT: 208V/70A THREE PHASE 3 STATION BEAM TEMESCAL SOURCE: TWO HEARTHS WITH A SINGLE LARGE CRUCIBLE EACH AND ONE HEARTH WITH A FOUR POSITION ROTATABLE CRUCIBLE. ALL HEARTHS ARE TEMESCAL. TEMESCAL CV-6SLX POWER SUPPLY MANUFACTURED 2013 (SEE PHOTOS) TEMESCAL FERROTEC TEM E BEAM CONTROLLER WITH PENDANT CONTROL (SEE PHOTOS) CTI CRYO-TORR 10 VACUUM PUMP WITH REBUILT LEYBOLD D65B ROUGH PUMP. TEMESCAL VERSAVAC 5 VACUUM GAUGE WITH INPUTS FOR 5 T/C GAUGE SENSORS AND TWO ION GAUGES TEMESCAL AUTO PUMP CONTROL WITH VACUUM SYSTEM STATUS DISPLAY SHUTTER CONTROL SUBSTRATE ROTATOR CONTROL TEMESCAL MC-4C MOTOR CONTROL CTI CRYOGENICS TEMPERATURE INDICATOR WITH REGENERATION TIMER TEMESCAL TURRET SOURCE SELECTOR FOR THE 4 POSITION HEARTH THE SECOND RACK HOUSES THE SUBSTRATE HEATER WITH TRANSFORMERS AND PID CONTROL, AS WELL AS CURRENT INDICATORS. SKU: R02X003 3A-10-01(1) 4100LBS - 110IN X 80IN X 102IN

1994 NUAIRE NU-301-536 LAMINAR FLOW 36" WORKSTATION CLASS 5 NO SIDE PANELS - HORIZONTAL LAMINAR FLOW WORKSTATION. VOLTAGE: 115V SINGLE-PHASE OPERATION. FREQUENCY: 60HZ. CURRENT RATING: 8 AMPS. ACCEPTS STANDARD FLUORESCENT BULBS (NOT INCLUDED). TOTAL DIMENSIONS: 78.5" X 62" X 36". WORK ZONE: 36". HEPEX ZERO-LEAK AIRFLOW SYSTEM. MINIHELIC GAUGE. S/N:

[BEACON MEDAES] [6-230912] MEDICAL GAS WALL STATION OUTLET AIR 100 PSIG MAX S/N: 435084-0 - MANUFACTURER: BEACON MEDAES MODEL: 6-230912 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS MEDICAL GAS WALL STATION OUTLET IS IN GOOD CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS MEDICAL GAS WALL STATION OUTLET WAS REMOVED FROM A WORKING SETUP AND HAS NOT BEEN TESTED SINCE ITS REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) BEACON MEDAES 6-230912 MEDICAL GAS WALL STATION OUTLET MEDICAL AIR 100 PSIG MAX SPECIFICATIONS: MANUFACTURER: BEACON MEDAES P/N: 6-230912 FORM: 435084-00 DESCRIPTION: MEDICAL GAS WALL STATION OUTLET SET UP FOR MEDICAL AIR 100 PSIG MAXIMUM LOT CODE: 618 A SKU: Y04S011 1A-02-01-04(1) 2LBS - 6IN X 6IN X 4IN

[TEKTRONIX TLA7AA4] LOGIC ANALYZER MODULE 136 CHANNELS CONFIGURATION: ES TIMING: 8 GHZ STATE SPEED: 450 MHZ MEMORY DEPTH: 32M FOR USE WITH TLA700 SERIES. MANUFACTURER: TEKTRONIX MODEL: TLA7AA4. CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS MODULE IS IN FAIR COSMETIC CONDITION WITH MINOR SCUFFS/SCRATCHES, MARKER WRITING AND ADHESIVE LABEL RESIDUES FROM PRIOR USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS CAME TO US WITH A LARGE ASSORTMENT OF "BAD" TEST EQUIPMENT. WE ASSUME IT IS FAULTY, BUT HAVE NO WAY TO TEST. THIS SALE WILL BE AS-IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) TEK TLA7AA4 ES LA MODULE. SKU: Y09D017 2O-01-03(3) 8LBS - 18IN X 12IN X 7IN

[MILLIPORE XX6310000] PORTABLE INCUBATOR 12V DC POWERED 30-44.5DEGC BAD DOOR LATCH. MANUFACTURER: MILLIPORE. MODEL: XX6310000. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS INCUBATOR IS IN GOOD COSMETIC CONDITION WITH JUST A FEW STAINS FROM PREVIOUS USE. NOTE THERE IS NO BATTERY INCLUDED. THE DOOR LATCH ON THE GLASS INNER DOOR IS DAMAGED AND DOES NOT HOLD THE GLASS DOOR SHUT. THERE IS NO MODEL NUMBER PLATE ON THIS UNIT BUT WE HAVE AN IDENTICAL ONE IN-HOUSE WHICH IS MARKED AS CATALOG NO.: XX6310000. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WHEN WE APPLIED 12V POWER, THE POWER AND WAIT LIGHTS CAME ON. WE SET MAXIMUM TEMPERATURE AND LET THE UNIT SIT FOR SEVERAL HOURS. THE INCUBATOR READY LIGHT CAME ON AND THE TEMPERATURE WAS ABOUT RIGHT, ACCORDING TO THE INCLUDED MERCURY THERMOMETER. NO OTHER TESTING WAS DONE. THE FRONT COVER LATCH HOLDS TIGHT. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) MILLIPORE INCUBATOR SPECIFICATIONS: MANUFACTURER: MILLIPORE. MODEL: XX6310000. PORTABLE INCUBATOR. POWER: 12V DC 1.2A. OUTSIDE DIMENSIONS: 14 1/2"W X 12"D X 12 1/2"H. INSIDE DIMENSIONS: 16CM X 17CM X 11CMH. TEMPERATURE SETTINGS: 44.5O, 41O, 37O, 35O, 30O, AND OFF. SKU: N14D016 1E-13-04(1) 18LBS - 30IN X 18IN X 17IN

[CHEMYX FUSION 100 HIGH-PRECISION SYRINGE PUMP] MANUFACTURER: CHEMYX MODEL: FUSION 100 HIGH-PRECISION SYRINGE PUMP SYRINGE CAPACITY: 0.5UL-60ML MODE: INFUSE ONLY FLOW RANGE: 0.0001 UL/MIN TO 128 ML/MIN LINEAR FORCE: 35LBS STEP RESOLUTION: 0.098UM/STEP ACCURACY: +/-<0.35% INTERFACE: USB-B, RS232 AND TTL PORTS POWER: 110/120VAC SCREEN SIZE: 4.3" LCD TOUCH SCREEN

[OLYMPUS CHBS LABORATORY BINOCULAR MICROSCOPE WITH CH HEAD] MANUFACTURER: OLYMPUS MODEL: CHBS DESCRIPTION: LABORATORY BINOCULAR MICROSCOPE CH HEAD STYLE: BINOCULAR EYE TUBE SIZE: 18MM (NO EYEPIECES INCLUDED) NOSEPIECE: QUADRUPLE FOCUS: COAXIAL COARSE & FINE ADJUSTMENT MECHANISMS STAGE: MECHANICAL X-Y LIGHT SOURCE: BUILT-IN ILLUMINATION WITH VARIABLE INTENSITY (NOT FUNCTIONING - BULB NOT INCLUDED) AS-IS/FOR PARTS.

(1) THERMO ELECTRIC INSTRUMENTS 3240321C00 TEMPERATURE CONTROLLER MANUFACTURER: THERMO ELECTRIC INSTRUMENTS MODEL: 3240321C00 TYPE: ISA-J RANGE: 0-400 C 4-20 MA DC 120 VAC 50/60HZ ALARM/TIMER

[HORIBA CM-210-DC] PFA HF HYDROFLUORIC ACID CONCENTRATION MONITOR CONTROLLER MANUFACTURER: HORIBA MODEL: CM-210-DC HYDROFLUORIC ACID CONCENTRATION MONITOR HGS NO: EZ5M5000 DIGITAL DISPLAY POWER: DC24V / 3.5W FLOW-TYPE SENSOR: E8L43000 MEASURABLE RANGE: 0 - 1/2/5/10/20/50 MASS% SERIAL COMMUNICATION: RS-232C (18) SCREW TERMINALS QTY. 1

[PANALYTICAL PW2239/20] X-RAY XRD TUBE NORMAL FOCUS 2000W 60KV AG SILVER GLASS. MANUFACTURER: PANALYTICAL MODEL: PW2239/20. THIS LOT IS IN FAIR COSMETIC CONDITION WITH SOME LIGHT MARKS OUTSIDE THE STAINLESS, MINOR OXIDATION ON THE LEAD, SOME SCUFFS/STAINS/SCRATCHES ON THE CABLE, AND SOME MINOR RESIDUES INSIDE THE LIQUID COOLING PASSAGES. THE BUYER WILL RECEIVE: (1) PANALYTICAL PW2239/20 XRAY TUBE (1) STAINLESS STEEL HOUSING WITH SWITCH PLATE (1) BLAKE H839-016 HV CABLE (1) PAIR OF CONNECTION COVERS 1002114 & 1002115 (2) LEAD SHEET TO LINE CONNECTION COVER. SPECIFICATIONS: MANUFACTURER: PANALYTICAL TYPE: PW2239/20 X-RAY XRD GENERATION SOURCE NORMAL FOCUS 2000 WATTS 60 KILOVOLTS GLASS TUBE AG SILVER ANODE. 2239201 STAINLESS STEEL HOUSING WITH SWAGELOK AND VCR CONNECTIONS SWAGELOK COMPRESSION FITTINGS FOR TUBE COOLING LIQUID STAINLESS "CLAMSHELL" COVERS PROTECT THE CONNECTOR, WITH LEAD LINER INSIDE COVER HIGH VOLTAGE CABLE INCLUDED!

[AGILENT N4903B J-BERT 2 CHANNELS 12.5 GB/S WITH J20] MANUFACTURER: AGILENT TECHNOLOGIES MODEL: N4903B-ATO-120 J-BERT HIGH-PERFORMANCE SERIAL BERT MOST COMPLETE JITTER TOLERANCE TEST FOR EMBEDDED AND FORWARDED CLOCK DEVICES IDEAL FOR CHARACTERIZING AND STRESSING CHIPS AND TRANSCEIVER MODULES DATA RATE FROM 150 TO 12.5 GB/S SECOND OUTPUT CHANNEL BUILT-IN TUNABLE CDR OPERATING SYSTEM: WINDOWS XP OPTIONS LISTED ON THE LABEL: 002, A01, A02, C13, J10, J11, J20 OPTIONS LISTED IN ABOUT BERT PAGE: C13, J10, A01, J11, CTR, 002, A02, J20 OPTIONS LISTED IN THE SOFTWARE: J10: JITTER SOURCES A01: BIT RECOVERY MODE J11: SSC GENERATION CTR: TUNABLE CDR 002: SECOND OUTPUT CHANNEL A02 SER FER ANALYSIS A03 USB GEN2 COMPLIANCE INSTALLED MODULE: N4903B-J20 OPTION J20 INTERFERENCE CHANNEL WITH IEEE-488 GPIB INTERFACE POWER REQUIREMENT: 100-240V 47-63HZ 450VA THIS BERT IS IN FAIR COSMETIC CONDITION WITH BLEMISHES FROM PRIOR USE. THERE ARE HEAVY DENTS ON TOP, AS WELL AS SCUFFS/SCRATCHES AND ADHESIVE LABEL RESIDUES FROM PRIOR USE. THE TESTER POWERS ON AND LOADS THE INSTRUMENT SOFTWARE. AN ERROR DIALOG COMES UP AUTOMATICALLY, IMMEDIATELY. IT FAILS ITS SELF-TESTS, WITH THE SHOWN MESSAGES. THE TOUCH SCREEN WORKS. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SOLD AS-IS!

[HP 6624A SYSTEM DC POWER SUPPLY] HP 6624A SYSTEM DC POWER SUPPLY 4X 40W OUTPUTS 0-7V, 20V, 50V DAC CH1 BAD -PARTS - MANUFACTURER: HEWLETT PACKARD HP MODEL: 6624A CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS POWER SUPPLY IS IN FAIR COSMETIC CONDITION WITH LOTS OF MINOR SCUFFS/SCRATCHES/STAINS FROM PRIOR USE. THE PLASTIC BRACKETS THAT HIDE THE ENDS OF THE HANDLES ARE CRACKED AND BROKEN. THE KEYBOARD FEELS A LITTLE LOOSE, AND THE KEYS ON THE LEFT SIDE MOVE WHEN ONE OF THE KEYS IS PRESSED; THE BOTTOM LEFT KEY CAN BE PUSHED ALL THE WAY INSIDE THE FACEPLATE! THERE IS A SOUND OF LITTLE BITS OF PLASTIC RATTLING LOOSE INSIDE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SUPPLY IS IN PARTIAL WORKING CONDITION. AT POWER ON IT WILL GIVE REPEATING, ALTERNATING ERRORS, "CV DAC CH1" AND "CC DAC CH1". IT DOES NOT RESPOND TO BUTTON PRESSES. THE DISPLAY WORKS. THE FAN WORKS. WE ARE NOT ABLE TO TEST THE HP-IB INTERFACE. NO OTHER TESTING WAS DONE. THIS IS BEING SOLD AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 6624A SYSTEM DC POWER SUPPLY SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: 6624A SYSTEM DC POWER SUPPLY FOUR, 40 WATT OUTPUTS MAXIMUM OUTPUTS: CHANNELS 1 & 2: 7V 5A / 20V 2A CHANNELS 3 & 4: 20V 2A / 50V 0.8A TWO RANGES FOR EACH OUTPUT (0-7V AND 0-20V, 0-20V AND 0-50V) INDIVIDUALLY PROGRAMMABLE OUTPUTS REMOTE SENSE CAPABLE GPIB COMMUNICATIONS RACK MOUNTING TABS AND SIDE HANDLES (NO FEET) POWER INPUT REQUIREMENT: 100/120/220/240 50/60HZ SKU: Y35D014 48LBS - 25IN X 25IN X 12IN

APPLIED MATERIALS/AMAT 0050-92814 ROUGH COOLDOWN KF50 VACUUM LINE NW/KF-50. MANUFACTURER: APPLIED MATERIALS AMAT. MODEL: 0050-92814. CONDITION: NEW. COMES IN FACTORY SEALED PACKAGING. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) APPLIED MATERALS 0050-92814 ROUGH COOLDOWN KF50 VACUUM LINE. SPECIFICATIONS: MANUFACTURER: APPLIED MATERIALS (AMAT) AMAT PART #: 0050-92814. DESCRIPTION: ROUGH COOLDOWN LINE KF50. TOTAL WEIGHT: 5.85 LBS. CONDITION: NEW. QUANTITY: 1.

(LOT OF 10) VPC VIRGINIA PANEL 18117-510108111 COAXIAL 19-POS ITA POWER MODULES - MANUFACTURER: VIRGINIA PANEL CORPORATION VPC MODEL: 18117-510108111 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THESE MODULES ARE IN GOOD CONDITION WITH A FEW MINOR SCUFFS AND SCRATCHES FROM NORMAL USE, BUT NOTHING MAJOR OR ANYTHING THAT WOULD AFFECT FUNCTION. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THESE MODULES WERE PULLED FROM A WORKING SETUP THAT WAS BEING DECOMMISSIONED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (10) VPC VIRGINIA PANEL 18117-510108111 MINI POWER MODULES SPECIFICATIONS: MANUFACTURER: VIRGINIA PANEL CORPORATION (VPC) MODEL: 18117-510108111 DESCRIPTION: MINI ITA POWER MODULES COLOR/FINISH: GREEN MATERIAL: RYTON R-7 (G10 EPOXY GLASS) CONTACT POSITIONS: 19-POSITION TOTAL WEIGHT: 1.10 LBS. SKU: P47P010 1B-23-03(1) 3LBS - 10IN X 10IN X 5IN