Electronic Lab Test Measurement Equipment Day 1 of 3 day event

[HP] 487657-001 HP 10GBE COPPER SFP+ 3 METER DIRECT DAC CABLE 3M - DIRECT ATTACH CABLE (DAC) CABLE SPEED: 10GBE LENGTH: 3 METERS WEIGHT: 0.50 LBS. CONDITION: NEW QUANTITY: 1

[MICRONOVA MZSM56-14] MICROFIBER 14" FLAT SNAP MOP (24) - MANUFACTURER: MICRONOVA MODEL: MZSM56-14 CONDITION: NEW. COMES IN FACTORY-SEALED PACKAGING. NOTES: NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) MICRONOVA MZSM56-14 MICROFIBER 14" M-ZONE FLAT SNAPMOP IN NOVAPOLY SPECIFICATIONS: MANUFACTURER: MICRONOVA MODEL: MZSM56-14 DESCRIPTION: MICROFIBER 14" M-ZONE FLAT SNAPMOP IN NOVAPOLY SKU: V28O026 5C-08-02(1) 8LBS - 18IN X 18IN X 18IN

[FTS SYSTEMS XE752] SP SCIENTIFIC XE75 TEMPERATURE CYCLING SYSTEM FTS AIR-JET COOLER/HEATER NO HEAT. MANUFACTURER: FTS SYSTEMS MODEL: XE752_01 AIR-JET XE PRECISION TEMPERATURE CYCLING SYSTEM TEMPERATURE RANGE: -75OC TO +225OC THERMAL FORCING UNIT FITS ON THE BENCHTOP SELF-CONTAINED ONLY REQUIRES DRY AIR, NO NITROGEN REQUIRED! MONITOR AND CONTROL FROM AN INTERNAL OR EXTERNAL (SAMPLE-MOUNTED) THERMOCOUPLE SAVE MULTI-STEP PROFILES IN THE WATLOW F4 DIGITAL CONTROLLER RS-232 OR GPIB (IEEE_488) PROGRAMMABILITY TO INTERFACE WITH AUTOMATED TEST EQUIPMENT FLOW RATES AJUSTABLE FROM 1.0 TO 4.0 SCFM (2.0 SCFM GIVES BEST TEMPERATURE CONTROL RANGE) SMALL ENOUGH TO BE RACK-MOUNTED REFRIGERATION UNIT DIMENSIONS: 24" X 15" X 16"H (APPROXIMATELY) BUILT-IN OVERTEMPERATURE SAFETY BUILT-IN LOW-FLOW SAFETY PID DIGITAL CONTROLLER RATED FOR +/-0.5O STABILITY AND REPEATABILITY CONTROL UNIT DIMENSIONS: 10" X 8" X 7" (APPROXIMATELY) TRANSITION SPECIFICATIONS @ 2SCFM -55OC TO +125OC <10 SECONDS +125OC TO -55OC <20 SECONDS POWER: 120V 60HZ 20A REQUIRES CLEAN DRY AIR, 7SCFM WITH -80OC DEWPOINT NO THERMAL CAPS (SAMPLE ENCLOSURES) ARE INCLUDED. INCLUDED: (1) REFRIGERATION UNIT WITH OUTPUT HOSE ATTACHED (1) CONTROLLER (1) CONNECTION CABLE. CONDITION: FOR PARTS OR NOT WORKING. THIS SYSTEM IS IN FAIR COSMETIC CONDITION. THERE ARE LOTS OF SMALL SCUFFS/SCRATCHES/DINGS ESPECIALLY IN THE BIGGER CABINET THAT MAKE IT LOOK A LITTLE ROUGH FROM CLOSE UP. THIS UNIT IS IN PARTIAL WORKING CONDITION. IT DOES COOL DOWN, BUT NOT TO THE FULL RATED COLD TEMPERATURE (ONLY ABOUT -60 OF -75 DEGREES). THERE IS NO HEAT OUTPUT AT ALL. WE ARE NOT SURE WHAT MAY BE WRONG WITH THIS UNIT. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. SKU: S08D006 2A-06-01(1) 190LBS - 48IN X 40IN X 35IN

[UNBRANDED] [DOES NOT APPLY] 12-FT RESIN WORKSTATION WORK TABLE WITH DRAWERS, DOORS, ADJUST-SHELVES, 2 PART TABLE, (8) METAL PANELS AND SIDE PIECES. MANUFACTURER: UNKNOWN, MODEL: UNKNOWN, CONSTRUCTION: RESIN TOP. OVERALL DIMENSIONS: 146 1/4"L X 30"W X 40"H RIGHT COUNTERTOP, 54 1/4"L X 30"W X 1"H LEFT COUNTERTOP, 92"L X 30"W X 1"H, 2 - CABINET SIZE, 54"L X 22"W X 35"H, 8 - DRAWERS, 19 1/2"L X 13"W X 5 3/4"H, 5 - DOORS, 18"L X 18"W X 21"H, 1 - LEFT BACKSPLASH, 92"L X 1"W X 4"H, 1 - RIGHT BACKSPLASH, 54 1/4"L X 1"W X 4"H, 2 - SIDESPLASHES 29"L X 1"W X 4"H, 1 - EXTRA DRAWER COMPARTMENT, 32"L X 26"W X 5"H. IT HAS SCUFFS AND SCRATCHES FROM PREVIOUS USE. ONE OF THE DRAWERS IS MISSING ON THE RIGHT SIDE. ALL THE DOORS AND DRAWERS OPEN/CLOSE EASILY WITH NO PROBLEMS. THE BACKSPLASH IS NOT ATTACHED. IT IS THE RESPONSIBILITY OF THE BUYER TO ATTACH THE BACKSPLASH. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN.

[3M 724] TWO-OPERATOR CONTINOUS WORKSTATION MONITOR FOR ESD WRISTSTRAPS (3) - MANUFACTURER: 3M MODEL: 724 CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THESE MONITORS ARE IN GOOD COSMETIC CONDITION WITH MINOR SCUFFS AND SCRATCHES FROM REGULAR USE BUT NOTHING THAT WOULD AFFECT FUNCTIONALITY. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE MONITORS WERE POWERED ON AND IT LIT UP AND THE ALARM SOUNDED. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (3) 3M 724 TWO-OPERATOR CONTINOUS WORKSTATION MONITOR FOR ESD WRISTSTRAPS SPECIFICATIONS: MANUFACTURER: 3M MODEL: 724 DESCRIPTION: WORKSTATION MONITOR FOR ESD WRISTSTRAPS MONITORS PRIMARY WORKER, WRIST STRAP, WORK SURFACE GROUND CONNECTION MONITORS VISITOR TO WORK STATION AUDIBLE AND VISIBLE ALARMS ADJUSTABLE VOLUME ON AUDIBLE ALARMS OPTIONAL AUDIBLE ALARM FOR MAT INCLUDES OPERATORS RESISTANCE IN TEST CIRCUITS PASSIVE SYSTEM ACTIVATION TEST VOLTAGE & RESISTANCE LIMIT SWITCHES REDUNDANT CONDUCTORS OFFER SUPERIOR PROTECTION ELIMINATES AUDITS AND RECORDKEEPING SKU: Y09G011 1D-20-02(1) 7LBS - 16IN X 8IN X 8IN

HEWLETT PACKARD 53132A UNIVERSAL COUNTER W/ 3GHZ AND HS OVEN. MOSTLY WORKS, BAD HP-IB - PARTS. MANUFACTURER: HEWLETT PACKARD HP MODEL: 53132A. THIS COUNTER IS IN FAIR COSMETIC CONDITION WITH MINOR SCUFFS/SCRATCHES AND STAINS FROM PRIOR USE. THE BUMPERS ARE DIRTIER THAN THE REST. THE CONNECTORS ARE NOT CORRODED, JUST THEY ARE NOT BRIGHT AND SHINY LIKE A NEW BNC OR DSUB CONNECTOR SHOULD BE. THIS COUNTER IS IN PARTIAL WORKING CONDITION. THE PREVIOUS OWNER LEFT A NOTE INDICATING THE HP-IB INTERFACE IS NOT WORKING; WE ARE NOT ABLE TO TEST THIS, NOR THE SERIAL INTERFACE. THE DISPLAY IS BRIGHT AND THE CONTROLS RESPONDED TO BUTTON PRESSES. WE WERE ABLE TO GET ALL CHANNELS TO REGISTER UP TO THEIR MAXIMUM RATED FREQUENCIES, CHANNEL 3 DOWN TO ITS MINIMUM, AND CHANNELS 1 AND 2 DOWN TO 10 HZ, THE LIMIT OF OUR GENERATOR. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1)A COUNTER SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: 53132A UNIVERSAL COUNTER (53132A 030) FREQUENCY RANGE: DC TO 225MHZ (CHANNELS 1&2), 100MHZ-3GHZ (CHANNEL 3) 12 DIGITS PER SECOND RESOLUTION 1-BUTTON MEASUREMENTS WITH HPIB & RS-232 COMMUNICATIONS INSTALLED OPTIONS 010: HIGH STABILITY OVEN TIMEBASE 030: ADD CHANNEL 3, 100-3000MHZ BANDWIDTH. SKU: X34D013 1E-09-04(1) 9LBS - 18IN X 12IN X 9IN

[ROFIN 130400516] LASER SCANNING HEAD WITH LINOS LENS CAMBRIDGE 6230H GALVANOMETER. MANUFACTURER: ROFIN P/N: 130400516 LASER SCANHEAD LENS: LINOS F-THETA-RONA F=254MM 1064NM GALVANOMETERS: CAMBRIDGE TECHNOLOGY 6230H FANCY RED ANODIZED FINISH. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS UNIT IS IN GOOD COSMETIC CONDITION EXCEPT FOR A BROKEN 'WARRANTY VOID' STICKER FROM US OPENING IT. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: WE ARE NOT ABLE TO TEST THIS HEAD. WE HEARD A RATTLING NOISE INSIDE SO WE OPENED IT AND . . . IT WAS A CABLE HITTING THE INSIDE OF THE CASE. NOTHING WAS LOOSE SO WE TOOK PICTURES OF THE GUTS AND CLOSED IT BACK UP AGAIN. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ROFIN 130400516 SCAN HEAD. SKU: V45D007. 13LBS - 12IN X 12IN X 12IN

0605 PACE TURBO FUME EXT LABORATORY FUME EXHAUST SYSTEM 110VAC 60HZ 1PH - MANUFACTURER: PACE MODEL: 8888-0605 CONDITION: USED. THIS FUME IS IN GOOD/FAIR COSMETIC CONDITION WITH SCUFFS, SCRATCHES, AND SOME DISCOLORATION FROM SOLDERING FROM REGULAR INDUSTRIAL USE. ADDITIONALLY, ONE OF THE PLASTIC NUTS THAT HOLD ONE OF THE CIRCLE COVERS IN THE BACK IS BROKEN (SEE PHOTO). COMES IN NON-ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE POWERED ON THIS FUME EXHAUST AND TURNED IT ON TO OBSERVE THE EXHAUST FAN TURN ON, RUN SMOOTHLY, AND AIR EXITING THE SYSTEM. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) PACE 8888-0605 TURBO FUME EXT FUME EXHAUST SYSTEM 110VAC 60HZ 1PH SPECIFICATIONS: MANUFACTURER: PACE MODEL: 8888-0605 TURBO FUME EXT DESCRIPTION: FUME EXHAUST SYSTEM 110VAC 60HZ 1PH SKU: X32H028 1B-18-01(1) 20LBS - 25IN X 19IN X 15IN

[NEWPORT 69922] UNIVERSAL ARC LAMP POWER SUPPLY FOR SOLAR SIMULATORS 800-1800W. MANUFACTURER: NEWPORT MODEL: 69922. THIS POWER SUPPLY HAS AN ISSUE: IT DOES NOT HAVE OPEN CIRCUIT VOLTAGE OR OPEN CIRCUIT TOO LOW, PER USER MANUAL. A NEWPORT TECHNICIAN SAID, "THE POWER SUPPLY IS NOT SENDING ADEQUATE VOLTAGE NEEDED TO IGNITE THE LAMP". IT IS BEING LISTED AS/IS FOR PARTS OR REPAIR ONLY. INCLUDED: (1) NEWPORT 69922 UNIVERSAL ARC LAMP POWER SUPPLY FOR SOLAR SIMULATORS 800W-1800W (1) POWER CORD (1) ORIEL INSTRUMENTS NEWPORT ARC LAMP POWER SUPPLY, MODEL 69922 USER MANUAL. SPECIFICATIONS: MANUFACTURER: NEWPORT MODEL: 69922 SN: 422 UNIVERSAL ARC LAMP POWER SUPPLY FOR 800 TO 1800 WATTS SOLAR SIMULATORS POWER REQUIREMENT: 190-264VAC 1 PHASE 50/60HZ 12A HIGHLY REGULATED FOR A STABLE LIGHT OUTPUT RS-232 COMPUTER INTERFACE FOR REMOTE PROGRAMMING OF LAMP PARAMETERS AND MONITORING OUTPUT SUPPORTS REMOTE POWER ON/OFF CONSTANT POWER OR CONSTANT CURRENT OPERATING MODE AS/IS FOR PARTS OR REPAIR ONLY. 32LBS - 25IN X 25IN X 20IN

SIMCO AEROSTAT XT AIR BLOWER / IONIZER STATIC ELIMINATOR VARIABLE SPEED VARIABLE HEAT ON/OFF. THIS IONIZER IS IN GOOD COSMETIC CONDITION WITH SCUFFS, SCRATCHES, AND SOME DUST FROM REGULAR USE. THE STAND IS MISSING AND NOT INCLUDED. COMES IN NON-ORIGINAL PACKAGING. WE POWERED ON THIS IONIZER AND OBSERVED THE INDICATOR LIGHTS TURN ON, THE FAN BLEW, WAS RESPONSIVE TO THE VARIABLE SPEED CONTROL, AND THE HEATER TURNED ON WHEN ACTIVATED. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) SIMCO AEROSTAT XT AIR BLOWER / IONIZER STATIC ELIMINATOR VARIABLE SPEED SPECIFICATIONS: MANUFACTURER: SIMCO MODEL: AEROSTAT XT DESCRIPTION: AIR BLOWER / IONIZER STATIC ELIMINATOR VARIABLE SPEED VARIABLE HEAT ON/OFF 16LBS - 16IN X 16IN X 10IN

KEYTEK ZAPMASTER ESD TESTING SYSTEM WITH IC ADAPTERS, PLUGINS, COMPUTER - PARTS - MANUFACTURER: KEYTEK MODEL: ZAPMASTER CONDITION: FOR PARTS OR NOT WORKING. THIS SYSTEM IS IN FAIR COSMETIC CONDITION WITH LOTS OF MINOR BLEMISHES FROM PRIOR USE. THERE IS SOME DUST FROM STORAGE ON EVERYTHING, AS WELL AS LOTS OF SCUFFS/SCRATCHES, AND THE BOXES FOR EVERYTHING ARE BADLY SHELF-WORN AND FADED/STAINED. WE PULLED OUT A COUPLE OF TEST ADAPTER BOARDS AND FOUND THE ONES WITH FOAM IN THEIR BOXES HAVE SOME GREEN CORROSION ON THE CONTACT POINTS. THE COMPUTER IS MISSING ITS FRONT PANEL AND HAS NO KEYBOARD OR MONITOR (WE USED OUR OWN KEYBOARD AND MONITOR FOR TESTING). THERE IS A CRACK ON THE TOP EDGE OF THE SLIDING DOOR. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SYSTEM IS IN PARTIAL WORKING CONDITION. THE COMPUTER BOOTS INTO WINDOWS 95 AND YOU CAN PRESS "CANCEL" TO GET PAST THE LOGIN PASSWORD PROMPT. THE KEYTEK SOFTWARE LOADS AND IS ABLE TO COMMUNICATE WITH THE TESTER, BUT WE WERE NOT ABLE TO GET IT TO RECOGNIZE AN INSTALLED TEST BOARD. THE LOCK/UNLOCK BUTTON ON THE TESTER CAUSES THE FIXTURE TO BE PULLED DOWN INTO THE MACHINE, BUT ONLY SOMETIMES WILL SET A GREEN "LOCK" LIGHT. WHEN IT DOESN'T, A GENTLE PRESS ON THE TEST FIXTURE CAUSES THE LIGHT TO COME ON. WE ARE NOT SURE WHAT PROGRAM IS FOR USE WITH WHICH FIXTURE AND THE SYSTEM DIDN'T RECOGNIZE WHEN A FIXTURE WAS INSTALLED ANYWAY, SO WE WERE NOT ABLE TO DO ANY FURTHER TESTING. LOOKING AT THE TIMESTAMPS ON FILES, IT SEEMS THE LAST TIME THIS SYSTEM WAS USED WAS AROUND 2014. THE CMOS BATTERY IN THE COMPUTER IS DEAD SO THE DATE/TIME SETTINGS ARE WRONG. NO OTHER TESTING WAS DONE. THIS SYSTEM IS BEING SOLD AS-IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) ZAPMASTER PLATFORM (1) MCP-1 INTERFACE (1) COMPAQ DESKPRO 4000 COMPUTER WITH 64MB RAM, WINDOWS 95 SOFTWARE: (1) KEYTEK SYSTEM 7 LATCHWARE V 3.27 (1) KEYTEK SYSTEM 7 ZAPWARE V.3.27 (1) VARIOUS FLOPPY DISKS, NOT SURE IF THEY CAN STILL BE READ TEST FIXTURE PCBS: (MODEL NUMBER, PART NUMBER, PACKAGE DESCRIPTION) (1) PLCC-68-3/2C, 67-203-152-00, 68-PLCC (1) TF-QFP-128-2/3B, 67-230-203-02, 128-TQFP (1) TF-BGA-144-1, 67-245-162-00, 256-PIN GENERIC SOCKET WITH 144TBGA 12X12 CRS-HAS-00090A ADAPTER (1) TF-QFP-144-1/1B, 67-213-133-02, 144-TQFP (1) QFP-100-2/2J, 67-205-133-10, 100-TQFP (1) QFP-64-3/1I, 67-205-222-00, 64-TQFP (1) QFP-80-3/1F, 67-208-162-00, 80-TQFP (1) TF-SOIC-32-8/6P 67-214-293-16 8-SOIC (1) TF-QFP-100-2, 67-203-173-04, 100-MQFP (1) PLCC-44-4/2D 67-203-132-00 TESTER INSERTS (2) DH-LT1 LATCHUP MODULE (1) DH-26A, MM EOS/ESD (2) DH-11C HBM <10NS (1) 67-004-172-00 WEDGE BOARD WITH COTO RELAYS (1) HBM FILTER BOARD (1) HBM-2 FILTER BOARD (HAS A MISSING BLACK RING IN ONE HOLE) SPECIFICATIONS: MANUFACTURER: KEYTEK MODEL: ZAPMASTER ESD TESTING SYSTEM MODULAR, WITH INSERTS FOR VARIOUS TESTING TYPES MODULAR, WITH TESTING ADAPTERS FOR VARIOUS IC PACKAGES RUNS ON WINDOWS PC VIA IEEE-488 NOT FULLY FUNCTIONAL PLEASE READ TESTING NOTES! SOLD AS-IS SKU: W34D001 5G-07-02(1) 330LBS - 48IN X 40IN X 48IN

2003 HERMLE Z 400K REFRIGERATED BENCHTOP CENTRIFUGE W/ 2 ROTORS 13500 RPM -10C 120V. MANUFACTURER: HERMLE-LABORTECHNIK TYPE: Z 400K UNIVERSAL REFRIGERATED LABORATORY CENTRIFUGE MAXIMUM SPEED: 13,500 RPM (ROTOR DEPENDENT) TIMER: 1 TO 60 MINUTES OR CONTINUOUS TEMPERATURE RANGE: -10 ... +40 OC KNOBS TO SET PARAMETERS LARGE DIGITAL PARAMETER DISPLAYS MAINTENANCE-FREE INDUCTION DRIVE FOR QUIET AND SMOOTH OPERATION ELECTRONIC LID LOCK AUTOMATICALLY SENSES AND LIMITS ROTORS TO MAXIMUM RATED SPEEDS DISPLAY SPEED IN RPM OR RCF FAST OR SLOW DECELERATION CONTINUOUS FLOW OF AMBIENT AIR THROUGH THE ROTOR CHAMBER PREVENTS SAMPLE TEMPERATURE RISING REFRIGERATION CAN MAINTAIN ALL AVAILABLE ROTORS UNDER 4OC AT MAXIMUM SPEED POWER REQUIREMENT: 120V 50/60HZ 12A MANUFACTURED: 2003. INCLUDED: (1) HERMLE Z400K CENTRIFUGE (1) 44-PLACE 1.5/2ML TUBE ROTOR (1) 12-PLACE 15ML TUBE ROTOR (1) HERMLE ROTOR WRENCH (6) MIDSCI 5ML ADAPTERS WITH STOPPERS

[CHARM SCIENCES NOVALUM II] ATP DETECTION, SANITATION AND ALLERGEN CONTROL. MANUFACTURER: CHARM SCIENCES, MODEL: NOVALUM II. SPECIFICATIONS: ATP DETECTION, SANITATION AND ALLERGEN CONTROL. SKU: V21O003 1E-13-02(1). 4LBS - 10IN X 10IN X 10IN.

[2] RAININ HU-S3 HANG-UPS PIPETTE HOLDERS SHELF-MOUNTING: ANY EDGE, SECURED BY THUMBSCREW ATTACHMENT MATERIAL: PLASTIC COMPATIBILITY: FITS ALL RAININ MANUAL PIPETTES AS WELL AS PIPETMAN, MICROMAN, AND DISTRIMAN S/N: 17004992

[UNKNOWN MAKE] [CLASSIC UNISEX TORSO WITH OPEN BACK] CLASSIC UNISEX TORSO WITH OPEN BACK 21-PIECE W/ BASE. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE MODEL IS IN GOOD SHAPE WITH MINOR SCUFFS AND SCRAPES FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE PIECES REMOVE AND FIT BACK TOGETHER AS THEY SHOULD. NO FURTHER TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) UNKNOWN MAKE / MODEL CLASSIC UNISEX TORSO WITH OPEN BACK 21-PART SPECIFICATIONS: MANUFACTURER: UNKNOWN MODEL: UNKNOWN CLASSIC TORSO IS HAND-PAINTED TRUE TO DETAIL AND MADE OF HIGH-QUALITY PLASTIC TORSO HAS THE UNIQUE FEATURE OF AN OPEN NECK AND BACK SECTION GOING FROM THE CEREBELLUM TO THE COCCYX 7TH THORACIC VERTEBRA REMOVABLE 6-PART HEAD 2-PART STOMACH LUNGS 2-PART HEART LIVER/GALL BLADDER 4-PART INTESTINE KIDNEY HALF BLADDER HALF OPEN BACK BRAIN STANDS APPROXIMATELY 36" TALL SKU: R49C001 2G-01-01(1) 42LBS - 40IN X 25IN X 19IN

[JOBIN YVON HORIBA] VS70 LINEAR ARRAY SPECTROMETER SPECTROGRAPH JY WITHOUT COVERS - MANUFACTURER: JOBIN YVON MODEL: VS70 CONDITION: USED. THIS SPECTROGRAPH IS IN FAIR COSMETIC CONDITION, WITH MINOR SCUFFS/SCRATCHES. WE REMOVED THIS FROM A DECOMMISSIONED TEST SYSTEM AND THE SIDE PANELS WERE AS YOU SEE THEM (WE DON'T HAVE FULL-COVERAGE SIDE PANELS ANYWHERE). THE HANDWRITTEN MODEL NUMBER SUFFIX IS HARD TO READ. WE WERE NOT ABLE TO LOCATE ANY DETAILED SPECIFICATIONS ON THIS MODEL, SORRY. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS WAS REMOVED FROM DECOMMISSIONED EQUIPMENT AND NOT TESTED SEPARATELY. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) JY/HORIBA VS70 SPECTROGRAPH SPECIFICATIONS: MANUFACTURER: JOBIN YVON HORIBA MODEL: VS70-P19 (? MAYBE, IT'S HARD TO READ THE SUFFIX) SPECTROGRAPH BASED ON A HIGH PERFORMANCE ABERRATION CORRECTED CONCAVE GRATING FOCAL LENGTH: 70 MM CONNECTS VIA USB FORMERLY USED WITH A UV LIGHT SOURCE FOR INSPECTION PURPOSES

(1) VWR INTERNATIONAL 61161-273 LIQUID OVERFLOW/SPILL LOUD HIGH ALARM SENSOR MANUFACTURER: VWR INTERNATIONAL MODEL: 61161-273 DESCRIPTION: LIQUID OVERFLOW/SPILL LOUD HIGH ALARM SENSOR DETECTS POTENTIAL DISASTER LOUD, HIGH ALARM DETECTOR CABLE LENGTH IS 3M (10') BATTERY-OPERATED ALARM SOUNDS EVEN DURING POWER OUTAGES

VWR 414004-624 GRAVITY CONVECTION INCUBATOR 70C DIGITAL CONTROL STAINLESS W/DOOR. INCUBATOR VOLUME: 155L (5.5 CU.FT) DRY GRAVITY CONVECTION GLASS INNER DOOR DIGITAL TEMPERATURE CONTROLLER/DISPLAY 1.3" VENTILATION CAP POWDERCOATED STEEL EXTERIOR STAINLESS STEEL INTERIOR ADJUSTABLE SHELF LOCATIONS INTERIOR: 55W X 47D X 60H CM POWER: 120V 60HZ 500W. THE INCUBATOR IS IN FAIR COSMETIC CONDITION WITH MINOR BLEMISHES FROM PRIOR USE. THE WORST ARE SOME SCRATCHES IN THE TOP PANEL, RIGHT THROUGH THE PAINT. THE INSIDE LOOKS PRETTY CLEAN. THERE ARE SCUFFS/SCRATCHES AND SMALL AREAS OF ADHESIVE LABEL RESIDUES OUTSIDE. THE INCUBATOR IS IN GOOD WORKING CONDITION. WE SET 40O AND IT REACHED AND HELD FINE. WE SET 70O AND IT REACHED AND HELD THAT TOO. THE DISPLAY IS BRIGHT AND CLEAR. THE DOORS OPEN AND CLOSE/LATCH EASILY AND QUIETLY. WEIGHT: 225LBS - DIMENSIONS: 48IN X 40IN X 43IN

[AGILENT N4903B] J-BERT HIGH PERFORMANCE SERIAL BERT WITH J20 CANT CALIBRATE-PARTS - MANUFACTURER: AGILENT TECHNOLOGIES MODEL: N4903B J-BERT HIGH-PERFORMANCE SERIAL BERT MOST COMPLETE JITTER TOLERANCE TEST FOR EMBEDDED AND FORWARDED CLOCK DEVICES IDEAL FOR CHARACTERIZING AND STRESSING CHIPS AND TRANSCEIVER MODULES DATA RATE FROM 150 TO 12.5 GB/S SECOND OUTPUT CHANNEL BUILT-IN TUNABLE CDR OPERATING SYSTEM: WINDOWS XP OPTIONS LISTED ON LABELS: UAB, C13, A01, J10, J11, J20, UA2 OPTIONS DESCRIBED IN THE SOFTWARE: J10 JITTER SOURCES A01 BIT RECOVERY MODE J11 SSC GENERATION CTR TUNABLE CDR A02 SER FER ANALYSIS OPTIONS LISTED IN ABOUT SCREEN: C13, J12, A01, J11, CTR, A02, J20 INSTALLED MODULE: N4903-69531 OPTION J20 INTERFERENCE CHANNEL WITH IEEE-488 GPIB INTERFACE POWER REQUIREMENT: 100-240V 47-63HZ 450VA CAN'T CALIBRATE, NEEDS REPAIR! SOLD AS-IS! SKU: Y09D007

[SP SCIENTIFIC XE75 TEMPERATURE CYCLING SYSTEM] FTS SYSTEMS XE753 AIR-JET XE PRECISION TEMPERATURE CYCLING SYSTEM TEMPERATURE RANGE: -75OC TO +225OC THERMAL FORCING UNIT FITS ON THE BENCHTOP SELF-CONTAINED ONLY REQUIRES DRY AIR, NO NITROGEN REQUIRED! MONITOR AND CONTROL FROM AN INTERNAL OR EXTERNAL (SAMPLE-MOUNTED) THERMOCOUPLE SAVE MULTI-STEP PROFILES IN THE WATLOW F4 DIGITAL CONTROLLER RS-232 OR GPIB (IEEE_488) PROGRAMMABILITY TO INTERFACE WITH AUTOMATED TEST EQUIPMENT FLOW RATES AJUSTABLE FROM 1.0 TO 4.0 SCFM (2.0 SCFM GIVES BEST TEMPERATURE CONTROL RANGE) SMALL ENOUGH TO BE RACK-MOUNTED REFRIGERATION UNIT DIMENSIONS: 24" X 15" X 16"H (APPROXIMATELY) BUILT-IN OVERTEMPERATURE SAFETY BUILT-IN LOW-FLOW SAFETY PID DIGITAL CONTROLLER RATED FOR +/-0.5O STABILITY AND REPEATABILITY CONTROL UNIT DIMENSIONS: 10" X 8" X 7" (APPROXIMATELY) TRANSITION SPECIFICATIONS @ 2SCFM -55OC TO +125OC <10 SECONDS +125OC TO -55OC <20 SECONDS POWER: 220V 50HZ (COMPATIBLE WITH 230V 60HZ) REQUIRES CLEAN DRY AIR, 7SCFM WITH -80OC DEWPOINT NO THERMAL CAPS (SAMPLE ENCLOSURES) ARE INCLUDED

KRYOTECH ACCUKOOL BTU TEMPERATURE CONTROL -10 TO 110 DEG. MANUFACTURER: KRYOTECH MODEL: ACCUKOOL BTU CONDITION: USED. THESE CHILLERS ARE IN GOOD COSMETIC CONDITION WITH MINOR BLEMISHES FROM PRIOR USE, MOSTLY 'RACK RASH' ON THE MAIN UNIT, PLUS A FEW MINOR SCRATCHES ON THE TEST HEAD. THE TESTING HEAD SHOWN IN PHOTO 5 IS A LITTLE HARD TO SEE WHAT'S GOING ON. IT IS A MIRROR-POLISHED 1.5" ROUND TEMPERATURE CONTROLLED SURFACE, SURROUNDED BY A SQUARE SILICONE RUBBER FOAM GASKET. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THESE WERE REMOVED FROM A PAIR OF AUTOMATIC TEMPERATURE TESTING STATIONS. ONE WORKED GREAT BEFORE BEING POWERED DOWN FOR THE LAST TIME. THE 3RD PHOTO IS A SCREEN SHOT OF THE TESTING STATION IN ACTION, GOING FROM 110O TO -10O AND BACK AGAIN OVER THE COURSE OF A COUPLE OF MINUTES. THE OTHER TESTING STATION WOULD NOT START ITS COMPRESSOR. WE ARE NOT SURE WHAT IS WRONG WITH THE SECOND UNIT. THE WINNING BIDDER WILL HAVE TO FIGURE OUT HOW TO WIRE THESE UP AND CONTROL THEM AS THE COMPUTER SETUP FORMERLY USED WAS PROPRIETARY AND HAD TO BE SEPARATED FROM THESE PARTS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (2) KRYOTECH ACCUKOOL BTU TEMPERATURE CONTROL UNITS SPECIFICATIONS: MANUFACTURER: KRYOTECH MODEL: ACCUKOOL BTU REFRIGERATED THERMAL FORCING/CONTROL UNIT FOR HEATING OR CHILLING OF YOUR DEVICE UNDER TEST TEMPERATURE RANGE: -10O TO 110O HAS 75MM STROKE PNEUMATIC TESTING FIXTURE CLAMP COMPRESSOR: AMERICOLD 1624-3675 (R-404A, 1945BTUH, 220-240V) CONTROL/COMPRESSOR UNIT IS 19" RACK MOUNTABLE SKU: O17D013 1B-18-06(1) 181LBS - 48IN X 46IN X 28IN

[USED] AGILENT E3644A DC POWER SUPPLY - MANUFACTURER: AGILENT TECHNOLOGIES MODEL: E3644A POWER SUPPLY SINGLE OUTPUT FRONT OR REAR PANEL OUTPUTS REMOTE SENSING CAPABLE WIRED FOR 115V ONLY INPUT POWER OUTPUT: 08VDC 08A, OR 020V 04A GPIB AND RS-232 COMMUNICATIONS NOT WORKING, SOLD AS-IS! SKU: X33D032 1E-11-03(1) 17LBS - 22IN X 15IN X 8IN

[GRAY WOLF] [RH-302] RELATIVE HUMIDITY TEMPERATURE RH PROBE DEWPOINT ABSOL/SPEC USB. RH PROBE RELATIVE HUMIDITY TEMPERATURE DEWPOINT ABSOLUTE HUMIDITY SPECIFIC HUMIDITY WET BULB HUMIDITY RATIO INTERFACE USB.

HAKKO T7/T15-SD3 SOLDERING TIP FOR FM-202/FP-102 PART #: T7/T15-SD3 TIP SHAPE: SD3 FOR IRONS: HAKKO FM-203-HANDPIECE : HAKKO FM-2027(70W) HAKKO FM-204-HANDPIECE : HAKKO FM-2027(70W) HAKKO FX-950-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-951-HANDPIECE : HAKKO FM-2028(70W) HAKKO FX-952-HANDPIECE : HAKKO FM-2028(70W) HAKKO FM-202-HANDPIECE : HAKKO FM-2021(70W) OR HANDPIECE : HAKKO FM-2027(70W) NOTE: THE T15 TIPS HAVE REPLACED THE T7 TIPS. THE ONLY DIFFERENCE IS HAKKO HAS PHASED OUT THE BARCODE FROM THE TIPS.

[RUDOLPH AUTOEL III] LASER ELLIPSOMETER NONDESTRUCTIVE, PRECISION FILM THICKNESS MEASUREMENT SIMPLE TO USE HIGHLY REPEATABLE AUTOMATICALLY TRANSFORMS DELTA AND PSI INTO THICKNESS AND REFRACTIVE INDEX THERMAL PRINTER FOR HARD COPY RESULTS LIGHT SOURCE: HENE RED LASER MAX. WAFER SIZE: 6" MEASURING TIME: 17 SECONDS TYPICAL, 50 SECONDS MAXIMUM THICKNESS RANGE: 10 ANGSTROM TO 30 MICRON

[BIO-RAD 583] SEQUENCING ELECTROPHORESIS SLAB GEL DRYER. MANUFACTURER: BIO-RAD, MODEL: MODEL 583, PART #: 165-1745, SEQUENCING ELECTROPHORESIS SLAB GEL DRYER, 100/120V 5.5A 50/60HZ. THIS DRYER IS IN GOOD COSMETIC CONDITION WITH SCUFFS, SCRATCHES, AND TAPE RESIDUE ON THE ENCLOSURE FROM REGULAR INDUSTRIAL USE AND LABELING FROM THE PRIOR OWNER. THE CLEAR RUBBER COVER HAS A CUT ON ONE SIDE. COMES IN NON-ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE PLUGGED IN THIS DRYER AND OBSERVED THE LED DISPLAY LIGHT UP AND THE UNIT TURNED ON WHEN THE "ON" BUTTON WAS PRESSED. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) BIO-RAD 165-1745 MODEL 583 SEQUENCING ELECTROPHORESIS SLAB GEL DRYER. SKU: X04H023 3A-04-03(1) 30LBS - 25IN X 25IN X 9IN

SIEGER SEARCHPOINT OPTIMA 04204-A-0001 GAS SENSOR W/ HUBBELL KILLARK ENCLOSURE - MANUFACTURER: SIEGER HUBBELL KILLARK MODEL: DOES NOT APPLY CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. ITEM HAS MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: ITEM WAS REMOVED FROM A WORKING ENVIRONMENT. NO TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) SIEGER SEARCHPOINT OPTIMA 04204-A-0001 GAS SENSOR (1) HUBBELL KILLARK HFC 0200/HBK 0400 ENCLOSURE SPECIFICATIONS: MANUFACTURER: SIEGER MODEL: SEARCHPOINT OPTIMA 04204-A-0001 CALIBRATED FOR 0-2000 PPM PROPANE MAX INPUT: 32V; 6W CLASS 1 GROUPS B, C, D MANUFACTURER: HUBBELL KILLARK ENCLOSURES MODEL: HFC 0200 HKB 0400

2004 VIRTIS GENESIS 35 EL PILOT FREEZE DRYER LYOPHILIZER S/N: FREEZE DRYER (LYOPHILIZER) DESIGNED FOR RESEARCH/PILOT USE TO DEVELOP SYSTEMS/PROCESSES 4 COOLING SHELVES 4 SAMPLE TRAYS, STAINLESS STEEL 20" X 10" X 2" WITH LIDS 8" DIAMETER VAPOR PORT LARGE, SMOOTH-WALL CONDENSER FOR EASY DEFROST AND REDUCED TIME BETWEEN RUNS INERT GAS BACKFILL PORT UNDER SAMPLE DOOR INLINE SYSTEM ONLY 25" WIDE, BUT 77" DEEP (OVERALL INCLUDING HANDLES) 1HP LEYBOLD D16B VACUUM PUMP DUAL COPELAND COMPRESSORS ALLEN-BRADLEY MICROLOGIX 1500 PROGRAMMABLE LOGIC CONTROLLER POWER INPUT: 208-230V 1 PHASE 60HZ 30A MANUFACTURED IN 2004

[YAMATO] YAMATO RE71 10 LITER ROTARY EVAPORATOR WITH VERTICAL CONDENSER, FULL GLASSWARE. THIS EVAPORATOR IS IN FAIR COSMETIC CONDITION WITH MINOR BLEMISHES FROM PRIOR USE. THERE ARE SCUFFS/SCRATCHES HERE AND THERE IN THE PAINT, AND THE JOINT BETWEEN THE BATH AND TOWER HAS SOME RESIDUE WHERE WE SAW CONDENSATION DURING OUR TESTING. THERE IS MINOR RESIDUE IN THE GLASS AS WELL. YOU WILL NEED TO SUPPLY MINOR HOSES TO COMPLETE THIS SETUP. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. THIS EVAPORATOR IS IN MOSTLY-WORKING CONDITION. THE ONLY ISSUE WE NOTED IS THAT THE "MEAS" ROTATION SPEED IS ALWAYS LOWER THAN THE "SET" SPEED. THIS MEANS THE EFFECTIVE RANGE WITH AN EMPTY FLASK (IN OUR TESTING) WAS FROM 1 TO 123 RPM. THE TEMPERATURE CONTROL ON THE BATH WORKS, ALL THE WAY UP TO BOILING WATER. THE ELECTRIC LIFT RAISES AND LOWERS THE BATH EASILY. WHEN THE TIMER RAN OUT, IT GAVE A LOUD AUDIBLE ALARM. THE STAND HOLDS ALL THE GLASSWARE SECURELY. THIS IS MARKED FOR USE ON 50HZ BUT IT CAME FROM A PLACE USING 60HZ AND WORKED ON 60HZ FOR US DURING OUR TESTING ALSO. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) YAMATO RE71 EVAPORATOR (1) TRIPLE-SPIRAL VERTICAL CONDENSER (1) 10L EVAPORATOR FLASK (1) 5L CONDENSATE FLASK (1) SAMPLING VALVE (1) 3-WAY COCK VALVE MISCELLANEOUS CLAMPS/BOLTS &C. (1) BATH COVER (1) INSTRUCTION MANUAL (1) WRENCH SPECIFICATIONS: YAMATO SCIENTIFIC COMPANY MODEL: RE71 ROTARY EVAPORATOR MICROPROCESSOR CONTROLLER 10 LITERS EVAPORATOR FLASK 5 LITERS RECEIVING FLASK 20 LITERS HEATED BATH VERTICAL TRIPLE-SPIRAL CONDENSER ROTATION SPEED SETTING: UP TO 127 RPM TEMPERATURE SETTING: AMBIENT +5 TO 110OC 2.5KW BATH HEAT ELECTRIC LIFT HOLLOW-SPINDLE BRUSHLESS MOTOR POWER REQUIREMENT: 220V 50HZ 15A SKU: Y12D013 5A-08-04(1) 230LBS - 52IN X 44IN X 40IN

TEKTRONIX 196-3459-00 TEST LEAD SET FOR P6417 P6418 LOGIC ANALYZER. THIS TEST LEAD SET IS IN GOOD COSMETIC CONDITION WITH ONLY MINOR SCUFFS FROM NORMAL USE AND MOUNTING. COMES IN NON-ORIGINAL PACKAGING. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THIS TEST LEAD SET WAS REMOVED FROM DECOMMISSIONED EQUIPMENT AND HAS NOT BEEN TESTED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) TEKTRONIX 196-3459-00 TEST LEAD SET FOR P6417 P6418 LOGIC ANALYZER SPECIFICATIONS: MANUFACTURER: TEKTRONIX MODEL: 196-3459-00 DESCRIPTION: TEST LEAD SET FOR P6417 P6418 LOGIC ANALYZER SKU: W15H035 1B-14-02(4) 2LBS - 8IN X 8IN X 4IN

[AMETEK DREXELBROOK 700-0001-019] SERIES 1379 KPA OR 200 PSI SENSING ELEMENT - MANUFACTURER: AMETEK DREXELBROOK MODEL: 700-0001-019 CONDITION: NEW OTHER. COMES IN NON ORIGINAL PACKAGING. THIS SENSING ROD IS IN NEW CONDITION WITH MINOR SCUFFS OR SCRATCHES FROM SHELF WEAR. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: NO TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AMETEK DREXELBROOK 700-0001-019 SENSING ELEMENT SPECIFICATIONS: MANUFACTURER: AMETEK MODEL: 700-0001-019 MWP: 1379 KPA OR 200 PSI AT 149O C OR 300O F SENSOR LENGTH: 59"

[UNBRANDED] VERTICAL LAB FREEZER RACKS DOUBLE HANDLE 12-SPACE 26.5"X5.5"X5.25" (3) - MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY. CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE RACKS ARE IN GOOD, USED CONDTION WITH SOME MINOR SCUFFS AND SCRATCHES FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE RACKS WERE REMOVED FROM DECOMMISSIONED ENVIRONMENTS. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. THE UNITS DO NOT INCLUDE SAFETY PINS, AS SHOWN IN THE PHOTOS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (3) VERTICAL LAB FREEZER RACKS DOUBLE HANDLE 12-SPACE 26.5"X5.5"X5.25" SPECIFICATIONS: MANUFACTURER: UNBRANDED MODEL: DOES NOT APPLY LABORATORY FREEZER/STORAGE BACK SPACES: 12-SPACE LENGTH: 26.5" WIDTH: 5.5" DEPTH: 5.25" CONSTRUCTION: STAINLESS STEEL SINGLE HANDLE DESIGN

[HP 8657B RF SIGNAL GENERATOR 100KHZ-2060MHZ +13DBM/-143DBM] BAD KEYBOARD - PARTS - MANUFACTURER: HEWLETT PACKARD HP MODEL: 8657B CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS GENERATOR IS IN FAIR COSMETIC CONDITION WITH LOTS OF SCUFFS/SCRATCHES/RESIDUES FROM PRIOR USE. THERE IS A BIG BROWN STAIN ON ONE SIDE. THE "7" BUTTON IS MISSING FROM THE KEYBOARD. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS GENERATOR IS IN PARTIAL WORKING CONDITION. WE VERIFIED OUTPUT FROM 100KHZ TO 1.6GHZ (THE LIMIT OF OUR COUNTER). WE VERIFIED IT IS ABLE TO GIVE AM AND FM. WE VERIFIED OUTPUT DOWN TO -70DBM (THE LIMIT OF OUR SCOPE). THE DISPLAYS ARE BRIGHT AND CLEAR, AND THE KEYBOARD RESPONDS TO USER INPUTS. WE ARE NOT ABLE TO TEST THE HP-IB INTERFACE. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 8657B SIGNAL GENERATOR SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: 8657B SIGNAL GENERATOR RANGE: 100KHZ TO 1.04GHZ WIDE DYNAMIC RANGE: +13 TO -143.5DBM WITH PROGRAMMABLE AM AND FM MODULATION ABILITIES FULL HP-IB (IEEE-488) PROGRAMMABILITY LOW RESIDUAL FM SKU: Y39D023 2L-01-02(1) 42LBS - 36IN X 25IN X 10IN

[120V 240W] INDUSTRIAL DATA SYSTEMS SPRINT-MT MT-102N AIR MULTI TESTER - PARTS - FOR PARTS OR NOT WORKING. COMES IN NON ORIGINAL PACKAGING. THIS MULTI-AIR TESTER IS IN GOOD CONDITION COSMETICALLY WITH MINOR SCUFFS OR SCRATCHES FROM PREVIOUS USE. THIS UNIT POWERED ON NORMALLY USING A TEST AC POWER CABLE (NOT INCLUDED). WE DID NOT HAVE THE RESORCES TO FULLY TEST THIS UNIT. HOWEVER WE DID APPLY AIR INTO THE UNIT AND THE LED INDICATOR LIT UP AS AIR PRESSURE WAS APPLIED AND THE UNIT MADE A REJECTED READING. NO FURTHER TESTING WAS PERFORMED. THERFORE THIS UNIT IS BEING SOLD AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) IDS SPRINT MT MT-102N AIR MULTI TESTER (2) PROGRAM KEYS SPECIFICATIONS: MANUFACTURER: INDUSTRIAL DATA SYSTEMS MODEL: MT-102N VOLTS: 120 WATTS: 240 SKU: S21A007 2O-08-04(1) 19LBS - 22IN X 15IN X 15IN

2006 SCHOTT ACE I FIBER OPTIC ILLUMINATOR 150W 230V 1PHASE POWER EKE 1 VERY CLEAN MANUFACTURER: SCHOTT MODEL: ACE I CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS ILLUMINATOR IS IN GOOD COSMETIC CONDITION. THE ONLY NOTABLE BLEMISH IS A TRACE OF GREASE ON THE THREADS OF THE KNOB THAT TIGHTENS DOWN ON THE OPTIC FERRULE. THIS UNIT CAME FROM AN ENCLOSED CABINET IN A CLEAN ENVIRONMENT. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS ILLUMINATOR IS IN GOOD WORKING CONDITION. IT GIVES A VARIABLE, BRIGHT LIGHT ACCORDING TO THE DIAL SETTING. NO OTHER TESTING WAS DONE. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) SCHOTT 20510 ACE 1 ILLUMINATOR (1) USED EKE LAMP SPECIFICATIONS: MANUFACTURER: SCHOTT NORTH AMERICA, INC. MODEL: ACE I P/N: 20510 ILLUMINATOR 150 WATTS OUTPUT INPUT: 230-240V 50/60HZ 1.5A USES EKE LAMP ADJUSTABLE OUTPUT, SOLID STATE DIMMER FAN-COOLED (QUIET FAN) ACCEPTS 18MM DIAMETER OPTICS COMPACT RUGGED STACKABLE LOW HOUSING TEMPERATURE MANUFACTURED: 2006 SKU: X43D010 1D-04-02(1) 11LBS - 12IN X 12IN X 12IN

CONOPTICS M25DS AMPLIFIER/DC BIAS POWER SUPPLY FOR LASER MODULATORS MODEL 25DS. MANUFACTURER: CONOPTICS MODEL: M25DS. THIS AMPLIFIER IS IN FAIR COSMETIC CONDITION WITH MINOR SCUFFS/SCRATCHES FROM PRIOR USE. IT CAME FROM A SYSTEM THAT HAD TAPE OVER SOME ADJUSTMENTS AND A SIGN BEGGING USERS TO NOT ADJUST THINGS ...AND THE KNOBS HAVE BEEN REMOVED FROM THE BIAS ADJUSTMENTS. WE VERIFIED IT POWERS ON, THE POWER LIGHT AND FAN BOTH WORK, AND THE DC BIAS METER GOES TO APPROXIMATELY 400V BOTH DIRECTIONS FOR BOTH SUPPLIES. NO OTHER TESTING WAS DONE. THIS UNIT IS MARKED FOR USE WITH 230V AC, BUT WE FOUND IT GAVE THE FULL 400-ISH VOLTS WITH 120V INPUT POWER. INCLUDED: (1) CONOPTICS M25DS AMPLIFIER. SPECIFICATIONS: MANUFACTURER: CONOPTICS MODEL: M25DS HIGH VOLTAGE AMPLIFIER TO DRIVE ELECTRO-OPTICAL MODULATORS INCLUDES A DC BIAS SUPPLY FOR EACH E.O. MODULATOR BANDWIDTH: DC TO 30 MHZ RISE/FALL TIMES: 8 NS MAXIMUM OUTPUT: 175 V P-P, PUSH-PULL OUTPUT IS ADJUSTABLE FROM FRONT PANEL (140-175V) DC BIAS SUPPLY: APPROXIMATELY +/- 400 V DC TYPICAL DRIVE CONFIGURATION: 100 OHMS BALANCED LINE DIGITAL OUTPUT CALIBRATED FOR UNIPOLAR 0-1V PEAK MAXIMUM POSITIVE INPUT POWER REQUIREMENT: 230V 1PHASE 5A. 29LBS - 23IN X 23IN X 12IN

[HAKKO 999-167] (5) HAKKO 999-167 8.25" SUCTION TUBES SUCTION TUBES SIZE: 8.25" ESD SAFE: YES FOR USE WITH: HAKKO HJ3100 FUME EXTRACTION SYSTEM / SMOKE ABSORBER QUANTITY: 5 TUBES

OPTICAL GAGING PRODUCTS OGP QL-20 CONTOUR PROJECTOR 20" OPTICAL COMPARATOR. MANUFACTURER: OPTICAL GAGING PRODUCTS OGP. MODEL: QL-20. DESCRIPTION: CONTOUR PROJECTOR OPTICAL COMPARATOR. SCREEN SIZE: 20". BENCHTOP OR FLOOR MODEL: FLOOR MODEL. MANUAL OR MOTORIZED: MOTORIZED. TRAVEL: 12X6. READOUT: OGP DIMETRIC PLUS KEYPAD. SINGLE LENS MOUNT OR LENS TURRET: MOTORIZED TURRET 5 POSITION. MAGNIFICATION LENSES: 20X, 31.5X, 50X. LENSES PROFILE ILLUMINATION TYPE: MERCURY. SURFACE ILLUMINATION: TUNGSTEN. EDGE DETECTION: OGP INTERNAL PROJECTION. HELIX STAGE: NO. POWER: 115V 17A 50/60HZ. WEIGHT: 1775LBS. DIMENSIONS: 78IN X 50IN X 85IN.

[BAKER] [EG-6252] 6' EDGEGARD LAMINAR FLOW CLEAN BENCH WORKSTATION HOOD HEPA. THE RIGHT SIDE MOTOR IS BAD AND WILL HAVE TO BE REPLACED FOR PROPER OPERATION, THOUGH THE LEFT SIDE MOTOR RUNS SMOOTHLY. THE FLUORESCENT SOCKETS IN THE HOOD WORK BUT SOME OF THE FLUORESCENT BULBS ARE BAD. NO FURTHER TESTING WAS PERFORMED. NOTE: THE RIGHT SIDE MOTORS CAPACITOR WAS SWAPPED OUT BUT IT STILL DID NOT FIX THE ISSUE OF NOT RUNNING. MANUFACTURER: BAKER, MODEL: EG-6252, SN: E-45953, HEPA FILTERS, SINGLE PHASE, 115VAC 60 HZ, 18.52 AMPS, TOTAL RATING 6, INTERNAL LIGHTS, WORK AREA INNER DIMENSIONS: 70"W X 20-1/4"D X 28"H, LAMINAR FLOW: THE FRONT WORK AREA: AIR BLOWN OUT, BOTTOM VENTS: SUCK AIR IN. S/N: E-45953

UNIVERSAL CAROUSEL PIPETTE STAND 8 UPPER HOLDERS & 8 LOWER HOLDERS - DUAL LEVEL, 8 UPPER HOLDING SLOTS AND 8 LOWER HOLDING SPOTS, ABS PLASTIC, WHITE BASE, PURPLE LOWER HOLDER, TRANSPARENT UPPER HOLDER, NON-AUTOCLAVABLE (CLEANABLE WITH SOAP/WATER OR LAB DISINFECTANTS), DIMENSIONS: 16.1"H X 9"W, BASE DIAMETER: 6.2", WEIGHTED BASE TO PREVENT TIPPING

[PXIT] PX2000-105 ACTUATOR CARD - MANUFACTURER: PX INSTRUMENT TECHNOLOGY MODEL: PX2000-105 GENERAL PURPOSE ACTUATOR CARD P/N: 107005 FOR PXI BUS S/N: 107005 SKU: W50D014

[2000W] HEWLETT PACKARD 6572A DC POWER SUPPLY 0-20V 0-100A OUTPUT, 230VAC INPUT - MANUFACTURER: HEWLETT PACKARD HP MODEL: 6572A CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THIS SUPPLY IS IN FAIR COSMETIC CONDITION WITH SOME PRETTY BIG COSMETIC BLEMISHES. THERE ARE A FEW DENTS AND DINGS AROUND THE TOP, AND THE TOP IS HEAVILY SCRATCHED. THE EDGES OF THE FRONT PANEL ARE HEAVILY DINGED AND SCRATCHED AS WELL. THE CLIPS OVER SOME OF THE HANDLE SCREWS ARE BROKEN. THIS UNIT HAS NO FEET AND NO RACK MOUNTING TABS. THE MAIN BLEMISH WORTH NOTING IS THE PLASTIC COVER OVER THE DISPLAY WAS BROKEN, REMOVED, AND REPLACED WITH A THIN SHEET OF CLEAR PLASTIC. THIS LOOKS ALMOST AS NICE AS THE ORIGINAL UNTIL YOU LOOK CLOSELY, AND YOU CAN STILL BARELY SEE BROKEN BITS OF THE ORIGINAL SCREEN PROTECTOR IN A TINY GAP AROUND THE NEW ONE (TOP/RIGHT OF PICTURE 5). THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SUPPLY IS IN GOOD WORKING CONDITION. OUR LOAD CAN ONLY TAKE ABOUT 70A BUT THIS SUPPLY GAVE THAT MUCH AT 20V WITH NO DIFFICULTY. WE USED A PIECE OF HEAVY GAUGE WIRE AS A SHORT AND THIS SUPPLY GAVE 100 AMPS AT ABOUT 25MV! THE KNOBS AND BUTTONS RESPOND TO USER INPUT AS EXPECTED. THE DISPLAY IS CLEAR AND EASY TO READ. NO OTHER TESTING WAS DONE. PLEASE NOTE: THIS SUPPLY WILL NOT OPERATE ON 120VAC INPUT POWER! NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 6572A POWER SUPPLY SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: 6572A DC POWER SUPPLY SIMILAR TO HP/AGILENT/KEYSIGHT 6672A - BUT WITHOUT REMOTE CONTROL INTERFACES POWER OUTPUT: 2KW ADJUSTABLE VOLTAGE OUTPUT: 0 TO 20V DC ADJUSTABLE CURRENT LIMIT: 0 TO 100A REAL-TIME VOLTAGE AND CURRENT OUTPUT DISPLAYS FRONT PANEL KNOB AND BUTTON CONTROLS FAST, LOW-NOISE OUTPUTS DYNAMIC FAN SPEED MINIMIZES ACOUSTIC NOISE REMOTE SENSE CAPABLE OUTPUT TERMINALS CAN BE FLOATED TO +/-240VDC FROM CHASSIS GROUND INPUT POWER: 220/240V AC 1PHASE 50/60HZ 19A MAXIMUM SKU: X36D013 5F-21-02(1) 65LBS - 36IN X 25IN X 12IN

[TEKTRONIX P6417 LOGIC ANALYZER PROBE 16CH 1.8M LONG +/-100MV THRESHOLD ACCURACY] THE PROBE CABLE IS IN GOOD, USED CONDITION WITH MINOR SCUFFS FROM PREVIOUS USE. COSMETIC APPEARANCE MAY VARY SLIGHTLY FROM PICTURED UNIT(S). NOTES: THE ANALYZER WAS REMOVED FROM A DECOMMISSIONED MACHINE. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) TEKTRONIX P6417 LOGIC ANALYZER PROBE 16CH 1.8M LONG +/-100MV THRESHOLD ACCURACY SPECIFICATIONS: MANUFACTURER: TEKTRONIX MODEL: P6417 LOGIC PROBE ANALYZER PROBE CABLE LENGTH: 1.8 METERS 16-CHANNELS THRESHOLD ACCURACY: +/-100 MV CHANNEL-TO-CHANNEL SKEW: +/<1 NS INPUT CAPACITANCE: 2.0 PF TYPICAL-DATA, CLOCK/QUAL MINIMUM SLEW RATE: 0.2 NS MAX OPERATING SIGNAL: 6.5 V P P MINIMUM INPUT PULSE WIDTH SIGNAL: 2 NS

AGILENT 6624A SYSTEM DC POWER SUPPLY FOUR, 40 WATT OUTPUTS MAXIMUM OUTPUTS: CHANNELS 1 & 2: 7V 5A / 20V 2A CHANNELS 3 & 4: 20V 2A / 50V 0.8A TWO RANGES FOR EACH OUTPUT (0-7V AND 0-20V, 0-20V AND 0-50V) INDIVIDUALLY PROGRAMMABLE OUTPUTS REMOTE SENSE CAPABLE GPIB COMMUNICATIONS RACK MOUNTING TABS AND SIDE HANDLES (NO FEET) POWER INPUT REQUIREMENT: 100/120/220/240 50/60HZ

[WINWAY TECH] LAAB6001620 TEST SOCKET BGA31X31-M30X30-1.Q-556, SAPB1004480 TEST SOCKET BGA31X31-M30X30-1.Q-556 SPECIFICATIONS: MANUFACTURER: WINWAY TECH MODEL: MAINFRAME: LAAB6001620 SOCKET: SAPB1004480 DESCRIPTION: TEST SOCKET SIZE: BGA31X31-M30X30-1.Q-556 SKU: Y11U003 1A-03-05-01(2) 2LBS - 6IN X 6IN X 4IN

[UNBRANDED] [DOES NOT APPLY] 11-SPACE VERTICAL LAB FREEZER RACK 26.5"L X 5.5"D X 3.75"W STAINLESS STEEL. LABORATORY FREEZER RACK MATERIAL: STAINLESS STEEL ORIENTATION: VERTICAL CAPACITY: 11-SPACES SINGLE HANDLE DESIGN HEIGHT: 26.5" WIDTH: 3.75" DEPTH: 5.5" SINGLE SPACE DIMENSIONS: 5.5"X3.75"X2.4". CONDITION: USED. COMES IN NON-ORIGINAL PACKAGING. THE RACK IS IN GOOD, USED CONDITION WITH SOME SCUFFS AND SCRATCHES FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE UNIT WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. THE RACK IS STRUCTURALLY SOUND WITH NO DEFECTS. NO FURTHER TESTING WAS PERFORMED AFTER REMOVAL. THE UNIT IS MISSING THE REMOVABLE SECURITY PIN, AS SHOWN IN THE PHOTOS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN.

[SONY UP7100MD] DIGITAL COLOR VIDEO PRINTER - PARTS - MANUFACTURER: SONY MODEL: UP7100MD CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THE PRINTER IS IN HEAVILY USED CONDITION WITH SCUFFS AND SCRATCHES FROM PREVIOUS USE. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THE PRINTER WAS REMOVED FROM A DECOMMISSIONED ENVIRONMENT. THE UNIT WAS POWERED ON. AN ERROR MESSAGE APPEARED REGARDING THE TRAY NEEDING SECURING WHILE IT HAD ALREADY BEEN PUSHED IN. DUE TO THE AGE OF THE UNIT AND NON-FUNCTIONING WHEN TESTING THE UNIT IS BEING SOLD AS/IS FOR PARTS OR REPAIR. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) AS/IS SONY UP7100MD DIGITAL COLOR VIDEO PRINTER (3)BNC I/O W/SYNC CHANNELS SPECIFICATIONS: MANUFACTURER: SONY MODEL: UP7100MD DIGITAL COLOR VIDEO PRINTER VOLTAGE: 100-120 VAC 50/60 HZ DIMENSIONS: 19.5" X 16.75" X 7", 7.5"H WITH FEET CONNECTIONS: 20-PIN SERIAL, BNC I/O, RS-232C CURRENT RATING: 4.6A INCLUDES RIBBON ROLL

STRATAGENE 2400 MICROCENTRIFUGE SPEED: TO 13,000 RPM. THESE CENTRIFUGES ARE OFFERED FOR PARTS OR AS UNITS TO BE REPAIRED ONLY. ONE HAS A GREEN POWER LIGHT, BUT THE LID WILL NOT RELEASE AND THE MOTOR ONLY HUMS INSTEAD OF SPINNING. THE OTHER BOTH RELEASES THE LID AND SPINS THE MOTOR, BUT WE WOULD HESITATE TO CALL IT 'WORKING' BECAUSE OF THE OXIDIZED METAL EVERYWHERE. NOT READY TO USE! SEE NOTES! SKU: N41D026 1D-12-03(1) 18LBS - 25IN X 19IN X 13IN

[GLAS-COL 099A RD4512] RUGGED ROTATOR MIXER WITH WHEEL AND VARIABLE SPEED DRIVE 120V 1.5A. CONDITION: USED. THIS MIXER IS IN GOOD COSMETIC CONDITION WITH SCUFFS, SCRATCHES, AND DINGS FROM NORMAL INDUSTRIAL USE. COMES IN NON-ORIGINAL PACKAGING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: WE PLUGGED IN THIS ASSEMBLY AND POWERED IT ON. WE OBSERVED THE WHEEL ROTATE SMOOTHLY AND AT SPEED WHEN CONTROLLED BY THE VARIABLE SPEED CONTROL. NO ADDITIONAL TESTING WAS PERFORMED. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) GLAS-COL 099A RD4512 RUGGED ROTATOR MIXER WITH WHEEL AND VARIABLE SPEED DRIVE SPECIFICATIONS: MANUFACTURER: GLAS-COL MODEL: 099A RD4512 DESCRIPTION: RUGGED ROTATOR MIXER WITH WHEEL AND VARIABLE SPEED DRIVE 120V 1.5A SKU: W40H007 1D-07-01(1) 14LBS - 18IN X 18IN X 18IN

[HP 6624A] SYSTEM DC POWER SUPPLY 4X 40W OUTPUTS 0-7V, 20V, 50V MANUFACTURER: HEWLETT PACKARD MODEL: 6624A CONDITION: FOR PARTS OR NOT WORKING. COMES IN NON-ORIGINAL PACKAGING. THIS POWER SUPPLY IS IN FAIR COSMETIC CONDITION WITH LOTS OF MINOR SCUFFS/SCRATCHES/STAINS FROM PRIOR USE. THERE IS AN EXTREME AMOUNT OF DUST INSIDE THIS UNIT. THE PLASTIC BRACKETS THAT HIDE THE ENDS OF THE HANDLES ARE CRACKED AND BROKEN. ONE FRONT HANDLE IS MISSING. THERE IS A LINE ON THE DISPLAY FROM A PIECE OF TAPE THAT USED TO HOLD A SIGN ANNOUNCING THE BAD FAN. SOME OF THE OUTPUT TERMINAL SCREWS ARE MISSING. THE PHOTOS SHOW THE EXACT ITEM(S) THE BUYER WILL RECEIVE. NOTES: THIS SUPPLY IS IN PARTIAL WORKING CONDITION. THE FAN DOES NOT WORK. THE KEYBOARD DOES NOT RESPOND TO ALL THE BUTTONS, AND SOME BUTTONS REQUIRE AN EXTRA-FIRM PRESS. WE TESTED ALL FOUR CHANNELS AND VERIFIED THEY WILL GIVE MAXIMUM RATED VOLTAGE AT NO LOAD. THE DISPLAY WORKS. WE ARE NOT ABLE TO TEST THE HP-IB INTERFACE. NO OTHER TESTING WAS DONE. THIS IS BEING SOLD AS/IS. NO MANUALS, CORDS/CABLES, OR ADDITIONAL ITEMS ARE INCLUDED IF NOT LISTED OR SHOWN. INCLUDED: (1) HP 6624A SYSTEM DC POWER SUPPLY SPECIFICATIONS: MANUFACTURER: HEWLETT PACKARD MODEL: 6624A SYSTEM DC POWER SUPPLY FOUR, 40 WATT OUTPUTS MAXIMUM OUTPUTS: CHANNELS 1 & 2: 7V 5A / 20V 2A CHANNELS 3 & 4: 20V 2A / 50V 0.8A TWO RANGES FOR EACH OUTPUT (0-7V AND 0-20V, 0-20V AND 0-50V) INDIVIDUALLY PROGRAMMABLE OUTPUTS REMOTE SENSE CAPABLE GPIB COMMUNICATIONS RACK MOUNTING TABS AND SIDE HANDLES (NO FEET) POWER INPUT REQUIREMENT: 100/120/220/240 50/60HZ 46LBS - 25IN X 25IN X 12IN